Damage and the nonlinear viscoelastic response of glassy polycarbonate and LaRC-TPI

In the bulk, the nonlinear viscoelastic response of glassy polymers is due to the irreversible work done on the body by the surroundings. The source of the irreversibility is plastic flow of material near distributed shear bands or microcracks in the polymer. Shear bands and microcracks also form new traction free boundaries in the body. The presence of these new boundaries diminish the load bearing capacity of the polymer. These changes in polymer lattice structure are a mechanism that promotes the release of stored strain energy. If the release of stored strain energy is stress controlled, then at sufficiently high levels of stress to cause a permanent structural arrangement of the polymer chains, polycarbonate and LaRC-TPI behave as nonlinear viscoelastic materials. If the current stress is less than the maximum stress the polymer has experienced, then the current energy release rate for the propagation of shear bands, crazes, etc., is less than the critical energy release rate. In this instance, damage production is a constant and the material can be modeled using linear viscoelasticity. It will be shown that the stress-induced nonlinear shift factors are a measure of the rate of damage production in glassy polycarbonate.     

Measurements of distribution of self-bias potential on an RF-plane electrode in plasma etching devices

The self-bias potential (V_dc) induced on an RF-powdered electrode (153 mm Ø) in a plasma is measured using electrical probes which are buried in, de-insulated from, and RF-connected to the electrode. The configuration of the probes allows to study the distribution of V_dc discretely on the electrode. The potential is homogeneous in the absence of external magnetic field. In the presence of a homogeneous magnetic field parallel to the electrode, it is reduced and a monotonous gradient takes place in its distribution due to the plasma shift induced by E × B drift. When the magnetic field is rotated along the axis of the RF-electrode at a frequency less than 50 Hz, the distribution, which is almost identical to the one in a static field, rotates with the magnetic field. On the coordinate system rotating with the magnetic field, the probes are regarded to be rotating. The potential distribution is obtained as a continuous function of the azimuthal angle. Thus the rotation of the field provides information for the experimental interpolation.     

In vivo clonal expression of T lymphocytes specific for an immunodominant N-terminal myelin basic protein epitope in healthy individuals

The role of myelin basic protein (MBP) T cell recognition in the induction of experimental allergic encephalomyelitis (EAE) has been well established in mice and rats. A remarkable restriction has been observed in T cell receptor (TCR) genes utilized by encephalitogenic T cell lines (TCLs) specific for immunodominant epitopes in these species. Pathological similarities between this animal model and multiple sclerosis (MS) has led to consider MBP as a major candidate autoantigen in this human disorder. Unlike in inbred strains of animals, the T cell response to MBP in humans is quite heterogenous with regard to fine epitope specificity. The existence of V alpha and/or V beta restriction in MBP-specific T cells, from MS patients and healthy controls, is still a matter of debate. In this study we generated 77 MBP-specific TCLs from nine healthy donors and showed that peptide 7-27 is one of the most frequently recognized epitopes. 37% of all epitope-specific TCLs recognized this peptide and p7-27 specific TCLs were generated from seven out of the nine subjects studied. A high level of in vivo clonal expansion was observed in p7-27-specific TCLs in several subjects, which however is not specific of this epitope since this phenomenon was also observed in p85-104- and 149-162-specific TCLs.     

Effects of forced power transfer on high speed generator-loadsystems

A computer-aided method for investigating disturbances due to the forced paralleling of out of phase high speed salient pole AC generator systems feeding isolated loads is presented. The method is used to predict the system performance including the reverse voltage across the rotating bridge rectifier of the field exciter. This paper presents the fundamentals and the modeling approach used in the development of this method. In addition, the results of using this approach to compute the machine parameters under different load conditions including saturation effects due to magnetic material nonlinearities and space harmonics effects due to machine geometry and winding layouts are presented. The computed parameters are validated by comparison to test data. These parameters form the main data for simulating the forced paralleling of out of phase high speed salient pole AC generator systems feeding isolated loads. Further, the results of using this modeling approach in a case study to predict the system performance due to forced power transfer are summarized and are shown to be in good agreement with test data     

Experimental determination and analytical investigation of certain properties of a free vortex

The scheme of an experiment and certain results of the interaction of a free air vortex tube with a surface are considered. A solution of a differential equation for a plane cross section of a quasisolid tubular vortex core whose density varies according to a polytrope law is analyzed.Odessa Polytechnic University. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 68, No. 2, pp. 212–216, March–April, 1995.     

A novel double-circuit-rotor balanced induction motor for improvedslip-energy recovery drive performance. I. Modeling and simulation

A new construction for the rotor windings of balanced wound-rotor induction motors employed in the slip energy recovery drives is proposed, in this paper, to reduce the time harmonics which are commonly generated in the machine. The proposed machine has a double-circuit in the rotor. One circuit is star connected while the other is delta connected. Each of these two circuits is connected to a diode-bridge rectifier to achieve a twelve-pulse operation characteristics. The main objective of this paper is to develop a new model which is capable of simulating the proposed machine, neglecting nonlinearities due to magnetic saturation, and its associated converters. Such a model is further complicated due to the presence of the two rotor circuits and their mutual interaction     

On basic definitions of unified fracture mechanics terminology

The adoption of unified fracture mechanics terminology (UFMT) will promote efficient communication between specialists in different fields of fracture research, harmonization of national and international standards relating to fracture mechanics, and last but not least improvement of the existing methodology for teaching and education in fatigue and fracture. In this paper the definitions of some basic and related terms included in different standards on fracture mechanics terminology are confronted with one another. Alternative definitions of the same terms are offered. By this strategy the author tries to show that the definitions of basic and related terms appropriate for the UFMT should emerge as a consequence of harmonizing a crack model with an actual crack and then both taken together with a fracture model, laboratory test methods, and failure assessment codes.Published in Problemy Prochonsti, No. 1, pp. 17–29, January, 1996.This paper is published as a matter of discussion.     

Vessel wall detection and blood noise reduction in intravascularultrasound imaging

Scattering from blood limits the contrast between the vessel wall and the lumen in intravascular ultrasound imaging. This makes it difficult to localize the vessel wall, especially on still images. This paper presents a method for automatic detection of vessel walls and reduction of blood noise based on correlation of the RF-signal between adjacent frames. The ultrasound RF-signal is quadrature demodulated, digitized, stored in memory, and transferred to a computer for processing and analysis. The absolute value of the cross-correlation coefficient between two adjacent frames is used to differentiate between stationary and fluctuating signals. Models and numerical calculations presented in this work indicate that the cross-correlation coefficient obtained from a radially dilating vessel wall will be larger than 0.8 under standard 20 MHz imaging conditions. The corresponding value from blood is less than 0.2 for blood velocities exceeding 0.5 cm s^-1 . The blood-noise filter is based on detecting this difference in correlation and displays vessel wall regions with no modifications, while regions detected as blood are rejected. A simplified vessel-wall detector that is suitable for real-time implementation is proposed. The performance of this detector and the blood noise filter are demonstrated by in vitro experiments     

Executing algorithms with hypercube topology on torusmulticomputers

Many parallel algorithms use hypercubes as the communication topology among their processes. When such algorithms are executed on hypercube multicomputers the communication cost is kept minimum since processes can be allocated to processors in such a way that only communication between neighbor processors is required. However, the scalability of hypercube multicomputers is constrained by the fact that the interconnection cost-per-node increases with the total number of nodes. From scalability point of view, meshes and toruses are more interesting classes of interconnection topologies. This paper focuses on the execution of algorithms with hypercube communication topology on multicomputers with mesh or torus interconnection topologies. The proposed approach is based on looking at different embeddings of hypercube graphs onto mesh or torus graphs. The paper concentrates on toruses since an already known embedding, which is called standard embedding, is optimal for meshes. In this paper, an embedding of hypercubes onto toruses of any given dimension is proposed. This novel embedding is called xor embedding. The paper presents a set of performance figures for both the standard and the xor embeddings and shows that the latter outperforms the former for any torus. In addition, it is proven that for a one-dimensional torus (a ring) the xor embedding is optimal in the sense that it minimizes the execution time of a class of parallel algorithms with hypercube topology. This class of algorithms is frequently found in real applications, such as FFT and some class of sorting algorithms     

An expert system with temporal reasoning for alarm processing inpower system control centers

The alarm lists presented to control center operators are usually difficult to interpret. The authors present an expert system that processes the alarm lists in Portuguese control centers. This system makes an intelligent synthesis of the available information and presents it in a flexible and structured way. It uses an original approach to deal with temporal reasoning and real-time constraints. The system incorporates an explanation module that enables its use as a tutor for novice operators