Effect of dietary cholesterol on bile-acid composition of gall bladder bile from guinea pigs

The composition of gall bladder bile acids from control and cholesterol-fed, anemic guinea pigs was analyzed by thinlayer-chromatographic and colorimetric techniques. In both control and cholesterol-fed animals, the gall bladder bile acids constituted about one third of the total bile solids. The main component of the bile acids of both groups of animals was chenodexycholic acid, which was predominantly conjugated with glycine. No cholic acid was present although this is the main bile acid in most mammals. The major difference in bile composition between control and cholesterol-fed animals was the conjugation pattern of chenodeoxycholic acid. The ratio of glycochenodeoxycholic to taurochenode-oxycholic acid was high, 6.4, for control animals, and decreased to 2.4 for the cholesterol-fed, anemic animals. Impaired liver function, limited availability of glycine, and greater efficiency of taurocholanic acids for the disposal of excess cholesterol may be involved in the mechanism for this phenomenon. Material in this paper has been submitted in partial satisfaction of the requirements for the degree of Master of Science in Nutition in the Graduate Division of the University of California, Berkeley. A portion of this material was presented at the 7th International Congress of Biochemistry in Tokyo, Japan, August, 1967.     

Effects of ductility on seismic response of piping systems and their implication on design and qualification

This study is concerned with the inelastic seismic response of nuclear power plant piping systems. Two systems are examined. The first one is an idealized four-equal-span pipe run and the second one consists of two configurations modified from an existing pipe run. Detailed finite element seismic time history analyses are performed using the computer program. By varying the various geometrical and physical parameters, calculations are made for a total of 76 cases. The results show that ductility generally contributes to reducing the response of piping systems. An empirical relation between the support load reduction factor and support ductility demand is given and a chart and simple procedures are suggested for the design and qualification of piping supports taking ductility into consideration.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.     

Determination of mass transfer resistance during absorption of carbon dioxide by mixed absorbents in PVDF and PP membrane contactor

In this study, the absorption of carbon dioxide by the absorbent which was composed of 2-amino-2-methyl-l-propanol (AMP) + piperazine (PZ) or methyldiethanolamine (MDEA) + piperazine (PZ) in polyvinylidinefluoride (PVDF) and polypropylene (PP) membrane contactors werewas examined. Three resistances were considered in each hollow fiber, i.e., liquid-film diffusion, membrane diffusion, and gas-film diffusion. The mass transfer resistance of membrane k_m was influenced by the wetting ratio using an absorbent with higher reaction rate. The wetting ratio was affected by contact angle between the membrane and absorbent and the viscosity of absorbent. The calculated absorption rates considering wetting ratio of membrane and using the modified correlation equation of gas-phase mass transfer coefficient were reasonably agreeable to those of measured ones (standard deviation, 4%). The fractional resistance of each transport step during the experiments was then determined. The rate-controlling step was dominated by the resistance of gas-film diffusion with mixed absorbents. The absorption rates of CO₂ increase with the increasing of gas flow rates in the most experimental cases. The resistance of liquid-film diffusion was only important using an absorbent with lower reaction rate. The rate-controlling step was the membrane diffusion only at higher gas flow rate with the absorbent composed of AMP and PZ in PVDF hollow fiber membrane contactor.     

Synthesis and characterization of cobalt nano‐particles through microwave polyol process

This article aims to synthesize and character cobalt nano‐particles through microwave polyol process. At first, cobalt acetate is used as precursor to synthesize cobalt nano‐particles by microwave assisted ethylene glycol in the presence of polyvinylpyrrolidone (PVP) as capping agent. As measured from ion‐coupled plasma (ICP) and thermo‐gravimetric analysis (TGA), the yields of as‐synthesized cobalt particles in average diameters of 40 and 81 nm verified by transmission electronic microscopy (TEM), are 71 and 85%, respectively; and the structure of as‐synthesized cobalt nano‐particle is a face‐center cubic structure analyzed by X‐ray diffraction (XRD). Finally, the as‐synthesized cobalt nano‐particle modified by oleic acid is dispersed in kerosene to character magnetic property. As measured by vibration sample magnetometer (VSM), the saturation magnetisms of cobalt nano‐particles with average diameters of 40 and 81 nm are 39.1 and 29.5 emu/g, respectively, in solution. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

A novel energy‐retaining inverter for AC arc welding machines

A novel energy‐retaining power supply for AC arc welding machines is proposed in this paper. In this kind of power supply, current‐steering diodes connected across the output chokes keep the inductor current continuous and retain the energy during the commutation period, hence reducing the commutation time to ensure a better welding performance. In addition, the stored energy can be released in the next energy transfer cycle to raise the conversion efficiency. The circuit operations and design procedures are likewise examined thoroughly. Experimental results on a prototype inverter for driving a 100‐A AC arc welding machine are recorded to validate the effectiveness of the presented scheme. Copyright © 2010 John Wiley & Sons, Ltd.     

A Multicell Linear Power Amplifier for Driving Piezoelectric Loads

A multicell amplifier is developed by connecting floating signal modules in series to drive piezoelectric devices. The amplifier generates a high voltage gain by summing the individual module gains. The bandwidth equals that of a single module. The multicell amplifier provides a means of achieving high power and can divide the total power dissipation among the modules, because each module delivers the same output voltage and current. A prototype circuit that consists of six floating signal modules exhibits precise linear operation over a wide range of input frequencies and capacitive loads. The circuit provides a plusmn 200-V output swing with a corner frequency of around 100 kHz at a driving capacitive load of 0.1 muF. The slew rate is as high as 115 V/mus, and the maximum output current is plusmn2.6 A. The practicality and performance of the presented modular implementation concepts were verified by the close match between the simulated and experimental results.     

Ge-Rich (70%) SiGe Nanowire MOSFET Fabricated Using Pattern-Dependent Ge-Condensation Technique

A top-down approach of forming SiGe-nanowire (SGNW) MOSFET, with Ge concentration modulated along the source/drain (Si_0.7Ge_0.3) to channel (Si_0.3Ge_0.7) regions, is presented. Fabricated by utilizing a pattern-size-dependent Ge-condensation technique, the SGNW heterostructure PMOS device exhibits 4.5times enhancement in the drive current and transconductance (G_m) as compared to the homojunction planar device (Si_0.7Ge_0.3). This large enhancement can be attributed to several factors including Omega-gated nanowire structure, enhanced hole injection efficiency (due to valence band offset), and improved hole mobility (due to compressive strain and Ge enrichment in the nanowire channel).