Autonomous bioremediation of a microbial protein (bioremediase) in Pozzolana cementitious composite

The self-bioremediation in cementitious composite material is one of the most interesting avenues relating to damage management and self-life of constructions, which needs to be cogitated. The self-bioremediation of a microbial protein-impregnated cementitious material has been explored in this work. The bioremediase protein was isolated from a hot spring bacterium (BKH1) and incorporated at three different concentrations into commercial Pozzolana cements that are widely used for mortar sample preparation. Artificial cracks were generated within the mortar samples by applying partial breaking load (50 %) and the samples were cured under water for different days. Image analysis by Crackscope and microstructure analysis by field emission scanning electron microscope ascertained the formation of irregular crystalline healing material within the cracks of the test samples. X-ray diffractometer and energy dispersive spectra analyses confirmed that the irregular crystalline structures were due to the deposition of new silicate phase (Gehlenite) within the cracks. Increase of ultrasonic pulse velocity and compressive strength, augmentation of sulphate resistance, decrease of chloride permeability and water absorption capacity revealed that there were overall improvement of mechanical properties and durability of the protein-incorporated mortar samples compared to the control (without protein incorporation) mortar samples. This cost effective and eco-friendly self-bioremediation phenomenon observed in mortar is evolved due to the biosilicification activity of bioremediase protein when amended in mortar samples. The exceptional potential of the microbial bioremediase protein for self-bioremediation attribute may add a new dimension in self-healing construction technology in near future.     

Integration of GIS and multicriteria decision analysis for urban aquaculture development in Bangladesh

Site selection is a key factor in any aquaculture operation, affecting both success and sustainability as well as solving land or water use conflicts. This study was conducted to identify suitable sites for carp farming development in urban water bodies (UWBs) of Chittagong, Bangladesh using Geographical Information Systems (GIS) based MultiCriteria Evaluation (MCE) of water, soil and infrastructure database. ASTER imagery and 14 thematic layers were analyzed with ENVI and GIS capabilities, and developed a series of GIS models to identify and prioritize the appropriate UWBs for carp farming. The study identified 487 UWBs occupying 362 ha and revealed 280 ha (77%) is the most suitable, 36 ha (10%) is moderately suitable and 46 ha (13%) is not suitable which was consistent with field verification. The results are encouraging for extension of carp culture and diversify the economic activities of the urban dwellers.     

Design and simulation of a novel GaN based resonant tunneling high electron mobility transistor on a silicon substrate

For the first time, we have introduced a novel GaN based resonant tunneling high electron mobility transistor (RTHEMT) on a silicon substrate. A monolithically integrated GaN based inverted high electron mobility transistor (HEMT) and a resonant tunneling diode (RTD) are designed and simulated using the ATLAS simulator and MATLAB in this study. The 10% Al composition in the barrier layer of the GaN based RTD structure provides a peak-to-valley current ratio of 2.66 which controls the GaN based HEMT performance. Thus the results indicate an improvement in the current-voltage characteristics of the RTHEMT by controlling the gate voltage in this structure. The introduction of silicon as a substrate is a unique step taken by us for this type of RTHEMT structure.     

Slip in flows of power-law liquids past smooth spherical particles

The effect of slip in flows of power-law liquids past smooth spherical particles is numerically studied by using Navier’s linear slip model. For computational simplicity, a sphere-in-sphere type computational domain has been chosen. Thus, the governing conservation equations of mass and momentum are considered in spherical coordinates. These are solved by using a finite difference method-based simplified marker and cell algorithm implemented on a staggered grid arrangement. The non-Newtonian terms of the momentum equation are discretized by a second-order central differencing scheme, whereas the convective terms are discretized by using QUICK scheme. The reliability and accuracy of the solver is established by comparing the present numerical results with the existing literature counterparts. Furthermore, extensive new results are obtained in the range of conditions for Reynolds number, Re: 0.1–200; power-law behavior index, n: 0.5–1.6; and a dimensionless slip parameter, λ: 0.01–100. Finally, effects of these dimensionless parameters on near surface flow kinematics are thoroughly delineated.     

Impact of source waters,disinfectants, seasons and treatment approaches on trihalomethanes in drinking water: a comparison based on the size of municipal systems

This study compares concentrations of trihalomethanes (THMs) in municipal water for 2001–2007 from the small and large systems in two provinces in Canada (Newfoundland and Quebec) based on source waters, disinfectants, seasons and treatment approaches. Approximately 71 and 94%, respectively, of the municipal systems in Quebec and Newfoundland are small systems (serving fewer than 3000 people). The small systems serve approximately 8.6% (0.57 million) and 44.1% (0.18 million) of the populations in Quebec and Newfoundland, respectively. Concentrations of THMs and its variability are much higher in the small systems (Quebec: 0–941 μg/L; Newfoundland: 0–875 μg/L) than in the systems with populations 10 000 or more (Quebec: 0–364 μg/L; Newfoundland: 2.3–205 μg/L). The study reveals that the differences in THMs between the small and medium/large systems are because of different types of source waters, treatments, disinfection strategies and seasons. The results emphasize that regulatory agencies must focus more on the occurrence of DBPs in small systems and identify strategies to reduce their levels in drinking water.     

Poly dimethylsiloxane/carbon nanofiber nanocomposites: fabrication and characterization of electrical and thermal properties

This article presents the fabrication and characterization of poly dimethylsiloxane/carbon nanofiber (CNF)-based nanocomposites. Although silica and carbon nanoparticles have been traditionally used to reinforce mechanical properties in PDMS matrix nanocomposites, this article focuses on understanding their impacts on electrical and thermal properties. By adjusting both the silica and CNF concentrations, 12 different nanocomposite formulations were studied, and the thermal and electrical properties of these materials were experimentally characterized. The developed nanocomposites were prepared using a solvent-assisted method providing uniform dispersion of the CNFs in the polymer matrix. Scanning electron microscopy was employed to determine the dispersion of the CNFs at different length scales. The thermal properties, such as thermal stability and thermal diffusivity, of the developed nanocomposites were studied using thermogravimetirc and laser flash techniques. Furthermore, the electrical volume conductivity of each type of nanocomposite was tested using the four-probe method to eliminate the effects of contact electrical resistance during measurement. Experimental results showed that both CNFs and silica were able to impact on the overall properties of the synthesized PDMS/CNF nanocomposites. The developed nanocomposites have the potential to be applied to the development of new load sensors in the future.     

Performance Analysis of Ferroelectric GAA MOSFET with Metal Grain Work Function Variability

Silicon - This work represents a unique GAA MOSFET with metal work-function variations (WFVs) and ferroelectric material as dielectric. A random distribution of metal grain (TiN) with grain size...     

Effects of feeding an aquatic weed Lemna trisulaca as partial replacement of fish meal on the performance of growing ducklings

Growing ducklings were fed diets containing an aquatic weed Lemna trisulaca meal (LTM) replacing, on a protein basis, either 40, 60 or 80 g kg^?1 of the fish meal (FM) from a control diet which contained 120 g FM kg^?1. Partial replacement of FM (40 and 60 g kg^?1 of the FM) by LTM on a protein basis showed good growth and low food consumption but food conversion efficiency was found to be comparable. It was concluded that LTM could be considered as a protein feed supplement for growing ducklings and also as a part replacement of animal protein (FM) in the nutrition of growing ducklings without deleterious effect on performance.