Schiff base-assisted surface patterning of polylactide–zinc oxide films: generation,characterization and biocompatibility evaluation

A novel route for obtaining ordered microporous polylactide films has been explored using zinc oxide and a Schiff base. The SEM images reveal that the water vapor condensation near the surface of a polylactide solution containing a synthesized Schiff base and zinc oxide results in well-dispersed water droplets, which upon subsequent evaporation can assist breath figure patterning. The generation of ordered micropores at the film surface is attributed to the interaction between the surface +ve charge of well-dispersed zinc oxide particles and the δ-bearing water droplets from moisture. The potential for biocompatible applications has been revealed for the membranes by the cell viability assay against mice fibroblast (L929) cells and the hemocompatibility assay. The findings suggest an efficient route for the development of porous biodegradable polylactide membranes for various applications, typically for wound dressing.     

Optical encryption system that uses phase conjugation in a photorefractive crystal

We implement an optical encryption system based on double-random phase encoding of the data at the input and the Fourier planes. In our method we decrypt the image by generating a conjugate of the encrypted image through phase conjugation in a photorefractive crystal. The use of phase conjugation results in near-diffraction-limited imaging. Also, the key that is used during encryption can also be used for decrypting the data, thereby alleviating the need for using a conjugate of the key. The effect of a finite space-bandwidth product of the random phase mask on the encryption system's performance is discussed. A theoretical analysis is given of the sensitivity of the system to misalignment errors of a Fourier plane random phase mask.     

Toward objective evaluation of image segmentation algorithms

Unsupervised image segmentation is an important component in many image understanding algorithms and practical vision systems. However, evaluation of segmentation algorithms thus far has been largely subjective, leaving a system designer to judge the effectiveness of a technique based only on intuition and results in the form of a few example segmented images. This is largely due to image segmentation being an ill-defined problem-there is no unique ground-truth segmentation of an image against which the output of an algorithm may be compared. This paper demonstrates how a recently proposed measure of similarity, the normalized probabilistic rand (NPR) index, can be used to perform a quantitative comparison between image segmentation algorithms using a hand-labeled set of ground-truth segmentations. We show that the measure allows principled comparisons between segmentations created by different algorithms, as well as segmentations on different images. We outline a procedure for algorithm evaluation through an example evaluation of some familiar algorithms - the mean-shift-based algorithm, an efficient graph-based segmentation algorithm, a hybrid algorithm that combines the strengths of both methods, and expectation maximization. Results are presented on the 300 images in the publicly available Berkeley segmentation data set     

Hindered settling in non-newtonian power law liquids

New experimental results on the hindered settling of model glass bead suspensions in non-Newtonian suspending media are reported. The data presented encompass the following ranges of variables: 7.38 × 10^?4 ≤ Re_1∞ ≤ 2; 0.0083 ≤ d/D ≤ 0.0703; 0.13 ≤ C ≤ 0.43 and 1 ≥ n ≥ 0.8. In these ranges of conditions, the dependence of the hindered settling velocity on concentration is adequately represented by the corresponding Newtonian expressions available in the literature. The influence of the power law flow behaviour index is completely embodied in the modified definition of the Reynolds number used for power law liquids.     

Mechanical and aging properties of cross‐linked ethylene propylene diene rubber / styrene butadiene rubber blends

The mechanical properties and aging characteristics of blends of ethylene propylene diene monomer (EPDM) rubber and styrene butadiene rubber (SBR) were investigated with special reference to the effect of blend ratio and cross‐linking systems. Among the blends, the one with 80/20 EPDM/SBR has been found to exhibit the highest tensile, tear, and abrasion properties at ambient temperature. The observed changes in the mechanical properties of the blends have been correlated with the phase morphology, as attested by scanning electron micrographs (SEMs). The effects of three different cure systems, namely, sulfur (S), dicumyl peroxide (DCP), and a mixed system consisting of sulfur and peroxide (mixed) on the blend properties also were studied. The stress‐strain behavior, tensile strength, elongation at break, and tear strength of the blends were found to be better for the mixed system. The influence of fillers such as high‐abrasion furnace (HAF) black, general‐purpose furnace (GPF) black, silica, and clay on the mechanical properties of 90/10 EPDM/SBR blend was examined. The ozone and water aging studies also were conducted on the sulfur cured blends, to supplement the results from the mechanical properties investigation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2606–2621, 2004     

Cure characteristics,morphology, mechanical properties,and aging characteristics of silicone rubber/ethylene vinyl acetate blends

Silicone rubber/ethylene vinyl acetate (SR/EVA) rubber mixes with different ratios were prepared by using dicumyl peroxide (DCP) and benzoyl peroxide (BP) as curing agents. The vulcanization characteristics such as cure kinetics, activation energy, and cure rate of the blends were analyzed. The effects of blend ratio and curing agents on the mechanical properties such as stress–strain behavior, tensile strength, elongation at break, tear strength, relative volume loss, hardness, flex crack resistance, and density of the cured blends have been investigated. Almost all the mechanical properties have been found to be increased with increase in EVA content in the blends particularly in DCP‐cured systems. The increment in mechanical properties of the blends with higher EVA content has been explained in terms of the morphology of the blends, attested by scanning electron micrographs. Attempts have been made to compare the experimental results, from the evaluation of mechanical properties, with relevant theoretical models. The aging characteristics of the cured blends were also investigated and found that both the DCP‐ and BP‐cured blends have excellent water and thermal resistance. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1069–1082, 2006     

Molecular transport of aliphatic hydrocarbons through styrene butadiene rubber/ethylene vinyl acetate blends

Polymer blends based on styrene butadiene rubber and ethylene vinyl acetate (EVA) were prepared. The sorption and diffusion of four aliphatic hydrocarbons through the blends were investigated with temperatures of 26–56°C. Sulfur, dicumyl peroxide (DCP), and a mixed system consisting of sulfur and DCP (mixed) were used as crosslinking agents for the blends. Of the three systems, the peroxide vulcanized blends were found to exhibit the lowest penetrant uptake. The aliphatic liquid penetration through the matrix decreased with an increase in the EVA content in the blends, which was attributed to the semicrystalline nature of the EVA matrix. The experimental observations were correlated with the morphology of the blends. Diffusion and permeation coefficients were calculated from the sorption data. A slight deviation from the Fickian trend was observed for the mechanism of transport with an increase in the EVA content in the blends. The molecular mass between crosslinks and thermodynamic parameters of sorption were determined from swelling data. The experimental observations were compared with different theoretical models. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2884–2897, 2006     

Computational study on the influence of number of threads on the performance of single screw pump at high angular velocities

Fluid flow in a screw pump which rotates at very high angular velocity is numerically analyzed. In the present study, fluid flow in screw pumps under high Reynolds number, of the order of 10⁵, is considered. Screw pump has two major elements, a plain shroud which is a stationary element and a rotating hub with helical grooves contained within the shroud. In this paper, three variants of hubs with different number of thread starts numbering six, eight and twelve in combination with a plain shroud is studied. Each of the three possible combinations are analyzed on the basis of pressure rise developed, efficiency and shaft power. It was seen that pressure rise, efficiency and shaft power increases as the number of threads increases in the range of mass flow rates studied.     

Metrology and the linear canonical transform

It is shown experimentally that both surface tilt and in-plane translation motion can be independently estimated using the speckle photographic correlation technique by capturing consecutive images in two linear canonical transform domains (using two different quadratic phase systems). A geometric interpretation, based on use of the Wigner distribution function is presented to describe the method and a simple matrix approach, based on the ABCD matrix, is used to quantify it. It is shown that the sensitivity and dynamic range of measurement of both tilt and translation are both variable and depend on the parameters of the ABCD matrix.     

A tunable waveguide to cavity coupler for high power accelerator cavities

The end iris ridge waveguide couplers are used to couple power to accelerator cavities through a reduced size coupling port. However, higher electric and magnetic fields due to reduced size lead to strict requirements on dimensional tolerances during coupler fabrication process. It is shown by detailed parametric analysis that even small dimensional changes during manufacturing or operation can lead to undesired shift in design frequency and deterioration of return loss. Hence, transmitted power testing of two couplers connected back to back without an intermediate cavity cannot be carried out. Here, we propose cylindrical static tuners on impedance matching section to relax the dimensional tolerance requirements. It is also shown that an iris coupled coupler-cavity system is more tolerant towards coupler dimensional changes than a stand-alone coupler. However, same tuners can find use for tuning the coupling coefficient of coupler-cavity system. The proposed tuning scheme is expected to reduce the coupler manufacturing costs and provide an useful alternative for coupling coefficient tuning over iris machining.