Terabit optical local area networks for multiprocessing systems

The design of a scalable optical local area network formultiprocessing systems is described. Each workstation has aparallel-fiber-ribbon optical link to a centralized complementarymetal-oxide silicon (CMOS) switch core, implemented on a singlecompact printed circuit board (PCB). When the Motorola Optobusfiber technology is used, each workstation has a data bandwidth of 6.4Gbits/s to the core. A centralized switch core interconnecting 32workstations supports a 204-Gbit/s aggregate data bandwidth. Theswitch core is based on a conventional broadcast-and-selectarchitecture, implemented with parallel CMOS integrated circuits(IC's). The switch core scales well; by incorporation of theCMOS optoelectronic IC's with optical input-output, the electricalcore can be reduced to a single-chip optoelectronic IC with terabitcapacities. A prototype of an optoelectronic switch core has been fabricated and is described. The appeal of the architectureincludes its reliance on commercially available parallel-fibertechnology, its reliance on the well-developed markets of local areanetworks and networks of workstations, and its smooth scalability from the electrical to optical domains as technology matures.     

Structural Studies of DNA–Cationic Lipid Complexes Confined in Lithographically Patterned Microchannel Arrays

We have used lithographically patterned microchannel arrays with channel widths ranging from 1 to 20 m, fabricated using electron beam lithography and reactive ion etching, in structural studies of DNA–cationic lipid complexes in confinement. Various techniques have been developed for loading these DNA–membrane complexes into the microchannels or to form the complexes in situ by sequentially depositing DNA and lipid solutions into the microchannels. Optical microscopy studies indicate that such complex formation is strongly influenced by the periodic channel structure even at channel widths much larger than the persistent length of the DNA molecules. Preliminary x-ray diffraction experiments conducted at Stanford Synchrotron Radiation Laboratory (SSRL) yielded only a weak signal from the lipid bilayers in the complexes. The use of a microfocused x-ray beam produced by the newly developed Bragg–Fresnel optics at a third-generation synchrotron facility may dramatically increase the signal-to-noise ratio and allow observation of orientational as well as positional ordering of DNA molecules induced by the microchannels. Structural control of the DNA–membrane complexes has a broad range of potential applications in gene probe technology and as mesoscopic biomolecular composites.     

An economical piezoelectric phase modulator for fiber optic sensors

A homemade piezoelectric phase modulator for interfero-metric fiber optic sensors was fabricated using piezoelectric buzzers as strain elements. Six piezoelectric elements were embedded between the two halves of a bakelite cylinder split along its axis and secured tightly together again to form a cylinder. Single-mode optical fiber was then wound around the cylinder to complete the unit. Up to a frequency of 500 Hz, the phase shift produced by the modulator is linearly proportional to the amplitude of the applied voltage. The sensitivity of the phase modulator is about 3.6 rad/V and has a dynamic range of 1,000 rad, which is sufficient for most phase modulation purposes.     

Organizational impact of system quality,information quality,and service quality

Increased organizational dependence on information systems drives management attention towards improving information systems’ quality. A recent survey shows that “Improve IT quality” is one of the top concerns facing IT executives. As IT quality is a multidimensional measure, it is important to determine what aspects of IT quality are critical to organizations to help Chief Information Officers (CIOs) to devise effective IT quality improvement strategies. In this research, we model the relationship between information systems’ (IS) quality and organizational impact. We hypothesize greater organizational impact in situations in which system quality, information quality and service quality are high. We also hypothesize a positive relationship between system quality and information quality. We test our hypotheses using survey data. Our structural equation model exhibits a good fit with the observed data. Our results show that IS service quality is the most influential variable in this model (followed by information quality and system quality), thus highlighting the importance of IS service quality for organizational performance. This paper contributes theoretically to IS success models through the system quality-to-information quality and IS quality-to-organizational impact links. Implications of our results for practice and research are discussed.     

Effects of environmental temperature and humidity on thermal flying height adjustment

Thermal actuated sliders are being widely used in today’s hard disk drive industry for its advantages of easier control of flying height (FH) and less risk of contacts with the disk. This article uses a coupled-field analysis method, which includes an air bearing model, a heat transfer model and a thermal-structural finite element model to investigate the FH changes of thermal actuated sliders at various environmental conditions. The mechanism of water vapour’s contribution to air bearing pressure loss is explained and a new humidity model is proposed to calculate this pressure loss. The temperature effects are also considered in the simulation models. It is observed that the environmental temperature and humidity have significant effects on slider’s FH changes, but their effects on the thermal protrusion height are limited. A humidity sensitivity study is also made and the results are discussed. It is found that the slider with thermal protrusion on its trailing pad will be more sensitive to the humidity. Besides air bearing stiffness, some other factors such as peak pressure, protrusion shape and air bearing surface (ABS) design will also contribute to the slider’s humidity sensitivity.     

Assessment of working conditions in two different semiconductor manufacturing lines: Effective ergonomics interventions

This article examines two manufacturing lines producing semiconductors using different technology concepts, namely Conventional Line (CL) and Lean Production Line (LPL). Both lines manufacturing the same products were compared using various factors, including working conditions, task risks and dangers of the job, and physical body stress. Ergonomic approaches were adopted in the investigation of the two lines. Survey questionnaires were administered to 30% of the workers, and multiple statistical tests were used to determine crucial predictors and to investigate the interactions between the factors. This research has shown that improved ergonomics factors will lead to better working conditions and thus increased job satisfaction. The observed ergonomic differences of these two production lines are compared, and appropriate managerial remedial action is recommended. The interventions to both the lines should reduce accident rates, minimize waste of resources, improve work effectiveness, and provide a better working environment that enhances employees' morale and maximizes productivity and profits. © 2010 Wiley Periodicals, Inc.     

Case-based expert system using wavelet packet transform and kernel-based feature manipulation for engine ignition system diagnosis

Whenever there is any fault in an automotive engine ignition system or changes of an engine condition, an automotive mechanic can conventionally perform an analysis on the ignition pattern of the engine to examine symptoms, based on specific domain knowledge (domain features of an ignition pattern). In this paper, case-based reasoning (CBR) approach is presented to help solve human diagnosis problem using not only the domain features but also the extracted features of signals captured using a computer-linked automotive scope meter. CBR expert system has the advantage that it provides user with multiple possible diagnoses, instead of a single most probable diagnosis provided by traditional network-based classifiers such as multi-layer perceptions (MLP) and support vector machines (SVM). In addition, CBR overcomes the problem of incremental and decremental knowledge update as required by both MLP and SVM. Although CBR is effective, its application for high dimensional domains is inefficient because every instance in a case library must be compared during reasoning. To overcome this inefficiency, a combination of preprocessing methods, such as wavelet packet transforms (WPT), kernel principal component analysis (KPCA) and kernel K-means (KKM) is proposed. Considering the ignition signals captured by a scope meter are very similar, WPT is used for feature extraction so that the ignition signals can be compared with the extracted features. However, there exist many redundant points in the extracted features, which may degrade the diagnosis performance. Therefore, KPCA is employed to perform a dimension reduction. In addition, the number of cases in a case library can be controlled through clustering; KKM is adopted for this purpose. In this paper, several diagnosis methods are also used for comparison including MLP, SVM and CBR. Experimental results showed that CBR using WPT and KKM generated the highest accuracy and fitted better the requirements of the expert system.     

Qualitative findings of students’ perception on practice of self-regulated strategies in online community discussion

With rapid emergence to the birth of the knowledge era, an active and interactive learning environment is fundamental to any teaching and learning process. Over time, negative implications of traditional learning environment are mounting, and measures must be taken to challenge it. With extensive research on available learning tools, it has become more feasible to provide our students with better learning opportunities. Such was the anticipation in the Malaysian educational context. Hence, this paper aims to address qualitative findings of a study on self-regulated learning strategies conveyed through the proposed interactive e-learning community (iELC). In duration of eight weeks, students (n = 50) from regular national secondary schools were subjected to online learning tasks aimed to advance strategies on self-regulated learning. To date, strategies of self-regulated learning have been perceived as key to learner to succeed academically and after the schooling years. By means of semi-structured interview, data were collected from small group and one-to-one perception. Results were directed at the overall development of self-regulated learning strategies and its diffusion in the iELC discussion platform. Conclusively, these findings add significantly to the understanding of self-regulated learning strategies in an online learning environment.     

Institutional pressures and mindful IT management: The case of a container terminal in China

Although it has been only ten years in operations, Yantian International Container Terminals Limited (YICT) has evolved as a world-class container terminal and become the first Chinese port to receive the Best Global Container Port of the Year award for 2005–2006, as well as being designated China's best container terminal in terms of operational efficiency for 2008. A success factor of YICT is its extensive use of IT in managing and enhancing the productivity and services of the port operations. Premised upon Institutional Theory and the organizational mindfulness perspectives (preoccupation with failure and success, reluctance to simplify interpretations, sensitivity to operations, commitment to resilience, and reliance on expertise over formal authority) and using case study methodology, we examined the institutional pressures faced by YICT in its IT management (ITM), and determined how YICT coped with its institutional pressures during its IT development.