Erosion—corrosion characteristics of a 2.25 Cr-1 Mo steel exposed at low particle velocities

The erosion-corrosion characteristics of a 2.25 Cr-1 Mo steel at low particle velocities and elevated temperatures were determined using a nozzle type laboratory erosion tester. The tests were performed with 180–360 μm angular alumina particles at 60° angle of impingement at low particle velocities of 2.6–8.2 m/s and in the temperature interval 20–600°C. The steel was tested both in the as-received condition as well as in two preoxidized conditions. The erosion-corrosion rate of the steel, both in the as-received and in the preoxidized conditions, was found to increase with increasing particle velocity. In contrast, the wastage rates were relatively independent of temperature in the temperature range investigated, the only exception being specimens exposed to the lowest particle velocity (2.6 m/s) at the very highest temperature, i.e. 600°C, which displayed a drastic increase in wastage. Specimens preoxidized at 700°C exhibited a somewhat higher erosion rate compared with non-preoxidized specimens and specimens preoxidized at 500°C. Microscopy revealed four different major wastage mechanisms, i.e. (i) plastic deformation, cracking and micro chipping of surface material of a size corresponding to the area impinged by eroding particles, (ii) chipping of somewhat larger oxide fragments (up to 10–15 μm in diameter), (iii) chipping or spalling of relatively large oxide fragments (up to 30–50 μm in diameter), and (iv) spalling along the steel-oxide interface or within an oxide layer due to cohesive failure, of larger (up to 500 μm in diameter) oxide layer fragments. In the present study extensive spalling was only observed for non-preoxidized specimens exposed to the lowest particle velocity (2.6 m/s) and the two highest specimen temperatures (550°C and 600°C).     

适用于光学显微镜的细胞培养芯片

虽然细胞分子生物学近年来发展很快,但是细胞培养的方法变化很慢.将近一个世纪以前发明的有盖培养皿至今仍在常规使用,但它已经不适合许多用来观察和分析活体细胞内发生的变化的现代光学分析方法.这篇文章描述了一种细胞培养芯片装置,它能有效地用于细胞培养和随后的高端光学分析,比如荧光和共焦显微镜方法.     

The Value of Whole-Genome Sequencing for Mitochondrial DNA Population Studies: Strategies and Criteria for Extracting High-Quality Mitogenome Haplotypes

Whole-genome sequencing (WGS) data present a readily available resource for mitochondrial genome (mitogenome) haplotypes that can be utilized for genetics research including population studies. However, the reconstruction of the mitogenome is complicated by nuclear mitochondrial DNA (mtDNA) segments (NUMTs) that co-align with the mtDNA sequences and mimic authentic heteroplasmy. Two minimum variant detection thresholds, 5% and 10%, were assessed for the ability to produce authentic mitogenome haplotypes from a previously generated WGS dataset. Variants associated with NUMTs were detected in the mtDNA alignments for 91 of 917 (~8%) Swedish samples when the 5% frequency threshold was applied. The 413 observed NUMT variants were predominantly detected in two regions (nps 12,612–13,105 and 16,390–16,527), which were consistent with previously documented NUMTs. The number of NUMT variants was reduced by ~97% (400) using a 10% frequency threshold. Furthermore, the 5% frequency data were inconsistent with a platinum-quality mitogenome dataset with respect to observed heteroplasmy. These analyses illustrate that a 10% variant detection threshold may be necessary to ensure the generation of reliable mitogenome haplotypes from WGS data resources.     

Injection à très haute pression

Un jet à très haute pression d'eau et d'air en même temps qu'une injection de pâte de ciment est en train de ?révolutionner? la pratique des injections dans le sol et consolidation des fondations. Cette technique développée en Suède est brièvement exposée ici. L'article s'appuie sur une note résumée publiée par le Conseil suédois pour la recherche sur la construction.     

All-solid-state tunable continuous-wave ultraviolet source with high spectral purity and frequency stability

We present a novel approach for the generation of higly frequency-stable, widely tunable, single-frequency cw UV light that is suitable for high-resolution spectroscopy. Sum-frequency generation (SFG) of two solid-state sources with a single cavity resonant for both fundamental waves is employed. Using a highly stable, narrow-linewidth frequency-doubled cw Nd:YAG laser as a master laser and slaving to it the SFG cavity and the other fundamental wave from a Ti:sapphire laser, we generate UV radiation of 33-mW output power around 313 nm. Alternatively, we use a diode laser instead of the Ti:sapphire laser and produce an output power of 2.1 mW at 313 nm. With both setups we obtain a continuous tunability of >15 GHz, short-term frequency fluctuations in the submegahertz range, a long-term frequency drift below 100 MHz/h, and stable operation for several hours. The theory of optimized doubly resonant SFG is also given.     

An enhancement to the IEEE 802.11e EDCA providing QoS guarantees

One of the challenges that must be overcome to realize the practical benefits of ad hoc networks is quality of service (QoS). However, the IEEE 802.11 standard, which undeniably is the most widespread wireless technology of choice for WLANs and ad hoc networks, does not address this issue. In order to support applications with QoS requirements, the upcoming IEEE 802.11e standard enhances the original IEEE 802.11 MAC protocol by introducing a new coordination function which has both contention-based and contention-free medium access methods. In this paper, we consider the contention-based medium access method, the EDCA, and propose an extension to it such that it can be used to provide QoS guarantees in WLANs operating in ad hoc mode. Our solution is fully distributed, uses admission control to regulate the usage of resources and gives stations with high-priority traffic streams an opportunity to reserve time for collision-free access to the medium.