Rheological and morphological properties of high‐density polyethylene and poly(ethylene–octene) blends

The rheological and morphological properties of blends based on high‐density polyethylene (HDPE) and a commercial ethylene–octene copolymer (EOC) produced by metallocene technology were investigated. The rheological properties were evaluated in steady and dynamic shear experiments at 190°C in shear rates ranging from 90 s^?1 to 1500 s^?1 and frequency range between 10^?1 rad/s and 10² rad/s, respectively. These blends presented a high level of homogeneity in the molten state and rheological behavior was generally intermediate to those of the pure components. Scanning electron microscopy (SEM) showed that the blends exhibit dispersed morphologies with EOC domains distributed homogeneously and with particle size inferior to 2 μm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2240–2246, 2002     

The Influence of the Acid Sites on the Methylamines Synthesis with Cu-HZSM-5 Zeolite

There is a high industrial demand for MMA and DMA, however, the production of TMA is favored with the commercial catalysts. This work tested the methanol amination reaction with HZSM-5 and Cu/HZSM-5 zeolites (%Cu = 1.2, 3.7 and 6.0). Regarding the MMA selectivity, light differences were observed among Cu/HZSM-5 catalysts and pure zeolite, although the catalysts containing 3.7% copper was slightly more selective to MMA than the other metallic catalysts studied. From these results it is suggested that the metal loading present in the catalysts leads to a modification in the nature of the acidic sites, in particular, the selectivity depends on ratio Brönsted/Lewis acid sites. This modifications would facilitate the amines desorption during the reaction.     

The metabolism of 1-acyl-PAF in rabbit platelets and its possible interaction with PAF

The metabolism of 1-acyl-2-acetyl-sn-glycero-3-phosphocholine (1-acyl-PAF), a naturally occurring analogue of platelet activating factor (PAF), was investigated in rabbit platelets. Our studies showed that 1-acyl-[³H]PAF (1-palmitoyl-2-acetyl-sn-glycero-3-phospho[N-methyl-³H]-choline) was converted by platelets into phosphatidyl-[³H]choline ([³H]PC) in a time-dependent fashion. The formation of [³H]PC occurred at a rate similar to that observed when lyso-[³H]PC (palmitoyl-sn-glycero-3-phospho[N-methyl-³H]choline) was used as substrate. In addition, a time-dependent increase in the level of water-soluble radioactivity was observed during the incubation of platelets with either 1-acyl-[³H]PAF or lyso-[³H]PC. This increase was parallel to the formation of [³H]PC and was not observed in the presence of [¹⁴C]PAF (1-octadecyl-2-acetyl-sn-glycerol-3-phospho[N methyl-¹⁴C]choline). Analysis by thin-layer chromatography showed that the soluble radioactivity was mainly associated with glycerophosphocholine (GPC). On the other hand, the preincubation of platelets with phenylmethylsulfonyl fluoride, an inhibitor of the acetylhydrolase, reduced the hydrolysis of 1-acyl-[³H]PAF to [³H]GPC with a concomitant accumulation of radioactivity in 1-acyl-PAF. These findings suggest that 1-acyl-PAF is converted into PC through deacetylation-reacylation with lysoPC as an obligatory intermediate. The findings also indicate that the lysoPC resulting from 1-acyl-PAF is either reacylated to phosphatidylcholine (PC) or hydrolyzed to GPC by lysophospholipase. Finally, we showed that the stimulation of platelets with PAF led to a time- and concentration-dependent increase in the conversion of 1-acyl-[³H]PAF to [³H]PC. The stimulatory effect of PAF was not observed when platelets were lysed before incubation, suggesting that PAF enhances the metabolism of 1-acyl-PAF, probably by accelerating its translocation through the plasma membrane.     

Two new aluminophosphates, IST-1 and IST-2: First examples of a dual templating role of water and methylamine in generating microporous structures

This study is aimed at exploring the ability of very small sized N-bearing molecules to generate and stabilize microporous aluminophosphates. Two new AlPO₄-n materials, called IST-1 and IST-2, have been obtained in aqueous media using, as main template, methylamine (MA), directly added, or generated in situ from methylformamide (MF) degradation. While IST-1 topology proved to be novel, IST-2 appears structurally related to AlPO₄-53(A). The obtained materials were characterized by powder XRD, TG/DSC, SEM and solid-state NMR. Tetraalkylammonium (TEA) cations were used as potential co-templates but only MA and water were found incorporated in the pore volumes of both structures, which argues for their true templating role. In IST-1, ¹³C solid-state NMR studies showed that half of MA species, presumably protonated, is H-bonded to framework oxygens while the other half surprisingly bonds directly to framework Al atoms. ¹³C NMR showed that only protonated MA occurs in IST-2 channels. TEA⁺ cations definitely do not play any specific template role. They indirectly favor the crystallization of IST-1 or IST-2 devoid from other crystalline or amorphous side phases, by interacting with part of the Al and P in solution and forming soluble [AlPO₄(OH)]–[TEA,HMA] complexes, substantially modifying the compositions of gels precursors to each phase during nucleation and/or growth steps. While both IST-1 and IST-2 crystallize from gels of similar initial compositions, it was demonstrated that the new MA/T ratio (T = Al or P) obtained after in situ complexation was the key parameter that specifically governs the crystallization of each phase.     

Twin-image suppression in digital in-line holography based on wave-front filtering

Pattern Analysis and Applications - Digital holography is an imaging process able to recreate three-dimensional representations of objects from recording pattern interference among distinct waves....     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...     

Computational Decision Support System for ADHD Identification

Machine Intelligence Research - Attention deficit/hyperactivity disorder (ADHD) is a common disorder among children. ADHD often prevails into adulthood, unless proper treatments are facilitated to...     

Sense representations for Portuguese: experiments with sense embeddings and deep neural language models

Sense representations have gone beyond word representations like Word2Vec, GloVe and FastText and achieved innovative performance on a wide range of natural language processing tasks. Although very useful in many applications, the traditional approaches for generating word embeddings have a strict drawback: they produce a single vector representation for a given word ignoring the fact that ambiguous words can assume different meanings. In this paper, we explore unsupervised sense representations which, different from traditional word embeddings, are able to induce different senses of a word by analyzing its contextual semantics in a text. The unsupervised sense representations investigated in this paper are: sense embeddings and deep neural language models. We present the first experiments carried out for generating sense embeddings for Portuguese. Our experiments show that the sense embedding model (Sense2vec) outperformed traditional word embeddings in syntactic and semantic analogies task, proving that the language resource generated here can improve the performance of NLP tasks in Portuguese. We also evaluated the performance of pre-trained deep neural language models (ELMo and BERT) in two transfer learning approaches: feature based and fine-tuning, in the semantic textual similarity task. Our experiments indicate that the fine tuned Multilingual and Portuguese BERT language models were able to achieve better accuracy than the ELMo model and baselines.

     

An International Collaborative Study on Trypsin Inhibitor Assay for Legumes,Cereals, and Related Products

For determining trypsin inhibitor activity (TIA) in soy products, the American Oil Chemists' Society (AOCS) Method Ba 12-75 has been used. It measures differences in absorbance at 410 nm of bovine trypsin activity toward a synthetic substrate (Nα-benzoyl-DL-arginine-p-nitroanilide) in the absence and presence of an inhibitor. Recently, a significantly improved method was developed (JAOCS, 2019, 96:635–645), featuring 5 mL of total assay volume, enzyme-last sequence, and single inhibitor level in duplicate. It is proposed as the AOCS Method Ba 12a-2020. As a part of the AOCS method approval process, a collaborative study involving 12 international laboratories was conducted to evaluate the performance of the proposed method. The study involved measuring TIA in 10 selected test samples plus a blind duplicate. They included soybeans, pulses, cereals, and their processed products (flours, concentrates, and isolates). After rigorous statistical treatment of the data, only three outliers were removed from the data of two samples. Repeatability relative standard deviations (RSDr) for the 11 samples ranged from 0.99% to 5.52%. Reproducibility RSD (RSD_R) ranged from 7.07% to 22.92%, with seven samples having RSD_R around 10% or less. The remaining four samples had very low TIA, and their RSD_R values ranged from 13.34% to 22.92%. The study has demonstrated reliable performance of the proposed AOCS method. Several collaborators carried out additional experiments addressing some aspects of the method, leading to further refinements. The proposed method is undergoing evaluation by the AOCS Uniform Methods Committee for adoption as an Official Method for measuring TIA in various legume and grain products.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.