Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (111), Si (100) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disorder in the AIN films increased as determined by X-ray diffraction, FTIR and Raman spectroscopy. The preferred orientation of the film's c-axis changed from completely normal to the film at 100 V, to a mixture of normal and in the plane of the film at 200 V. For AIN films deposited under the same conditions, the films were more highly oriented on sapphire (0001) than in Si (111). The hardness of the films increased from 18.2 to 23.7 GPa with the nitrogen-beam voltage, and possible reasons for this change in hardness are considered.     

Sequential discrete multilevel automated system for recording electron-diffraction patterns

This article considers a discrete sequential multilevel automated system for recording electron-diffraction patterns. A comparative analysis is presented, along with experimental results that make it possible to evaluate the effectiveness of the technical decisions on which the device is based. The general design of the system is presented. Translated from Izmeritel'naya Tekhnika No. 5, pp. 16–18, May, 1996.     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

The unsteady-state thermohydraulic calculation of a stacked core

NIKIÉT. Translated from Atomnaya Énergiya, Vol. 75, No. 4, pp. 265-269, October, 1993.     

The solubility of tungsten in molten iron

The solubility of tungsten in iron has been determined at 1560–1620°C by successively saturating molten iron with tungsten while ensuring a uniform distribution of the content over the height. The temperature dependence of the solubility over that temperature range is described by a Schröder equation: C_s=(3.94±0.11)×10³e-(84.4±0.4)/RT.     

Continuously distributed phase shifts in chirped DFB lasers usingbent waveguides

The authors have implemented chirped distributed feedback (DFB) grating lasers with phase shifts [λ/8, 2λ/8 and 3λ/8] distributed continuously over various axial distances, using their recently proposed method for producing bent optical waveguides. The singlemode stability of the lasers with distributed phase shifts was found to be considerably higher than for lasers with abrupt phase shifts     

Void fraction and pressure drop in two-phase liquid metal flows in channels

Experimental results on void fraction and friction pressure drop in vapour-potassium flows in the high-vapour-quality region up to unity are presentéd. The experimental data obtained and the pertinent results of other authors are generalized, and empirical relationship are suggested to calculate void fraction and pressure drop in two-phase liquid metal flows for channels of various configurations and orientations. The relationships are valid within the range of vapour qualities from almost zero to unit. The experimental data prove the mass velocity to have no influence on the hydrodynamic characteristics within the range of the parameters investigated. It is found in the experiments with heat supply that friction pressure losses are smaller than those for adiabatic conditions. It is shown that this result is in good correspondence with the model of the effect of injection in a boundary layer on the value of shear stresses between cases.     

Mechanism of the early stages of α1 plate formation in a Cu-39 Pct Zn alloy

The early stages in the formation of α₁ plates in the ordered β′ matrix of a Cu-39 pct Zn alloy have been studied with transmission electron microscopy (TEM). The early stage plates were found to be free of stacking faults. Their contrast features are indeed those normally expected from small coherent plates. Electron microdiffraction confirms that these plates have the 9R structure characteristic of α₁ with the same lattice parameters and orientation relationships reported by previous investigators at much later stages of growth. Similarly, the 9R structure was disordered, even though it was formed in an ordered matrix, again repeating previous results obtained at a later stage of growth. These results further support the view that the α₁ Cu-Zn plates form by a diffusion-controlled mechanism. This article is based on a presentation made at the Pacific Rim Conference on the “Roles of Shear and Diffusion in the Formation of Plate-Shaped Transformation Products,” held December 18-22, 1992, in Kona, Hawaii, under the auspices of ASM INTERNATIONAL’S Phase Transformations Committee.     

Our new fragile world doesn't consist of developed and developing countries only

Health conditions have improved worldwide; therefore, the division into developed and developing countries no longer holds true. International organizations tend to divide countries into three groups. An increasing number of people are born in middle income countries where health conditions continue to improve. However, in a number of the least developed countries, mortality is on the rise in a spiral of economic stagnation, environmental problems, social misery, and ethnic/civil conflicts. This requires the medical assistance of international agencies from abroad. Since the 1960s there has been a drastic decline of child mortality in developing countries, especially in Asia. 1 billion people live in countries with child mortality under 20/1000, almost 3 billion live in countries with child mortality ranging 20-100/1000, and over 1 billion live in the least developed countries with child mortality over 100/1000. Unicef divides countries into developed, developing, and least developed countries, while the World Bank groups them as high-, medium-, and low-income countries. Thailand's child mortality is the same as that of Russia, while Cuba has a lower rate than Washington, D.C. On the other hand, Singapore is a developed high-income country with one of the world's healthiest populations. Stagnation and conflicts in the former socialist countries mean that many Asian and Latin American countries have better health status than some parts of Europe. Despite Africa's high mortality, its population growth is the highest in the world: in 20 years its population has doubled. Economic stagnation and the debt burden in many of these countries has resulted in ethnic conflicts and the collapse of social institutions: Somalia, southern Sudan, Rwanda, Liberia, Angola, perhaps Zaire, and Mozambique. The organization Physicians Beyond Borders is an example of extending humanitarian help and combatting social collapse in the least developed countries.     

Interleukin-6 cDNA transfected Lewis lung carcinoma cells show unaltered net tumour growth rate but cause weight loss and shortened survival in syngeneic mice

HuIL-6 cDNA, cloned into a neomycin resistant conferring expression vector, BMGNeo, was transfected into Lewis Lung Carcinoma (LLC) cells. LLC cells (5 x 10(6) ml-1) transfected with IL-6 cDNA (LLC-IL6) secreted IL-6 into the culture supernatant at a concentration of 9.9 ng ml-1 within 48 h. When 1,000,000 of untransfected LLC, BMGNeo vector transfected LLC (LLC-Neo) or LLC-IL6 cells were transplanted into C57BL/6 mice subcutaneously, the mean +/- s.d. of survival times of these mice were 33.3 +/- 9.7, 34.3 +/- 7.1 and 17.0 +/- 3.1 days, respectively. The survival time of LLC-IL6 cells transplanted mice was significantly shorter than that of LLC (P < 0.01) or LLC-Neo (P < 0.01) cells transplanted mice without a measurable difference of tumour size. Plasma concentration of IL-6 steadily increased in LLC-IL6 transplanted mice. Body weight and serum albumin were significantly lower in LLC-IL6 transplanted mice than in LLC transplanted mice. Mouse IL-1 alpha and mouse TNF-alpha were not detected in the plasma of LLC-IL6 transplanted mice. These data suggested that secretion of IL-6 from LLC cells was unable to alter net tumour growth rate but rather caused a state similar to cachexia without detectable increase of IL-1 alpha and TNF-alpha in the plasma. This state may be responsible for the shortened survival of LLC-IL6 tumour-bearing mice.