Temperature of post‐flashover compartment fires—Calculations and validation

This paper describes and validates by comparisons with tests a one‐zone model for computing temperature of fully developed compartment fires. Like other similar models, the model is based on an analysis of the energy and mass balance assuming combustion being limited by the availability of oxygen, ie, a ventilation‐controlled compartment fire. However, the mathematical solution techniques in this model have been altered. To this end, a maximum fire temperature has been defined depending on combustion efficiency and opening heights only. This temperature together with well‐defined fire compartment parameters was then used as a fictitious thermal boundary condition of the surrounding structure. The temperature of that structure could then be calculated with various numerical and analytical methods as a matter of choice, and the fire temperature could be identified as a weighted average between the maximum fire temperature and the calculated surface temperature of the surrounding structure as a function of time. It is demonstrated that the model can be used to predict fire temperatures in compartments with boundaries of semi‐infinitely thick structures as well as with boundaries of insulated and noninsulated steel sheets where the entire heat capacity of the surrounding structure is assumed to be concentrated to the steel core. With these assumptions, fire temperatures could be calculated with spreadsheet calculation methods. For more advanced problems, a general finite element solid temperature calculation code was used to calculate the temperature in the boundary structure. With this code, it is possible to analyze surrounding structures of various kinds, for example, structures comprising several materials with properties varying with temperature as well as voids. The validation experiments were accurately defined and surveyed. In all the tests, a propane diffusion burner was used as the only fire source. Temperatures were measured with thermocouples and plate thermometers at several positions.     

Probabilistic movement models and zones of control

Machine Learning - Coordinated movements of players are key to success in team sports. However, traditional models for player movements are based on unrealistic assumptions and their analysis is...     

On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.     

Robocasting of dense yttria-stabilized zirconia structures

Advanced ceramic materials with complex design have become inseparable from the current engineering applications. Due to the limitation of traditional ceramic processing, ceramic additive manufacturing (AM) which allows high degree of fabrication freedom has gained significant research interest. Among these AM techniques, low-cost robocasting technique is often considered to fabricate complex ceramic components. In this work, aqueous ceramic suspension comprising of commercial nano-sized yttria-stabilized zirconia (YSZ) powder has been developed for robocasting purpose. Both fully and partially stabilized YSZ green bodies with complex morphologies were successfully printed in ambient conditions using relatively low-solid-content ceramic suspensions (<38 vol%). The sintered structures were able to retain the original morphologies with >94% of the theoretical density despite its high linear shrinkage (up to 33%). The microstructure analysis indicated that dense fully and partially stabilized YSZ with grain size as small as 1.40 ± 0.53 and 0.38 ± 0.10 μm can be obtained, respectively. The sintered partially stabilized YSZ solid and porous mesh samples (porosity of macro-pores >45%) exhibited hardness up to 13.29 GPa and flexural strengths up to 242.8 ± 11.4 and 57.3 ± 5.2 MPa, respectively. The aqueous-based ceramic suspension was also demonstrated to be suitable for the fabrication of large YSZ parts with good repeatability.     

Beyond Solid Solution High-Entropy Alloys: Tailoring Magnetic Properties via Spinodal Decomposition

Since its first emergence in 2004, the high-entropy alloy (HEA) concept has aimed at stabilizing single- or dual-phase multi-element solid solutions through high mixing entropy. Here, this strategy is changed and renders such massive solid solutions metastable, to trigger spinodal decomposition for improving the alloys’ magnetic properties. The motivation for starting from a HEA for this approach is to provide the chemical degrees of freedom required to tailor spinodal behavior using multiple components. The key idea is to form Fe-Co enriched regions which have an expanded volume (relative to unconstrained Fe-Co), due to coherency constraints imposed by the surrounding HEA matrix. As demonstrated by theory and experiments, this leads to improved magnetic properties of the decomposed alloy relative to the original solid solution matrix. In a prototype magnetic FeCoNiMnCu HEA, it is shown that the modulated structures, achieved by spinodal decomposition, lead to an increase of the Curie temperature by 48% and a simultaneous increase of magnetization by 70% at ambient temperature as compared to the homogenized single-phase reference alloy. The findings thus open a pathway for the development of advanced functional HEAs.     

Locked nucleic acids and intercalating nucleic acids in the design of easily denaturing nucleic acids: thermal stability studies

Intercalating nucleic acids (INA(R)s) with insertions of (R)-1-O-(1-pyrenylmethyl)glycerol were hybridized with locked nucleic acids (LNAs). INA/LNA duplexes were found to be less stable than the corresponding DNA/LNA duplexes when the INA monomer was inserted as a bulge close to the LNA monomers in the opposite strand. This property was used to make "quenched" complements that possess LNA in hairpins and in duplexes and are consequently more accessible for targeting native DNA. The duplex between a fully modified 13-mer LNA sequence and a complementary INA with six pyrene residues inserted after every second base as a bulge was found to be very unstable (Tm=30.1 degrees C) in comparison with the unmodified double-stranded DNA (Tm=48.7 degrees C) and the corresponding duplexes of LNA/DNA (Tm=81.6 degrees C) and INA/DNA (Tm=66.4 degrees C). A thermal melting experiment of a mixture of an LNA hairpin, with five LNA nucleotides in the stem, and its complementary DNA sequence gave a transition with an extremely low increase in optical density (hyperchromicity). When two INA monomers were inserted into the stem of the LNA hairpin, the same experiment resulted in a significant hyperchromicity comparable with the one obtained for the corresponding DNA/DNA duplex.     

Native Chemical Ligation Directed by Photocleavable Peptide Nucleic Acid (PNA) Templates

A novel peptide–peptide ligation strategy is introduced that has the potential to provide peptide libraries of linearly or branched coupled fragments and will be suited to introduce simultaneous protein modifications at different ligation sites. Ligation is assisted by templating peptide nucleic acid (PNA) strands, and therefore, ligation specificity is solely encoded by the PNA sequence. PNA templating, in general, allows for various kinds of covalent ligation reactions. As a proof of principle, a native chemical ligation strategy was elaborated. This PNA‐templated ligation includes easy on‐resin procedures to couple linkers and PNA to the respective peptides, and a traceless photocleavage of the linker/PNA oligomer after the ligation step. A 4,5‐dimethoxy‐2‐nitrobenzaldehyde‐based linker that allowed the photocleavable linkage of two bio‐oligomers was developed.