A Novel Approach to the Polaronic Metallic State of Cuprate Superconductors and the d-Wave Pairing Mechanism

The present novel approach consists of two stages: in the first stage the many-electron states of a CuO₆ octahedron or a CuO₅ pyramid are calculated by the first-principles variational method, by taking into account the local distortions of a CuO₆ octahedron or a CuO₅ pyramid. In the second stage a metallic state is constructed in the presence of the local AF ordering constructed by the localized spins. In this metallic state the local distortions are treated in the mean field approximation, so that a pseudopolaronic effect is taken into account. Based on this approach, the hole-concentration dependence of T _c and the isotope effect are calculated for LSCO, and compared with experimental results. This approach leads to d-wave pairing mechanism.     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.     

Application of a novel polypropylene to the insulation of an electric power cable

Cross‐linked polyethylene (XLPE) has been widely adopted as insulating material for high‐voltage power cables up to 500 kV. Further improvement of electrical and thermal properties on insulating material is required in order to increase cable operation efficiency. Therefore, the development of novel insulating material possessing high thermal properties will be necessary. Recent progress of catalysis technology contributes to obtain new polymeric materials which may be applied to electrical insulation. The authors investigated the basic properties of newly developed stereoregular syndiotactic polypropylene (s‐PP) which is synthesized with homogeneous metallocene catalyst. Though recycling of cross‐linked polymers such as conventionally used XLPE may be difficult because of their poor heat deformation, the s‐PP which is not cross‐linked must be suitable for recycling. A series of experiments on its physical and electrical properties gave the following results.

• (1) s‐PP has sufficient flexibility compared with isotactic polypropylene (i‐PP ).
• (2) Both AC and lightning impulse breakdown strength of s‐PP in spite of no cross‐linking are superior to those of XLPE in the temperature range from 25 to 90 °C.
• (3) Degradation by copper of s‐PP is less than that of i‐PP.
• (4) s‐PP/VLDPE blend shows sufficient brittleness temperature for use.

These results suggested that s‐PP should serve as insulating material for power cables at higher‐temperature operation. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(1): 18–26, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002//eej.10210     

Noncompetitive inhibition by L-cysteine and activation by L-glutamate of the iron-oxidizing activity of a mixotrophic iron-oxidizing bacterium strain OKM-9

A mesophilic, mixotrophic iron-oxidizing bacterium strain OKM-9 uses ferrous iron as a sole source of energy and L-glutamate as a sole source of cellular carbon. Uptake of L-glutamate into OKM-9 cells is absolutely dependent on ferrous iron oxidation. Thus, the Fe(2+)-dependent L-glutamate uptake system of strain OKM-9 is crucial for the bacterium to grow mixotrophically in iron medium with L-glutamate. The relationship between iron oxidation and L-glutamate transport activities was studied. Iron oxidase containing cytochrome a was purified 9-fold from the plasma membrane of OKM-9. A purified iron oxidase showed one rust-colored band following disc gel electrophoresis after incubation with Fe(2+). The Fe(2+)-dependent L-glutamate transport system was also purified 14.5-fold from the plasma membrane using the same purification steps as for iron oxidase. Fe(2+)-dependent L-glutamate and L-cysteine uptake activities of OKM-9 were 0.36 and 0.24 nmol/mg/min, respectively, when a concentration of 18 mM of these amino acids was used as a substrate. Both uptake activities were completely inhibited by potassium cyanide (KCN), suggesting that cytochrome a in the iron oxidase is involved in the transport process. The iron-oxidizing activity of strain OKM-9 was activated 1.7-fold by 80 mM L-glutamate. In contrast, the activity was noncompetitively inhibited by L-cysteine. The Michaelis constant of iron oxidase for Fe(2+) was 12.6 mM and the inhibition constant for L-cysteine was 41.6 mM. A marked inhibition of iron oxidase by 50 mM L-cysteine was completely reversed by the addition of 60 mM L-glutamate. The results suggest the possibility that iron oxidase has a binding site for L-cysteine and the cysteine first bound to the iron oxidase was replaced by the added L-glutamate.     

Modification of physicochemical properties of actin filaments suppresses cell fragmentation in the execution phase of staurosporine-induced apoptotic processes

Effects of jasplakinolide (JSP), a stabilizer of F-actin, and latrunculin A (LTA), a destabilizer of F-actin, on a series of events occurring in the execution phase of staurosporine (STS)-induced apoptotic processes were studied using human osteosarcoma 143B cells. Time-dependent apparent increases of the population of cells with collapsed membrane potential of mitochondria (Delta Psi(m)) caused by STS treatment were not due to actual decreases in the Delta Psi(m) per cell, but due to the fragmentation of cells resulting in decreases in the number of active mitochondria per cell. Decreases in the Delta Psi(m) in fragmented cells occurred late in the execution phase. Both JSP and LAT failed to prevent STS-induced release of cytochrome c from mitochondria followed by the activation of caspases 3 and 9, the cleavage of poly (ADP-ribose) polymerase (PARP) and apoptotic nuclear fragmentation. However, both drugs prevented STS-induced apoptotic cell fragmentation and decreases in the Delta Psi(m). These results indicate that physicochemical states of actin filaments play a certain role in the execution phase of STS-induced apoptotic processes.     

Evaluation of TEM samples of an Mg-Al alloy prepared using FIB milling at the operating voltages of 10 kV and 40 kV

Transmission electron microscopy (TEM) samples of an Mg-Al alloy has been prepared using a Ga-focused ion beam (FIB) milling at two different operating voltages of 10 kV and 40 kV to investigate the influence of the FIB energy on the sample quality. The fine structures of the samples have been studied using a high resolution TEM, and the concentration of the implanted Ga was analysed using an energy dispersive X-ray (EDX) analysis. The result of the TEM observation revealed that point defects were introduced to the sample finally milled at 40 kV but not at 10 kV. However, crystal lattice images and electron diffraction patterns were clearly observed on both the samples. The typical influence of the FIB energy was indicated in the elemental analysis. The relative Ga concentration in the thin sample finally milled at 10 kV was 1.0-2.0 at% that is less than half of 4.0-6.0 at% of the Ga concentration in the sample finally milled at 40 kV. A comparison between the experimental results of the Ga concentration measurement with simulation was also discussed.     

Volatilization and recovery of mercury from mercury wastewater produced in the course of laboratory work using Acidithiobacillus ferrooxidans SUG 2-2 cells

The iron-oxidizing bacterium Acidithiobacillus ferrooxidans SUG 2-2 is markedly resistant to mercuric chloride and can volatilize mercury (Hg0) from mercuric ion (Hg2+) under acidic conditions. To develop a microbial technique to volatilize and recover mercury from acidic and organic compound-containing mercury wastewater, which is usually produced in the course of everyday laboratory work in Okayama University, the effects of organic and inorganic chemicals on the mercury volatilization activity of A. ferrooxidans cells were studied. Among 55 chemicals tested, the mercury volatilization from a reaction mixture (pH 2.5) containing resting cells of SUG 2-2 (1 mg of protein) and mercury chloride (14 nmol) was strongly inhibited by AgNO3 (0.05 mM), K2CrO7 (1.0 mM), cysteine (1.0 mM), trichloroethylene (1 microM), and commercially produced detergents (0.05%). However, the strong inhibition by trichloroethylene and detergents was not observed when these organic compounds were chemically decomposed using Fenton's method before the treatment of the wastewater with SUG 2-2 cells. When 20 ml of water acidified with sulfuric acid (pH 2.5) containing ferrous sulfate (3%), diluted mercury wastewater (17.5 nmol of Hg2+) and SUG 2-2 cells (0.05 mg of protein) were incubated for 10 d at 30 degrees C, 47% of the total mercury in the wastewater was volatilized and recovered into a trapping reagent for metal mercury. However, when the organic compounds in the mercury wastewater were decomposed using Fenton's method and then treated with A. ferrooxidans cells, approximately 100% of the total mercury in the wastewater was volatilized and recovered.     

Optical topography: practical problems and new applications

We will briefly review the present status of optical topography and then discuss the method of improving practicality, i.e., the signal-to-noise (S/N) ratio and the spatial resolution in observations of higher-order brain functions. The optimum wavelength pair improved the S/N ratio sixfold for deoxyhemoglobin, and new configurations of light irradiation and detection positions doubled the spatial resolution. We also report on developing application fields of optical topography. This modality will bridge the gap between natural sciences, neuroscience, and pedagogy, and show actual real-time brain activity.     

Profile structure of magnetic flux lines in type-II superconductor from a rectangular electron hologram

Profile magnetic configuration of a quantized flux line and flux-line lattice penetrating a type-II superconductor thin foil, niobium, was observed by electron holography and Lorentz microscopy using a 300 kV field-emission electron microscope. Each single flux line was distributed periodically as lattice structure in the mixed state just below its critical temperature of 8.5 K, while at low temperature of 5 K the flux lines were weakly bound as bundles. In order to observe the flux-line distribution over a wide area, discrete Fourier transform reconstruction in the holography was extended for a rectangular area without loss of information and data precision.     

Selection of manipulator system for multiple-goal task by evaluating task completion time and cost with computational time constraints

The focus of this study is on the problem of manipulator system selection for a multiple-goal task by evaluating task completion time and cost with computational time constraints. An approach integrating system selection, structural configuration design, layout design, motion planning, and relative cost calculation is proposed to solve this problem within a reasonable computational time. In the proposed approach, multiple-objective particle swarm optimization (MOPSO) is utilized to search for the appropriate manipulator system with appropriate structural configuration from a set of candidate systems. Particle swarm optimization (PSO) and the nearest neighborhood algorithm are employed in layout design and motion planning due to their high convergence speed. Three methods involving a random search algorithm are compared to the proposed approach through a simulation. The simulation is done with a set of tasks and the result shows the effectiveness of the proposed approach.