Optimal power control over multiple time-scale fading channels with service outage constraints

This paper considers the power-control problem for a fading channel in an information-theoretic framework. We derive power-control schemes to optimize ergodic capacity, outage capacity, and capacity with a service outage constraint. The novelty in the paper lies in the use of a two-time-scale fading process and its implications for the channel-state information available at the transmitter.     

Torsional Surface Waves in an Initially Stressed Anisotropic Porous Medium

It is well known that the homogeneous elastic half space does not allow the torsional surface wave to propagate. The present article attempts to study the possibility of propagation of such waves in a liquid-filled initially stressed poroelastic layer over nonhomogeneous half space. The study concludes that torsional surface waves may propagate in the poroelastic layer. The presence of fluid in pores and initial compressive stresses diminishes the velocity. The nonhomogeneity in rigidity and density of the half space also has a certain role to play in initiating, enhancing, or diminishing the velocity of torsional surface waves.     

Investigation of Pt and Pd Modified WO<Subscript>3</Subscript> and ZnO Based Thin Film Sensors for Ethanol Sensing

Ethanol sensors based on different WO₃ and ZnO structures are studied in the present work. The XRD and SEM processes are used to characterize the sensing layer’s surface morphology which reveals the presence of nanoparticle in sensing layer. Further reducing the nanoparticle diameter by the addition of palladium (Pd) and platinum (Pt) for both the sensors (ZnO and WO₃) gives good results on sensitivity, operating temperature, response time and recovery time. Nanoparticle diameter for undoped WO₃, Pd-modified WO₃ and Pt-modified WO₃ based sensors is 11.8, 6 and 5.4 nm, whereas nanoparticle diameter for undoped, Pd-modified and Pt-modified ZnO based sensors is 20, 14 and 11 nm, respectively. Analysis of dynamic response of the sensors when exposed to different concentrations of ethanol vapour (from 500 to 10,000 ppm) and various temperatures indicate the improvement in sensitivity up to 77.2% for WO₃ and 74.6% for ZnO based sensors.     

Synthesis,Characterization, and drug release study of acrylamide‐co‐itaconic acid based smart hydrogel

A new kind of pH and temperature responsive poly(acrylamide‐co‐itaconic acid) hydrogel was prepared by free radical polymerization using ammonium persulfate as initiator and different comonomer ratios. The hydrogels were characterized in terms of chemical composition, swelling‐deswelling behavior, morphology, crystallographic behavior, and drug release properties. All the hydrogels showed high swelling ability in aqueous solutions, the maximum being at pH 7. Swelling decreased on either side of pH 7 (i.e., both in acidic and alkaline region) and increased with increase in temperature. The hydrogel with 10 mol% itaconic acid (IA) absorbed maximum water among the copolymer gels. The cellular structures of the hydrogels were clearly revealed by microscopic analysis and SEM pictures. Swelling of the gels in water followed non‐Fickian type of diffusion principle. The hydrogel was proved to be a controlled release vehicle, for example in drug delivery by using its smart properties. The hydrogel with 10 mol% IA also absorbed maximum amount of drug (ascorbic acid) under study. Incorporation of drug in hydrogel matrix was established from XRD peak analysis. POLYM. ENG. SCI., 55:113–122, 2015. © 2014 Society of Plastics Engineers     

Optimal Sizing of a DBD Ozone Generator Using Response Surface Modeling

Dielectric barrier discharge (DBD) reactors used as ozone generators are well known today and widely used for water treatment and air disinfection. The purpose of this article is to propose an experimental procedure based on the response surface modeling in order to optimize the geometrical dimensions of the cylindrical shape ozone generator, i.e., the discharge gap and the electrodes length. Because an effective ozone generator is expected to give high ozone concentration with a minimum of power requirements, the applied high voltage was associated with the geometrical parameters to carry out a composite centered faces design. Obtained results indicate that for an efficient ozone generator, length of the electrodes needs to be optimized while the discharge gap should be minimized.     

Synthesis and Biological Evaluation of Ferrocenylquinoline as a Potential Antileishmanial Agent

The emergence of resistance against antileishmanial drugs in current use necessitates the search for new classes of antileishmanial compounds. Herein we report the design, synthesis, and evaluation of a novel ferrocenylquinoline for activity against Leishmania donovani. 7‐Chloro‐N‐[2‐(1H‐5‐ferrocenyl‐1,2,3‐triazol‐1‐yl)ethyl]quinolin‐4‐amine ( 1 ) was generated by coupling an iron(II) ethynylferrocene species with 4‐(2‐ethylazido)amino‐7‐chloroquinoline using click chemistry. The synthesized compound 1 was tested for its antileishmanial activity using both promastigote and amastigote stages of L. donovani. Compound 1 showed promising anti‐promastigote activity, with an IC₅₀ value of 15.26 μM and no cytotoxicity toward host splenocytes. From the battery of tests conducted in this study, it appears that this compound induces parasite death by promoting oxidative stress and depolarizing the mitochondrial membrane potential, thereby triggering apoptosis. These results suggest that ferrocenylquinoline 1 is a suitable lead for the development of new antileishmanial drugs.     

Nanoindentation of Soda Lime–Silica Glass: Effect of Loading Rate

Structural and mechanical reliability of glass for both conventional and advanced applications is determined by the rate at which it can deform and sustain externally applied static or dynamic strain at the microstructural length scale. Hence, a large number of nanoindentation experiments were conducted on a thin (∼300 μm) commercial soda lime–silica glass with a 150 nm radius Berkovich tip at a constant load of 10,000 μN as a function of variations in the loading rates in the range of 10–20,000 μN/s. The results showed that the nanohardness of the soda lime–silica glass increased by as much as 74% as the loading rate was increased from 10 to 20,000 μN/s. Further, the presence of serrations in load–depth plots and deformation band formations inside the nanoindentaion cavities were more vividly observed in the nanoindentation experiments conducted at lower loading rates rather than those conducted at higher loading rates. These results are explained in terms of shear stress acting underneath the indenter as well as the time scale of interaction between the nanoindenter and the weak links at local microstructural length scale, which owe their origin to the subtle variations in the composition of the given glass.     

Scale-up of pump-mix mixers using CFD

Effect of scale on the drop size distribution in a pump-mix mixer has been studied. A network of zones model was developed to predict the drop size distribution at different locations in the mixer. Computational fluid dynamics model was used to obtain the flow patterns in the mixer and to identify zones based on the flow patterns. Population balance equation was solved for all the zones of the mixer. The model was validated with the experimental data over a wide range of parameters as well experimental data from the published literature. The model was further extended for scale-up studies. Two different scale-up criteria were studied. It was observed that equal power consumption per unit mass and geometrical similarity is a better scale-up criterion as compared with equal tip speed criterion for pump-mix mixers.     

Inverse and efficiency of heat transfer convex fin with multiple nonlinearities

In this article, we first propose the novel semi‐analytical technique—modified Adomian decomposition method (MADM)—for a closed‐form solution of the nonlinear heat transfer equation of convex profile with singularity where all thermal parameters are functions of temperature. The longitudinal convex fin is subjected to different boiling regimes, which are defined by particular values of n (power index) of heat transfer coefficient. The energy balance equation of the convex fin with several temperature‐dependent properties are solved separately using the MADM and the spectral quasi‐linearization method. Using the values obtained from the direct heat transfer method, the unknown parameters of the profile, such as thermal conductivity, surface emissivity, heat generation number, conduction‐convection parameter, and radiation‐conduction parameter are inversely predicted by an inverse heat transfer analysis using the simplex search method. The effect of the measurement error and the number of measurement points has been presented. It is found that present measurement points and reconstruction of the exact temperature distribution of the convex fin are fairly in good agreement.