Development of local-scale high-resolution atmospheric dispersion model using large-eddy simulation. Part 3: turbulent flow and plume dispersion in building arrays

We have developed a LOcal-scale High-resolution atmospheric DIspersion Model using Large-Eddy Simulation (LOHDIM-LES) to assess the safety at nuclear facilities and to respond to emergencies against accidental or intentional release of radioactive materials (e.g., a terrorist attack in an urban area). In Part 1, the unsteady behavior of a plume over a flat terrain was successfully simulated. In Part 2, a new scheme to generate a spatially developing turbulent boundary layer flow was proposed. Then, the large-eddy simulation (LES) model for turbulent flow and plume dispersion around an isolated building was validated. In this study, we extend the LES model to turbulent flows and plume dispersion in various building arrays that represent typical urban surface geometries. Concerning the characteristics of flow and dispersion in building arrays, the flow patterns associated with obstacle densities and the distribution patterns of mean and root-mean-square (r.m.s.) concentrations agree well with those of the wind tunnel experiments. It is shown that the LES model successfully simulates the unsteady behaviors of turbulent flows and plume dispersion in urban-type surface geometries.     

Solid and thermal properties of ABA‐type triblock copolymers designed using difunctional fluorine‐containing polyimide macroinitiators with methyl methacrylate

BACKGROUND: ABA‐type poly(methyl methacrylate) (PMMA) and fluorine‐containing polyimide triblock copolymers are potentially beneficial for electric materials. In the work reported here, triblock copolymers with various block lengths were prepared from fluorine‐containing difunctional polyimide macroinitiators and methyl methacrylate monomer through atom‐transfer radical polymerization. The effects of structure on their solid and thermal properties were studied. RESULTS: The weight ratios of the triblock copolymers derived using thermogravimetric analysis were shown to be almost identical to the ratios determined using ¹H NMR. The solid properties (film density and maximum d‐spacing value) and thermal properties (glass transition and thermal expansion) were shown to be strongly dependent on the weight ratios of both PMMA and polyimide components. Furthermore, a porous film, which showed a lower dielectric constant of 2.48 at 1 MHz, could be prepared by heating a triblock copolymer film to induce the thermal degradation of the PMMA component. CONCLUSION: The use of the polyimide macroinitiator was useful in the preparation of ABA‐type triblock copolymers to control each block length that influences the solid and thermal properties. Additionally, the triblock copolymers have great potential in preparing porous polyimides in the application of electric materials as interlayer insulation membranes of large‐scale integration. Copyright © 2009 Society of Chemical Industry     

Microstructural refinement of an As-cast Al-12.6 wt pct Si alloy by repeated thermomechanical treatment to produce a heavily deformable material

A certain degree of cold working is advantageous in developing a fine microstructure with minute silicon crystals for eutectic and/or hypereutectic Al-Si cast alloys. A novel process, repeated thermomechanical treatment (RTMT), was applied to an Al-12.6 wt pct Si cast alloy. The process involves multiple-pass cold working (less than a 20 pct reduction in section area) and heat treatment at 793 K for 3.6 ks. Cold-work annealing was repeated up to about an 80 pct reduction in section from the beginning. The RTMT material showed a refined microstructure with high ductility. Most silicon crystals were fragmented to only a few micrometers and were spheroidized. The RTMT material showed such marked plasticity that it could be wrought up to a 99 pct reduction in section at room temperature. The Cold-worked RTMT materials exhibited an excellent balance between tensile strength and elongation and a higher strain hardening than the cast material.     

Purification and cloning of a thermostable manganese catalase from a thermophilic bacterium

We have purified a heat-stable catalase from a thermophilic bacterium, Thermus species strain YS 8-13. The enzyme was purified 160-fold from crude cellular extracts and possessed a specific activity of 8000 units/mg at 65 degrees C. The purified enzyme displayed the highest activity at pH 7 to 10 and temperatures around 85 degrees C. The catalase was determined to be a manganese catalase, based on results from atomic absorption spectra and inhibition experiments using sodium azide. The enzyme was composed of six identical subunits of molecular weight 36,000. Amino acid sequences determined from the purified protein were used to design oligonucleotide primers, which were in turn used to clone the coding gene. The nucleotide sequence of a 1.4-kb fragment of Thermus sp. YS 8-13 genomic DNA containing a 909-bp open reading frame was determined. The gene encoded a 302-residue polypeptide of deduced molecular weight 33,303. The deduced amino acid sequence displayed a region-specific homology with the sequences of the manganese catalase from a mesophilic organism, Lactobacillus plantarum.     

X-ray absorption fine structure analysis of local structure of CeO2–ZrO2 mixed oxides with the same composition ratio (Ce/Zr=1)

Three types of CeO₂–ZrO₂ (Ce:Zr=1:1 molar ratio) compounds with different oxygen storage/release capacities (OSCs) were characterized by means of the Ce K-edge and Zr K-edge X-ray absorption fine structure (XAFS). In order to investigate the relationship between the OSC and local structure, the quantitative EXAFS curve-fitting analysis was applied. By enhancing the homogeneity of the Ce and Zr atoms in the CeO₂–ZrO₂ solid solution, the OSC performance increased. Especially, the atomically homogeneous Ce_0.5Zr_0.5O₂ solid solution exhibited the highest OSC among these CeO₂–ZrO₂ samples. Additionally, the local oxygen environment around Ce and Zr was remarkably modified by enhancing the homogeneity of the CeO₂–ZrO₂ solid solution. It was postulated that the enhancement of the homogeneity of the CeO₂–ZrO₂ solid solution and the modification of the oxygen environment would be the source for the OSC improvement.     

Analysis of ultrasonic welding process of mild steel and 5052 aluminium alloy

Ultrasonic welding of mild steel sheet (SPCC) and aluminium alloy sheet (A5052) was conducted using two different weld tips of a knurled tip (K-tip) and a curved shape tip without knurled edges (C-tip). Behaviours of the weld tip and the welded materials during the weld process were analysed using a high-speed camera observation and an image correlation. The C-tip welding shows a completely different displacement behaviour from the K-tip welding; a relative motion between the tool tip and A5052 in contact with the tip predominantly occurs in the C-tip in contrast to a relative motion between A5052 and SPCC observed in the K-tip. The joint strength using the C-tip was higher than that using the K-tip under the weld conditions in this study. It is demonstrated that the relative motion behaviour in the C-tip causes a macroscopic deformation of A5052 in the vibration direction. This phenomenon promotes growth of a bonded region, resulting in the increase of joint strength. It is surmised that Fe–Al intermetallic layer forms at the weld interface, and the joint strength consequently decreases for the longer weld time condition.     

Bradykinin stimulates type II alveolar cells to release neutrophil and monocyte chemotactic activity and inflammatory cytokines

In the present study, we evaluated the potential of bradykinin (BK) to induce the release of neutrophil and monocyte chemotactic activity (NCA and MCA) and cytokines from an alveolar type II epithelial cell line, A549 cells. BK stimulated A549 cells to release NCA and MCA in a dose- and time-dependent manner (P < 0.001). Checkerboard analysis revealed that both NCA and MCA involved chemotactic and chemokinetic activity. Molecular sieve column chromatography showed three molecular weight masses (near 19 kd, 8 kd, and 400 d) for NCA and several molecular weight peaks (near 66 kd, 25 kd, 19 kd, 16 kd, and 400 d) for MCA. The release of NCA and MCA was inhibited by cycloheximide and lipoxygenase inhibitors (P < 0.01). The NCA and MCA were inhibited by leukotriene B4 (LTB4) receptor antagonist (P < 0.01), and the concentration of LTB4 was high enough for NCA and MCA. Antibodies to interleukin (IL)-8 and granulocyte colony-stimulating factor (G-CSF) attenuated NCA (P < 0.01), and antibodies to monocyte chemotactic protein-1 (MCP-1), G-CSF, and transforming growth factor (TGF)-beta attenuated MCA (P < 0.01). The levels of IL-8, G-CSF, MCP-1, and TGF-beta increased time dependently (P < 0.01). BK also stimulated the release of ILeukin-6 from A549 cells (P < 0.001). The receptors responsible for the release of NCA, MCA, and individual chemokines involved both BKB1 and BKB2 receptors. These data suggest that BK may stimulate alveolar type II pneumocytes to release inflammatory cytokines, which then may modulate the lung inflammation.     

Sarcoplasmic reticulum genes are selectively down-regulated in cardiomyopathy produced by doxorubicin in rabbits

The clinical utility of doxorubicin, an antineoplastic agent, is limited by its cardiotoxicity. Our objective was to determine whether expression of genes encoding proteins that affect Ca2+ homeostasis were altered in the hearts of rabbits chronically treated with doxorubicin. Twelve male New Zealand white rabbits received an injection of doxorubicin (2.5 mg/kg i.v.) once a week for 8 weeks. Eight rabbits were similarly injected with saline as controls. The cardiac function of both groups was evaluated 8 weeks after the final injection, as were the levels of expression of mRNA for Ca2+ transport proteins in the sarcoplasmic reticulum and plasma membrane. The amount of the sarcoplasmic reticulum Ca2+-ATPase and the Ca2+ uptake capacity of the protein were also quantitated. Cardiac output was significantly decreased in the doxorubicin-treated group (71+/-21 ml/min, P<0.05) compared with the control group (118+/-15 ml/min). The mRNA levels for the sarcoplasmic reticulum proteins were significantly diminished in the doxorubicin-treated hearts: ryanodine receptor-2 (relative expression level compared with controls, 0.35+/-0.13, P<0.01), sarcoplasmic reticulum Ca2+-ATPase (0.56+/-0.13, P<0.01), phospholamban (0.62+/-0.20, P<0.01) and cardiac calsequestrin (0. 57+/-0.26, P<0.01). In addition, both relative amount of sarcoplasmic reticulum Ca2+-ATPase protein (doxorubicin-treated group, 69+/-17% of control, P<0.01) and the Ca2+ uptake capacity (46. 9+/-9.8 nmol Ca2+/mg protein-5 min in doxorubicin group v 63.2+/-10. 4 in the control group, P<0.01) were concomitantly decreased with its mRNA expression level. Conversely, the mRNA levels for the plasma membrane proteins did not differ from those of control rabbits: the dihydropyridine receptor (relative expression level, 1. 03+/-0.30, N.S.), plasma membrane Ca2+-ATPase (0.93+/-0.33, N.S.) and the Na+/Ca2+ exchanger (0.87+/-0.34, N.S.). These findings suggest that a selective decrease in mRNA expression for sarcoplasmic reticulum Ca2+ transport proteins is responsible for the impaired Ca2+ handling, and thus, for the reduced cardiac function seen in the cardiomyopathy induced in rabbits by the long-term treatment with doxorubicin.     

Specific inhibition of Na+,K(+)-ATPase activity by atractylon, a major component of byaku-jutsu, by interaction with enzyme in the E2 state

Acute myocardial infarction (AMI) is known to be associated with a complex neuroendocrine activation, especially concerning sympathetic and renin-angiotensin systems, cortisol, atrial natriuretic peptide and endothelin. Results of our study show that the vasoactive intestinal peptide (VIP), also, is early involved in the neuroendocrine activation occurring in AMI. Plasma concentration of VIP, significantly increased in AMI patients within 6 hours after the onset of chest pain, soon decreased and remained below than normal along the first week. At the 14th day of the AMI, plasma levels of VIP returned into the normal range. A significant increase of VIP plasma concentration is detectable in the first hours of AMI in survived as compared with died patients. The phenomenon seems to be a suitable process to provide an endogenous support to the ischemic heart and to counteract the negative effects of other neuroendocrine activated factors.     

3D-CT cystography with perspective volume-rendering

We evaluated the clinical utility of 3D-CT cystography using the perspective volume rendering technique in 5 patients with disorders of the urinary bladder and prostate. Unlike the conventional orthostatic volume-rendering technique, the capability of optional visual point settlement in the urinary bladder precluded cutting a subset of acquired data for luminal inspection, and permitted observation closer to lesions. Consequently, the technique enabled the evaluation of the accurate size, shape, and relation to adjoining mucosa and the region shaded by bulky tumor. 3D-CT cystography using the perspective volume-rendering technique facilitated 3-D inspection of the bladder lumen.