High-velocity impact experiment of aluminum foam sample using powder gun

Porous materials such as aluminum foam have been investigated for possible use as impact shock absorbers in transportation aeronautic applications. However, the response of aluminum foam during impacts at high velocities of more than 100 m/s is not yet fully understood. A high-velocity impact experiment was therefore carried out to clarify impact shock absorption properties of aluminum foam. A one-stage powder gun was used to accelerate an aluminum foam sample to impact a rigid wall. Velocity and deformation of the aluminum foam sample during impact was studied using a digital high-speed video camera, while the pressure wave in the aluminum foam sample was measured using a PVDF gauge. The experimental observations revealed uneven collapse of the aluminum foam sample structure during high speed impact with a general stress plateau effect, typical for cellular material structures when subjected to quasi-static loading.     

Phase-diagram study for the Al2O3-CaF2-SiO2 system

Phase relations for the Al₂O₃-CaF₂-SiO₂ system were investigated from 1673 to 1723 K. The hotfilament technique was applied to observe a two-liquid region and liquidus for the ternary system. The liquidus saturated with SiO₂ was investigated at 1673 K by using the hot-filament technique and the chemical equilibrium technique. In this system, the addition of Al₂O₃ to the CaF₂-SiO₂ system reduces the congruent temperature. A small substitution of Al₂O₃ for CaF₂ increases the solubility of SiO₂, namely, if the region of liquid phase could be enlarged. These results suggest that Al₂O₃ would be an effective substitute of CaF₂ in slag for steelmaking.     

Numerical nonlinear observers using pseudo‐Newton‐type solvers

In constructing a globally convergent numerical nonlinear observer of Newton‐type for a continuous‐time nonlinear system, a globally convergent nonlinear equation solver with a guaranteed rate of convergence is necessary. In particular, the solver should be Jacobian free, because an analytic form of the state transition map of the nonlinear system is generally unavailable. In this paper, two Jacobian‐free nonlinear equation solvers of pseudo‐Newton type that fulfill these requirements are proposed. One of them is based on the finite difference approximation of the Jacobian with variable step size together with the line search. The other uses a similar idea, but the estimate of the Jacobian is mostly updated through a BFGS‐type law. Then, by using these solvers, globally stable numerical nonlinear observers are constructed. Numerical results are included to illustrate the effectiveness of the proposed methods. Copyright © 2007 John Wiley & Sons, Ltd.     

Role of adsorbed iodine into poly(vinyl alcohol) films drawn in KI/I2 solution

We have investigated the microstructure of the poly(vinyl alcohol) (PVA) films using small- and wide-angle X-ray scattering (SAXS and WAXS, respectively) techniques. The samples were uniaxially drawn in water or KI/I₂ aqueous solution and then dried in an air-oven at 333 K for 1 h prior to SAXS and WAXS measurements. It was found that for the films drawn in KI/I₂ solution PVA chains in the microfibrillar structure are more extended upon the film drawing compared to the case of the films drawn in pure water, which is resulted from the correlation function analysis on the SAXS data. Adsorbed iodines into the film were anticipated to act as junction points between the microfibrils via the formation of the PVA-iodine complexes.     

Determination of organochlorine and pyrethroid pesticides in fruit and vegetables using SAX/PSA clean-up column

A study was conducted to investigate the organochlorine and pyrethroid pesticide residues in fruit and vegetables from market in Malaysia. Gas chromatography with electron capture detector (GC-ECD) was used to determine the concentrations of pesticide residues and SAX/PSA was used as a clean-up. Cypermethrin was detected in 38 of 302 vegetable samples with a mean value of 0.47 mg/kg. The mean value of cypermethrin for tomato, chinese parsley, chinese celery, chilli, brinjal, french beans, green mustard and capsicum ranged from 0.16 to 1.48 mg/kg. The mean values for all samples were below the maximum residue limits (MRLs) allowed by the Malaysian Food Regulations except for brinjal. None of the 206 fruit samples tested showed any pesticide residue.     

Approximate calculation method for integral of mean square value of nonstationary response

The response of the structure subjected to nonstationary random vibration such as earthquake excitation is nonstationary random vibration. Calculating method for statistical characteristics of such a response is complicated. Mean square value of the response is usually used to evaluate random response. Integral of mean square value of the response corresponds to total energy of the response. In this paper, a simplified calculation method to obtain integral of mean square value of the response is proposed. As input excitation, nonstationary white noise and nonstationary filtered white noise are used. Integrals of mean square value of the response are calculated for various values of parameters. It is found that the proposed method gives exact value of integral of mean square value of the response.     

Frequency channel blocking scheme in mesh-topology millimeter-wave broad-band entrance networks

This paper proposes a novel frequency channel blocking (FCB) scheme in mesh-topology millimeter-wave broad-band entrance networks. In the FCB scheme, any frequency channel is determined to be blocked according to not only the network throughput, but also the newly defined fairness index. As the results, the FCB scheme yields better throughput and fairness performances with a little increase in computational complexity compared to the conventional scheme.     

Crystal growth of MgAlB14-type compounds using metal salts and some properties

LEAlB₁₄ (orthorhombic, Imam) (LE = Li, Mg) crystals were grown using metal salts (Li₂CO₃, LiF, LiI, MgO, MgF₂, MgI₂) and crystalline boron from a high-temperature aluminium metal flux. The growth conditions for growing LEAlB₁₄ were established using the starting mixtures of B/LE = 2.0, and Al metal was added to each mixture at a mass ratio of 1:15–20. LEAlB₁₄ crystals from the Al-self flux using metal salts could be obtained from all the different salts. The maximum dimensions of LiAlB₁₄ and MgAlB₁₄ crystals were approximately 18 and 12 mm for the crystals obtained from LiF and MgF₂. The unit-cell parameters of as-grown LEAlB₁₄ are as follows: for LiAlB₁₄, obtained from LiF, a = 0.5846 (2) nm, b = 0.8144 (2) nm, c = 1.0355 (3) nm, V = 0.4930 (2) nm³: for MgAlB₁₄, obtained from MgF₂, a = 0.5845 (2) nm, b = 0.8114 (2) nm, c = 1.0330 (3) nm, V = 0.4899 (3) nm³. Microhardness, oxidation resistance and magnetic susceptibility of these materials are described in detail.     

Development of a new sensorless vector‐controlled and transmissionless electric vehicle using a permanent‐magnet synchronous motor

One of the most important technologies for electric vehicles (EVs) will be drive control technology for the main motor. It is desired that the drive control technology have the following characteristics. (1) It does not require a position/speed sensor for controlling motor drive, which has been mounted on the rotor shaft. (2) It has vector controls that can produce torque quickly, efficiently, and/or precisely. (3) It has wide driving‐range and allows developing EVs with no variable transmission. This paper proposes new drive control technologies for such EVs using a permanent‐magnet synchronous motor as a main motor, and verifies its usefulness through development of an actual EV that can drive on public roads. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 83–94, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20459