Alternating-direction implicit (ADI) formulation of the finite-difference time-domain (FDTD) method: algorithm and material dispersion implementation

The alternating-direction implicit finite-difference time-domain (ADI-FDTD) technique is an unconditionally stable time-domain numerical scheme, allowing the /spl Delta/t time step to be increased beyond the Courant-Friedrichs-Lewy limit. Execution time of a simulation is inversely proportional to /spl Delta/t, and as such, increasing /spl Delta/t results in a decrease of execution time. The ADI-FDTD technique greatly increases the utility of the FDTD technique for electromagnetic compatibility problems. Once the basics of the ADI-FDTD technique are presented and the differences of the relative accuracy of ADI-FDTD and standard FDTD are discussed, the problems that benefit greatly from ADI-FDTD are described. A discussion is given on the true time savings of applying the ADI-FDTD technique. The feasibility of using higher order spatial and temporal techniques with ADI-FDTD is presented. The incorporation of frequency dependent material properties (material dispersion) into ADI-FDTD is also presented. The material dispersion scheme is implemented into a one-dimensional and three-dimensional problem space. The scheme is shown to be both accurate and unconditionally stable.     

Intergranular corrosion of a light aircraft aluminum alloy propeller

Examination of the wreckage of a light aircraft revealed that approximately 20 cm was missing from one tip of the aluminum alloy propeller. Fractographic and metallographic examination of the remaining portion of the propeller revealed extensive grain-boundary separation in the vicinity of the fracture, and grain edges and corners rounded by corrosion on the fracture surface. Energy dispersive X-ray analysis (EDXA) revealed fluorine on, and in the vicinity of, the fracture surface. In the ensuing litigation, it was asserted that the crash occurred because the propeller fractured in flight as the result of intergranular attack caused by the use of a fluorine-bearing cleaner.     

Atomic layer chemical vapour deposition of copper

Copper films with (1 1 1) texture are of crucial importance in integrated circuit interconnects. We have deposited strongly (1 1 1)-textured thin films of copper by atomic layer deposition (ALD) using [2,2,6,6-tetramethyl-3,5-heptadionato] Cu(II), Cu(thd)₂, as the precursor. The dependence of the microstructure of the films on ALD conditions, such as the number of ALD cycles and the deposition temperature was studied by X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy. Analysis of (1 1 1)-textured films shows the presence of twin planes in the copper grains throughout the films. SEM shows a labyrinthine structure of highly connected, large grains developing as film thickness increases. This leads to low resistivity and suggests high resistance to electromigration.     

Time-resolved spectroscopy of infrared active vibrations in 2,5-dioctyloxy poly(phenylene vinylene) films

We report on picosecond time resolved spectroscopy of photogenerated infrared active vibrations in thin films of 2,5-dioctyloxy poly(phenylene vinylene). We excited the films by ?4 ps long pulses of 565 nm laser light with 2×10¹³ photons/cm² per pulse and repetition rate of 76 MHz. We then followed the temporal evolution of the infrared active vibrational (IRAV) spectrum using a subsequent, variably delayed, weak tunable IR probe pulses of similar temporal duration. Under these conditions, we show clear spectroscopic evidence for photogenerated infrared active vibrations at times which are shorter than our temporal resolution (<4 ps). We suggest that the transient IRAV absorption is due to secondary polarons formation following exciton dissociation.     

Malted weaning food made from maize,soybean, groundnut and cooking banana

Infant malnutrition and mortality are common in Africa, although Africa is endowed with agricultural produce that could be harnessed through processing to produce adequate infant food. This project was set up to explore the possibility of using local raw materials to develop a nutritious, low‐dietary‐bulk, cheap infant food. The materials used included cereal (maize), pulses (soybean and groundnut) and tuberiferous plants (cooking banana). The grains were first germinated and dried or kilned before milling and formulation. The malted products were compared with fermented ones in terms of nutritional, dietary bulk and acceptability criteria. Malting increased the nutrient content, reduced the dietary bulk and enhanced the taste of the infant food. In terms of protein content, least gelation concentration and overall acceptability, malted samples had values in the range of 138–151 mg g^?1, 150–175 g l^?1 and 7.2–8.82 respectively, while the control (fermented) sample had values of 54 mg g^?1, 100 g l^?1 and 6.29 respectively. Roasting of malted cereals above 55 °C reduced the bulk reduction ability but enhanced the taste of the products. A combination of malted maize and soybean, roasted groundnut and cooking banana in the ratio of 50:15:15:20 gave a very recommendable weaning food for infants between the ages of 6 months and 2 years. © 2002 Society of Chemical Industry     

Effects of introduced aspartic and glutamic acid residues on the P'1 substrate specificity, pH dependence and stability of carboxypeptidase Y

Carboxypeptidase Y is a serine carboxypeptidase isolated from Saccharomyces cerevisiae with a preference for C-terminal hydrophobic amino acid residues. In order to alter the inherent substrate specificity of CPD-Y into one for basic amino acid residues in P'1, we have introduced Asp and/or Glu residues at a number of selected positions within the S'1 binding site. The effects of these substitutions on the substrate specificity, pH dependence and protein stability have been evaluated. The results presented here demonstrate that it is possible to obtain significant changes in the substrate preference by introducing charged amino acids into the framework provided by an enzyme with a quite different specificity. The introduced acidic amino acid residues provide a marked pH dependence of the (kcat/Km)FA-A-R-OH/(kcat/Km)FA-A-L-OH ratio. The change in stability upon introduction of Asp/Glu residues can be correlated to the difference in the mean buried surface area between the substituted and the substituting amino acid. Thus, the effects of acidic amino acid residues on the protein stability depend upon whether the introduced amino acid protrudes from the solvent accessible surface as defined by the surrounding residues in the wild type enzyme or is submerged below.     

Supermodularity and subadditivity properties of the entropy on themajorization lattice

We prove that the entropy is a supermodular and subadditive function on the lattice of all n-dimensional probability distributions, ordered according to the partial order relation defined by majorization among vectors     

GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance