Analysis of Plasmalogen Species in Foodstuffs

Ethanolamine plasmalogen (PlsEtn), which is present at high levels in brains, is believed to be involved in neuronal protection. The present study was performed to search for PlsEtn resources in foodstuffs. The foodstuffs examined showed a wide range of PlsEtn contents from 5 to 549 μmol/100 g wet wt. The marine invertebrates, blue mussel, and ascidian had high PlsEtn contents (over 200 μmol/100 g wet wt). Profiling of the molecular species showed that the predominant fatty acids of PlsEtn species were 20:5 (EPA) and 22:6 (DHA) at the sn‐2 position of the glycerol moiety in marine foodstuffs, whereas major PlsEtn species in land foodstuffs were 20:4. Following quantitative analysis by multiple reaction monitoring, the ascidian viscera were shown to contain the highest levels of 18:0/20:5‐PlsEtn and 18:0/22:6‐PlsEtn (86 and 68 μmol/100 g wet wt, respectively). In order to evaluate a neuronal antiapoptotic effect of these PlsEtn species, human neuroblastoma SH‐SY5Y cells were treated with ethanolamine glycerophospholipid (EtnGpl), purified from the ascidian viscera, under serum starvation conditions. Extrinsic EtnGpl from ascidian viscera showed stronger suppression of cell death induced by serum starvation than with bovine brain EtnGpl. The EtnGpl from ascidian viscera strongly suppressed the activation of caspase 3. These results suggest that PlsEtn, especially that containing EPA and DHA, from marine foodstuffs is potentially useful for a therapeutic dietary supplement preventing neurodegenerative diseases, such as Alzheimer's disease (AD).     

Euphorbia tirucalli β-Amyrin Synthase: Critical Roles of Steric Sizes at Val483 and Met729 and the CH–π Interaction between Val483 and Trp534 for Catalytic Action

The functions of Val483, Trp534, and Met729 in Euphorbia tirucalli β-amyrin synthase were revealed by comparing the enzyme activities of site-directed mutants against that of the wild type. The Gly and Ala variants with a smaller bulk size at position 483 predominantly afforded monocyclic camelliol C, which suggested that the orientation of the (3S)-2,3-oxidosqualene substrate was not appropriately arranged in the reaction cavity as a result of the decreased bulk size, leading to failure of its normal folding into the chair–chair–chair–boat–boat conformation. The Ile variant, with a somewhat larger bulk, afforded β-amyrin as the dominant product. Intriguingly, various variants of Trp534 exhibited significantly decreased enzymatic activities and provided no aberrantly cyclized products, although the aromatic Phe and Tyr residues were incorporated and the steric sizes of the aliphatic residues were altered. Therefore, the Trp534 residue does not stabilize the transient cation through a cation–π interaction. Furthermore, the Trp residue, with the largest steric bulk among all natural amino acids, is essential for high enzymatic activity. Robust CH–π complexation between the Val483 and Trp534 residues is proposed herein. Altering the steric bulk at the Met729 position afforded the pentacyclic skeletons. Thus, Met729 is positioned at the E-ring formation site. More detailed insights into the functions of the Val483, Trp534, and Met729 residues are provided by homology modeling.     

Production of flexible metal matrix composites reinforced with continuous Si-Ti-C-O fibers by atmospheric plasma spraying

An investigation of the production of aluminum matrix composite sheet reinforced with continuous Si-Ti-C-O fibers was performed by a plasma spraying method. The unidirectionally reinforced Si-Ti-C-O fiber/Al prepreg sheet (300 by 3000 mm, 0.1 to 0.15 mm thick, with 40 vol. % Fiber) was fabricated by plasma spraying under atmospheric conditions. The depth of the oxidation layer formed on the surface of the metal matrix composite (MMC) prepreg sheet was found to be about 200 Å, and this value is almost independent of the atmosphere during plasma spraying. The fibers homogeneously disperse and do not contact each other in the matrix of the MMC prepreg. No damage on the surface of the extracted fibers from the MMC prepreg sheet can be observed. The MMC prepreg sheet was used to produce MMC plate by hot pressing at 640 to 680 °C under 9.8 MPa. The flexural strengths in the longitudinal and transverse directions of the MMC plate pressed at 660 °C were 1.0 and 0.25 GPa, respectively.     

Effect of Moisture on the High-Temperature Stability of Unidirectionally Solidified Al2O3/YAG Eutectic Composites

The corrosion resistance of a unidirectionally solidified alumina/yttrium aluminum garnet (Al₂O₃/YAG) eutectic mixture was investigated at high temperature. Samples were exposed to high temperature (1200°–1800°C) in different atmospheres, which included argon, argon/water vapor, air, and air/water vapor. The most important microstructural changes occurred at the interface between the YAG and the Al₂O₃. Those changes consisted of localized thermal grooving, especially when the corrosive atmosphere contained water vapor. The samples exhibited significant weight loss at high temperature (1800°C) after 20 h of exposure. The calculated volume gain that was induced by the increased surface relief was low and limited, except when the corrosive atmosphere contained air, which indicated that the presence of air (particularly oxygen) induced a more-active corrosion process. On the other hand, no change in the flexural strength was observed, even after 100 h at 1800°C in a humid atmosphere, because of the cross-linked structure of the composite, which limited propagation of the groove.     

Freezing step controls the mannitol phase composition heterogeneity

Freeze-dried samples were prepared from D-mannitol solution by selected freezing conditions. Crystalline structures of prepared samples were determined by XRD analysis, and distributions of the various crystal structures of mannitol were obtained for each sample. It was found that the amount of each polymorph was quite well correlated to the freezing conditions, namely the ice crystal nucleation temperature and the cooling rate. In case of samples prepared at fast cooling rates, the samples where the ice crystals nucleated at higher temperature contained much more stable form than the samples nucleated at lower temperature. Besides, the samples prepared at slow cooling rates predominantly contained stable crystalline forms despite of the variation of nucleation temperatures. Moreover, the experimental results also indicated that the various polymorphs were also distributed vertically through the sample along the direction of the heat flux during freezing. The tendency of the polymorph distribution through the freeze-dried cake was also elucidated by using the simulated temperature profiles during freezing. Thus, the profiles of mannitol polymorphs after the freezing derived from the temperature distributions could predict the global tendency of polymorphism behaviour, and, consequently, would be useful to achieve quality control of freeze-dried formulations.     

Concentration of aqueous dye solution by freezing and thawing

The concentration phenomena during freezing and thawing were investigated to study the feasibility of freeze–thaw process as a concentration operation. An aqueous dye solution was employed as a model binary eutectic solution. The localised concentration in the frozen matrix was determined, and the concentration profile of the melting solution during thawing was examined. It was found that the solution obtained during thawing showed higher concentration than the original solution, and the concentration did not correspond to the amount of solute localised in the frozen matrix. It was suggested that the concentration phenomena during thawing would be governed by the melting droplet growth rate at the melting interface and by the diffusion rate of solute from eutectic phases to the droplet.     

Ethanol Conversion on MCM-41 and FSM-16, and on Ni-Doped MCM-41 and FSM-16 Prepared without Hydrothermal Conditions

MCM-41 and FSM-16 were both prepared using no hydrothermal conditions, and nickel was doped into these catalysts (Ni-MCM-41 and Ni-FSM-16) using a template ion exchange method. FSM-16 and Ni-FSM-16 had greater catalytic activity for the conversion of ethanol than MCM-41 and Ni-MCM-41, indicating that FSM-16 has potential as a catalyst for the conversion of ethanol to propylene.     

Acrolein formation in the oxidation of ethane over silica catalysts supporting iron and cesium

A significant yield of aldehydes was obtained by the partial oxidation of ethane over alkali‐modified Fe/SiO₂ catalysts at 475°C (<2% in the case of Cs–Fe/SiO₂). Not only acetaldehyde and formaldehyde but also acrolein were produced in the present system. There are no reports regarding the catalysts for the direct acrolein formation from partial oxidation of ethane. Such significant promoting effect of alkali‐modified Fe/SiO₂ catalysts in the partial oxidation of hydrocarbons has never been observed. Aldol‐type condensation for formation of acrolein could occur in the partial oxidation of ethane over alkali‐modified Fe/SiO₂ catalysts. This revised version was published online in July 2006 with corrections to the Cover Date.