CMOS circuit testing via time-resolved luminescence measurements and simulations

The continuous trend in modern CMOS technology toward smaller devices and faster clock frequency is challenging the picosecond imaging circuit analysis technique. In this paper we discuss the role of the single-photon avalanche diode with very sharp time resolution in testing CMOS circuits. Thanks to the 30 ps-time resolution, innovative measurements regarding delays and jitter are presented, along with a case study. A compact model of the luminescence is also proposed and used to compare on-chip electrical signals with optical waveforms.     

Implementation of a mechanics-based system for estimating the strength of timber

The most accurate way of determining the strength of lumber requires destructive testing. An intelligent mechanics-based lumber-grading system was developed to provide a better estimation of the strength of a board nondestructively. This system processed X-ray-extracted geometric features (of 1080 boards that eventually underwent destructive strength testing) by using finite element methods to generate associated stress fields. The stress fields were then fed to a feature-extracting-processor, which produced 26 strength predicting features. The best strength predicting features were determined from the coefficient of determination (correlation r/sup 2/) between the features and actual strengths of the boards. The coefficients of determination of each feature (or combination of features), with the actual strength of the board, were calculated and compared. A coefficient of determination of 0.4158 was achieved by using a longitudinal (along the local grain angle) maximum stress concentration (MSC) feature to predict the estimated strength of lumber.     

Effect of magnetic hysteresis on rotational losses in heteropolar magnetic bearings

This paper extends a method for predicting rotational losses for laminated rotors of heteropolar magnetic bearings by using an eddy-current model to include the effect of magnetic hysteresis in the rotor material. It compares the modeling results to the experimental data that were used earlier to assess the loss model neglecting hysteresis. The correction to the total electromagnetic loss in the rotor due to the hysteresis is significant at rotational speeds below 6000 revolutions per minute (RPM), where the model including hysteresis effects provides much better agreement with existing experimental data.     

Analysis of two-dimensional shielded pole heads using singular expansion functions

We have used a series of singular expansion functions to represent the potential across the gap of a shielded pole head in the presence of a highly permeable underlayer. This method of analysis reduces the size of the system of equations to be solved for the series coefficients to the number of coefficients that will be used. Just two series terms suffice to evaluate the magnetic potential to within 1% of the pole potential at any point on the air-bearing surface for a large range of head dimensions. Here, we express the surface field spectrum analytically. Including just two series terms provides an excellent estimate.     

Filtration efficiency and the percolation phenomenon in a grooved-plate Separator

We present here the results of a study of the separation process in the extraction matrix of a novel high-intensity magnetic separator (HIMS). The matrix uses an ordered array of grooved plates (replacing conventional collectors, which are generally made of wires). Only experimental results are available for grooved plates in the literature, but here we propose a new theoretical approach. We report on the particles' behavior, the existence of a percolation phenomenon, and the filtration efficiency, in order to analyze and compare the performance of matrix structures (Lenoir's and Jones'). We discuss the causes of the percolation phenomenon and its effect on filtration efficiency. Correspondence between the theory and the experiments is good. We suggest appropriate uses of each matrix structure according to the property of the processed particles.     

Properties of fine-grained graphites based on two-component fillers

The effect of the nature of two-component fillers on the physical and mechanical properties of finegrained graphites was studied using highly oriented needle coke and nearly isotropic synthetic graphite as components of fillers. Each filler was prepared in the form of coarse (-120 µm) and fine (-10 µm) powders. Different mixtures of these components were used in producing graphite samples, which were then characterized by density, thermal expansion, compressive strength, and modulus of elasticity measurements. The results demonstrate that the thermal expansion, compressive strength, and modulus of elasticity of the graphites thus prepared depend on the microtexture, size, and shape of the filler particles.Translated from Neorganicheskie Materialy, Vol. 40, No. 12, 2004, pp. 1448–1454.Original Russian Text Copyright © 2004 by Samoilov.     

Thermal Transformations of an Aluminoborophosphate Binder

Thermal transformations of a commercial aluminoborophosphate binder are studied in a broad temperature range by optical microscopy, x-ray diffraction, IR spectroscopy, and thermal analysis. The introduction of B₂O₃ reduces the temperature of phosphate polycondensation, enhances the stability of cyclometaphosphates in a broad temperature range (180–1100°C), and reduces the stability of hydrogen phosphates.     

Composition, Structure, and Thermal Expansion of Ca3Fe4S3O6 and CaFeSO

The iron calcium oxysulfides Ca₃Fe₄S₃O₆ and CaFeSO are synthesized by reacting mixtures of CaO and FeS in an inert atmosphere. Their elemental compositions and lattice parameters are determined by x-ray microanalysis and x-ray diffraction. From the temperature-dependent lattice parameters of the oxysulfides (measured up to 1020 K), their thermal expansion coefficients are evaluated.     

Relaxor Behavior of Ge-Doped TlInS2

The dielectric and pyroelectric properties of Ge-doped (0.1 mol %) TlInS₂ crystals are studied. The results demonstrate that TlInS₂ is a ferroelectric relaxor. The experimental data are used to evaluate, using the Vogel–Fulcher relation, the activation energy (0.045 eV), preexponential factor (f ₀ = 2 × 10¹³ Hz), and the dipole-freezing temperature (T _F = 142 K) and to determine the temperature range of the stable relaxor (nanodomain) state and the temperature of the transition to the ferroelectric (macrodomain) state, accompanied by an anomaly in the temperature-dependent pyroelectric coefficient.     

Synthesis and Sintering of Bi2Ti4O11

The conditions of Bi₂Ti₄O₁₁ formation are studied. It is shown that the process is diffusion-controlled and depends significantly on the heating rate. The optimal conditions for producing Bi₂Ti₄O₁₁ ceramics are determined. Cold pressing of Bi₂Ti₄O₁₁ ceramic powder at high pressures is shown to influence the unit-cell parameters and volume, positional parameters of Bi and Ti, and bond distances in the ferroelectric ceramics produced by subsequent sintering. The ferroelectric transition temperature decreases steadily with increasing densification pressure.