Study on possible economic and environmental impacts of electric vehicle infrastructure in public road transport in Kolkata

Transport sector in India accounts for 20 % of total commercial energy demand of the country, of which a considerable amount is consumed in the form of liquid and gaseous fuel. A major part of these fuels are imported by the Government. Apart from the import expenditure, Government of India has subsidized these fuels to make it available at affordable prices. To check the financial burden and achieve environmental benefits, technical advancement in present system or alternative infrastructure is required. The present study examines the possible impacts on economy and environment by the implementation of battery electric vehicles (BEVs) along with the conventional road transport system in metropolitans with a case study of Kolkata. The major impact has been observed in controlling the vehicular emission with a decrease in CO₂ level by 26.27 t per day, on replacement of only 2 % of the present public transport by suitable BEVs. Maintaining similar service for the passengers the electrical energy required by the alternative vehicles has been estimated to be 41,766 kWh per day. This energy has been proposed to be supplied by remodeled fuel stations equipped with solar photovoltaic systems, if charging strategy is based on renewable sources. In case of fuel economy, the infrastructure has shown the potential in reducing the consumption of diesel and autogas (LPG) by 11,654 and 3,256 liter per day, respectively.     

Validation of process technologies for enhancing the safety of low-moisture foods: A review

The outbreaks linked to foodborne illnesses in low-moisture foods are frequently reported due to the occurrence of pathogenic microorganisms such as Salmonella Spp. Bacillus cereus, Clostridium spp., Cronobacter sakazakii, Escherichia coli, and Staphylococcus aureus. The ability of the pathogens to withstand the dry conditions and to develop resistance to heat is regarded as the major concern for the food industry dealing with low-moisture foods. In this regard, the present review is aimed to discuss the importance and the use of novel thermal and nonthermal technologies such as radiofrequency, steam pasteurization, plasma, and gaseous technologies for decontamination of foodborne pathogens in low-moisture foods and their microbial inactivation mechanisms. The review also summarizes the various sources of contamination and the factors influencing the survival and thermal resistance of pathogenic microorganisms in low-moisture foods. The literature survey indicated that the nonthermal techniques such as CO₂, high-pressure processing, and so on, may not offer effective microbial inactivation in low-moisture foods due to their insufficient moisture content. On the other hand, gases can penetrate deep inside the commodities and pores due to their higher diffusion properties and are regarded to have an advantage over thermal and other nonthermal processes. Further research is required to evaluate newer intervention strategies and combination treatments to enhance the microbial inactivation in low-moisture foods without significantly altering their organoleptic and nutritional quality.     

The economics of scan-path design for testability

In this article, scan design for testability (DFT) methods are categorized based on the percentage of storage elements made scannable. The non-scan element state retention problem that occurs in partial scan design methods, in which not all of the storage elements are implemented as scan elements, is discussed. Solutions to this problem are described and the overheads associated with them are discussed. An economic model that allows the costs of a range of scan methods that differ in the percentage of storage elements made scannable to be compared with each other is presented. It is shown that, for systems produced in low volumes, the adoption of full scan DFT can be more cost-effective than partial scan DFT when life-cycle costs are considered if it results in significant reductions in the time taken to get the product to market.     

Deeper into the (infra)red

Generation and coherent electro-optic detection of far-infrared and mid-infrared radiation enable new capabilities compared to photoconductive detection techniques     

Efficacy of itraconazole in children with Trichophyton tonsurans tinea capitis

The microbiology of needle aspirates from 40 inflamed cervical lymph glands was studied for aerobic and anaerobic bacteria, fungi and mycobacteria. Forty-two bacterial, 11 mycobacterial and six fungal isolates were isolated. Aerobic bacteria only were recovered in 11 (27.5%), anaerobes alone in five (12.5%) and mixed aerobic and anaerobic bacteria in seven (17.5%). Mycobacterium sp. were recovered in 11 (27.5%) and fungi in six (15%). The recovery of anaerobes was associated with dental infection. Eighteen aerobic bacteria were isolated and the predominant ones were Staphylococcus aureus (eight isolates) and group A streptococci (four). Twenty-four anaerobic bacteria were recovered and the predominant ones were: Prevotella sp. (six), Peptostreptococcus sp. (five), Propionibacterium acnes (four) and Fusobacterium sp. (three). These findings demonstrate the role of anaerobic organisms in cervical lymphadenitis and the need to culture aspirated material from the glands for both aerobic and anaerobic microorganisms.     

D-optimal designing and optimization of long acting microsphere-based injectable formulation of aripiprazole

This work was aimed to design and optimize a long acting microsphere-based injectable formulation of aripiprazole by using D-optimal experimental design methodology. Microspheres were prepared by solvent evaporation method using PLGA and cholesterol as release rate retardant materials. The microspheres were characterized for their encapsulation efficiency, particle size, surface morphology, residual solvent content, and drug release behavior. Contour plots were plotted to study the encapsulation and release behaviour of the drug from the microspheres. Desirability technique was used for the optimization of microsphere formulation composition. By using an optimum blend of drug and cholesterol in the microsphere formulation it was possible to attain a consistent drug release for a period of 14 days. The results have confirmed that the D-optimal experimental design technique can be successfully employed for designing the long acting microsphere dosage form.     

Optimization and evaluation of microwave-assisted synthesis of magnetite as a carrier for targeted drug delivery system

ABSTRACT

The present research work is a novel cost-effective method for synthesis of magnetite. Magnetite is a carrier which is used in the targeted drug delivery system. The conventional methods of preparation of magnetite take around 6–7 h for the completion of reaction; moreover, the particle size of magnetite which we get by the conventional methods is above 5 µm, so the present work aims at preparing magnetite with microwave assistance which has found to reduce reaction time with particle size obtained below 5 µm. The aim of this study was to optimize magnetite synthesis using 2³ factorial design by Design-Expert software. Magnetites were synthesized using oxidation of ferrous sulfate. In the next step, the effects of different variables on particle size are studied, including the stirring speed, microwave power (W), and stirring time. Based on the type and the variables studied, eight formulations were designed using factorial design method, and were then prepared, and their particle size was determined. Finally, selected magnetite syntheses were evaluated from the viewpoints of scanning electron microscopy (SEM) and x-ray diffraction (XRD). Results revealed that magnetite obtained from the solutions generated Design-Expert software could be selected as the best and optimized formulations due to their lowest particle size.     

A nanoporous interferometric micro-sensor for biomedical detection of volatile sulphur compounds

A simple one-step NaCl-assisted microwave-solvothermal method has been developed for the preparation of monodisperse α-Fe₂O₃ mesoporous microspheres. In this approach, Fe(NO₃)₃ · 9H₂O is used as the iron source, and polyvinylpyrrolidone (PVP) acts as a surfactant in the presence of NaCl in mixed solvents of H₂O and ethanol. Under the present experimental conditions, monodisperse α-Fe₂O₃ mesoporous microspheres can form via oriented attachment of α-Fe₂O₃ nanocrystals. One of the advantages of this method is that the size of α-Fe₂O₃ mesoporous microspheres can be adjusted in the range from ca. 170 to ca. 260 nm by changing the experimental parameters. High photocatalytic activities in the degradation of salicylic acid are observed for α-Fe₂O₃ mesoporous microspheres with different specific surface areas.     

Resistivity imaging of a reconfigurable phantom with circular inhomogeneities in 2D-electrical impedance tomography

Resistivity imaging of a reconfigurable phantom with circular inhomogeneities is studied with a simple instrumentation and data acquisition system for Electrical Impedance Tomography. The reconfigurable phantom is developed with stainless steel electrodes and a sinusoidal current of constant amplitude is injected to the phantom boundary using opposite current injection protocol. Nylon and polypropylene cylinders with different cross sectional areas are kept inside the phantom and the boundary potential data are collected. The instrumentation and the data acquisition system with a DIP switch-based multiplexer board are used to inject a constant current of desired amplitude and frequency. Voltage data for the first eight current patterns (128 voltage data) are found to be sufficient to reconstruct the inhomogeneities and hence the acquisition time is reduced. Resistivity images are reconstructed from the boundary data for different inhomogeneity positions using EIDORS-2D. The results show that the shape and resistivity of the inhomogeneity as well as the background resistivity are successfully reconstructed from the potential data for single or double inhomogeneity phantoms. The resistivity images obtained from the single and double inhomogeneity phantom clearly indicate the inhomogeneity as the high resistive material. Contrast to noise ratio (CNR) and contrast recovery (CR) of the reconstructed images are found high for the inhomogeneities near all the electrodes arbitrarily chosen for the entire study.