A NUMERICAL SCHEME FOR NON-FOURIER HEAT CONDUCTION,PART II: TWO-DIMENSIONAL PROBLEM FORMULATION AND VERIFICATION

A flux-splitting algorithm based on the Godunov numerical scheme developed for the solution of the one-dimensional non-Fourier heat conduction equation by Yeung and Lam [1] is extended for the investigation of thermal wave propagation in rectangular media. The derivation of the solution method and the stability criteria are presented in detail. Physical problems subjected to various boundary conditions (e.g., first, second, and third kinds) can be studied with the numerical scheme. A comparison of the exact solution with the one calculated by the proposed procedure is presented to confirm the validity of the numerical procedure. The numerical scheme is applicable for the study of short-pulse heating in advanced materials, microstructures, thin films, semiconductor devices, and superconductors.     

Distance learning in advanced military education: Analysis of joint operations course in the Taiwan military

High-ranking officers require advanced military education in war tactics for future combat. However, line officers rarely have time to take such courses on campus. The conventional solution to this problem used to take the inefficient correspondence courses. Whereas Internet technologies progress, online course is the current trend for military training. However, the question is what distance learning methodology best suits such a proprietary learning purpose.This study presents a sequential process of developing distance learning courses in advanced military education. Further, the Petri-Net analytical approach is adopted to discover the essential interaction requirements of advanced military education delivered via Internet. This study developed a systematic method for designing e-learning systems according to specific requirements of target courses. The proposed approach starts by comparing on-campus programs with the existing e-learning systems to identify the steps required to transform the program into an e-learning system. After first outlining the pedagogy of the on-campus program, its proposed teaching flow through the Internet is then sketched. Finally, the Petri-Net model was used for in-depth analysis of the stages affecting the learning curve of the line office taking e-learning courses. The example of a “Joint Operations” AME course elaborated the presented approach. An e-learning system prototype was also designed accordingly. Lastly, an experiment was conducted to verify the efficiency of the presented approach.     

Performance of DS SS system under on-off wideband jamming

A performance analysis of a direct sequence spread spectrum (DS SS) system under a periodic on-off wideband jammer is presented. Closed-form results of system bit error rate (BER) are derived for all possible cases of jammer duty cycle     

A single-layer PDMS-on-silicon hybrid microactuator with multi-axis out-of-plane motion capabilities-part II: fabrication and characterization

This paper reports on fabrication and characterization of a new electrostatic microactuator that achieves out-of-plane multi-axis motion with a single silicon device layer. The multi-axis motion with the simple actuator design is possible by incorporating a three-dimensional (3-D) polydimethylsiloxane (PDMS) microstructure. This paper develops a new device processing method named "Soft-Lithographic Lift-Off and Grafting (SLLOG)" to fabricate the previously designed PDMS-on-silicon hybrid actuator structure. SLLOG is a low-temperature (less than 150/spl deg/C) process that allows replica molded PDMS microstructures to be integrated in silicon micromachined device patterns. The fabricated actuator is characterized using laser vibrometry. The experimental results demonstrate actuation motions achieved in three independent axes with fast dynamic response reaching a bandwidth of about 5 kHz. The fabricated PDMS-on-silicon actuator yields a vertical displacement up to 5 /spl mu/m and rotational motions with a 0.6-/spl deg/ tilting angle at a 40-V peak-to-peak ac actuation voltage.     

The effect of oxidants on 2-MIB concentration with the presence of cyanobacteria.

In this study, the effect of three oxidants, sodium hypochlorite, potassium permanganate, and ozone, were tested for the removal of 2-MIB with presence of cyanobacteria. Algae in water samples from the source water of Feng-Shen waterworks (FSW), Taiwan were cultivated at 30 degrees C with continuous light at an intensity between 2,500 and 3,400 lux. During the cultivating process, water samples were analyzed for nutrients, light absorbance at 665 nm (A665), and 2-MIB concentration. The 2-MIB concentrations within the incubated samples increased to as high as 1,000 ng/L to 2,000 ng/L, although no extra nutrients were added to the raw water. After 2 to 3 days incubation, the intracellular 2-MIB concentration was as high as 70% of the total 2-MIB in the samples. The algae that developed were mainly cyanobateria, and more than 90% belonged to the Genus Oscillatorias. An almost 100% removal of both 2-MIB and geosmin in the raw water was observed after ozonation for 10 minutes at a dosing rate of 0.91 mg/l-min. Chlorine and permanganate were much less effective, both removing only about 11% of the 2-MIB within 60 minutes at oxidant concentration of 10 mg/l. Oxidation of the cultivated samples showed that chlorine and permanganate may damage algae cells causing them to release intracellular 2-MIB. During the 60 minutes of reaction time, the total 2-MIB concentrations (intracellular plus dissolved) varied by no more than 10%, however, the ratios between dissolved and total 2-MIB concentrations increased. Two effects of ozonation on the 2-MIB concentration in the cultivated samples were observed when the algae were young, namely 2-MIB release from damaged cells and 2-MIB oxidization. The rates of 2-MIB release and 2-MIB destruction were similar. However, old algae cells were more easily damaged. As a result, intracellular 2-MIB was released faster, and the soluble 2-MIB was destroyed more quickly by ozonation.     

On the J-intergral blunting line applied to linear amorphous polymers

Summary The development of crazes of linear amorphous polymers competes with the occurrence of general yielding in the plastic zone in tensile deformation. For toughened semi-ductile linear amorphous polymers, general yielding in the plastic zone is suppressed by the development of crazes. This suppresion prevents the crack tip from being blunt. Therefore it is recommended that the blunting line be neglected for the evaluation of Jic. For semi-ductile linear amorphous polymers, general yielding in the plastic zone takes place and blunts the crack tip. Thus the blunting line cannot be neglected for the evaluation of Jic.     

Impact of Ge implantation on the electrical characteristics of TiSi2 p+/n shallow junctions with an a-Si (or apoly-Si) buffer layer

A new technology for forming a titanium-silicide shallow junction by combining germanium implantation with an amorphous-silicon (or a poly-silicon) buffer layer has been proposed for MOSFETs. The use of a buffer layer between Ti and Si can avoid the consumption of bulk-silicon and the recession of TiSi₂ film into the source/drain junctions during the silicidation process. In this study, the important role of germanium-implantation on the formation of TiSi₂ contacted p⁺/n junctions was examined. After subsequent implantation of Ge⁺ and B⁺ into the TiSi₂ film, samples were annealed at different temperatures to form p ⁺/n junctions and C54-TiSi₂. Since the penetration of titanium atoms was suppressed due to the germanium-implantation, the periphery leakage and the generation leakage were improved and TiSi₂/Si interfaces were even smooth. Therefore, p⁺/n junctions with a very low leakage current (0.192 nA/cm ² at -5 V) and an excellent forward ideality factor (n≈1.002) can be obtained. From the secondary ion mass spectrometry (SIMS) analysis, the junction depth is 400     

Dual-specificity interaction of HIV-1 TAR RNA with Tat peptide-oligonucleotide conjugates

An oligonucleotide-peptide conjugate, having dual binding capability for a designated RNA, was designed. The peptide portion of the conjugate interacts with a folded domain in the RNA, whereas the oligonucleotide portion hybridizes with a nearby single-stranded region in the RNA. The dual specificity was proven in a model HIV-1 TAR RNA system using an RNase H cleavage assay to assess antisense binding to this RNA. The peptide portion of the conjugate was shown to confer increased specificity on the oligonucleotide.