Iris detection using intensity and edge information

In this paper we propose a new algorithm to detect the irises of both eyes from a face image. The algorithm first detects the face region in the image and then extracts intensity valleys from the face region. Next, the algorithm extracts iris candidates from the valleys using the feature template of Lin and Wu (IEEE Trans. Image Process. 8 (6) (1999) 834) and the separability filter of Fukui and Yamaguchi (Trans. IEICE Japan J80-D-II (8) (1997) 2170). Finally, using the costs for pairs of iris candidates proposed in this paper, the algorithm selects a pair of iris candidates corresponding to the irises. The costs are computed by using Hough transform, separability filter and template matching. As the results of the experiments, the iris detection rate of the proposed algorithm was 95.3% for 150 face images of 15 persons without spectacles in the database of University of Bern and 96.8% for 63 images of 21 persons without spectacles in the AR database.     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.     

Total reflection X-ray spectroscopy as a rapid analytical method for uranium determination in drainage water

Uranium concentrations in drainage water are typically determined by α-spectrometry. However, due to the low specific radioactivity of uranium, the evaporation of large volumes of drainage water, followed by several hours of measurements, is required. Thus, the development of a rapid and simple detection method for uranium in drainage water would enhance the operation efficiency of radiation control workers. We herein propose a novel methodology based on total reflection X-ray fluorescence (TXRF) for the measurement of uranium in contaminated water. TXRF is a particularly desirable method for the rapid and simple evaluation of uranium in contaminated water, as chemical pretreatment of the sample solution is not necessary, measurement times are typically several seconds, and the required sample volume is low. We herein employed sample solutions containing several different concentrations of uranyl acetate with yttrium as an internal standard. The solutions were placed onto sample holders, and were dried prior to TXRF measurements. The relative intensity, otherwise defined as the net intensity ratio of the Lα peak of uranium to the Kα peak of yttrium, was directly proportional to the uranium concentration. Using this method, a TXRF detection limit for uranium in contaminated water of 0.30 µg/g was achieved.     

Effect of annealing on photovoltaic properties and microstructure of conventional and inverted organic solar cells using active bilayer based on liquid‐crystal semiconducting polymer and fullerene

Conventional and inverted organic solar cells of poly[9,9‐dioctyl‐fluorene‐co‐bithiophene] (F8T2) as liquid‐crystal semiconducting polymer and fullerene as electron acceptor were fabricated and characterized. An effect of thermal treatment of the films on annealing condition near glass transition was investigated for tuning optimization and improving the photovoltaic and optical properties. Annealing treatment below the glass transition improved the photovoltaic performance and carrier diffusion in crystal growth of active layer. The X‐ray diffraction patterns indicate a crystalline structure with molecular order of F8T2 in crystal index, 100 as a layer distance between sheets of F8T2 chains. The photovoltaic properties were based on molecular interactions with molecular ordering in active layer at crystal state. As the photovoltaic mechanisms, the F8T2 thin film as p‐type semiconducting polymer worked for electron‐donor layer to support light‐induced generation, carrier diffusion and charge transfer near interface in active layer. Copyright © 2014 John Wiley & Sons, Ltd.