Excitation and Detection of Nonlinear Waves on a Charged Surface of Liquid Hydrogen

A new technique for exciting nonlinear waves on a charged surface of liquid hydrogen is described. Methods of optical detection of surface oscillations in experiments on capillary turbulence at frequencies of up to 10 kHz are discussed. The results of a study of capillary waves on the surface of liquid hydrogen are presented.     

PCR-based procedures in detection and DNA-fingerprinting of Salmonella from samples of animal origin

The usefulness of selected PCR-protocols for the detection of Salmonella in 117 samples of animal origin (17 raw minced meat, 27 raw chicken meat, 8 raw sausages, and 25 egg samples, as well as 18 poultry faecal, and caecal swabs samples) and DNA-fingerprinting typing is shown. To establish an accurate PCR-procedure for Salmonella detection the following parameters were evaluated: two pre-PCR concentration procedures, centrifugation and immunomagnetic separation (IMS) using Dynabeads anti- Salmonella; the specificity and sensitivity of 10 sets of primers; and different conditions of the amplification reaction. In light of the results obtained from the use of PCR-based procedures alone or in combination with conventional methods, the following findings can be underlined: First, IMS is more efficient than centrifugation in the recovery of Salmonella. Second, the selected IMS/PCR-detection protocol is less time-consuming (45 h) than the IMS/culture procedure (90 h), and a good concordance between them was found when the Kappa coefficient was calculated (0·87). Third, PCR-ribotyping technique showed a very low discrimination power, being able to differentiate only three profiles. Fourth, RAPD technique using specific primers supports previous works in which it was proposed as a simple and useful tool for discriminating isolates between and within serotypes. Fifth, The efficiency, rapidity, and flexibility of the PCR-protocols applied were high, and they can be performed using two PCR-programs and the same basic equipment.     

Some Regularities of Heat and Mass Transfer in the Case of Fire Within a Building

Results of a numerical investigation of heat and mass transfer at the initial stage of fire within a building in combustion of kerosene, carried out with the use of a three-dimensional mathematical field model, are presented. A comparison of the distribution of the averaged temperatures and velocities along the vertical axis of the convective column and of the mass rates of gas flows through an open opening with the experimental data has been made. Substantial three-dimensional inhomogeneities of the velocities and the temperatures in the near-ceiling layer have been revealed. It has been established that near the opening there is a critical separation zone which influences significantly the parameters of natural gas transfer.     

Predicting the performance of concrete structures exposed to chemically aggressive environment—Field validation

The behavior of two series of concrete slabs exposed to sulfate-bearing soils was investigated by a numerical model called STADIUM. In addition to the diffusion of ions and moisture, the model also accounts for the effects of dissolution/precipitation reactions on the transport mechanisms. The simulations yielded by the model were compared to the actual degradation of the slabs after 8 years of exposure. The microstructural alterations of concrete resulting from the penetration of magnesium, chloride and sulfate ions were studied by backscatter mode scanning electron microscope observations and energy-dispersive X-ray analyses. The comparison of both series of data indicates that the model can reliably predict the various features of the microstructural alterations of concrete.

---

Résumé Le comportement de deux séries de dalles sur sol en béton exposées à des sols chimiquement agressifs a été étudié à l'aide d'un code de calcul numérique appelé STADIUM. Ce modèle permet de décrire le transport couplé de l'eau et des ions dans des matériaux poreux non-saturés en prenant en considération l'influence des réactions chimiques. Les résultats des simultations de la dégradation du béton après huit ans d'exposition à des ions chlore, sulfate et magnésium. Les observations ont été réalisées par microscopie électronique à balayage. Des analyses par dispersion des rayons X ont également été effectuées. Les données démontrent clairement que le modèle perment de prédire avec précision le comportement du béton soumis à différents types d'agression chimique.

---

---

Editorial Note Laval University (Canada) is a RILEM Titular Member. Prof. J. Marchand was awarded the 2000 Robert L'Hermite Medal. He is Editor in Chief for Concrete Science and Engineering and Associate Editor for Materials and Structures. He participates in RILEM TC 186-ISA ‘Internal Sulfate attack’.     

Multifactor Experiments under Superdeep-Penetration Conditions

Consideration is given to the possibility of controlling the efficiency of the process of superdeep penetration of a high-velocity microstriker flux into metal obstacles due to the employment of ballast elements in the jet and to additional supply of energy in compression by an explosive charge along the external perimeter.     

Special features of the periodic-pulse-train laser radiation confinement in doped gallium arsenide and zinc selenide

Experimental data on the pulsed laser radiation confinement in compensated GaAs and ZnSe with deep impurity levels are reported for the laser wavelength λ=1.55 μm and a pulse repetition frequency of up to 100 kHz. It is demonstrated that an increase in the pulse repetition rate is accompanied by a decrease in the energy confinement threshold and by an increase in the radiation attenuation coefficient. These effects are explained by the accumulation of nonequilibrium charge carriers related to a dependence of the recombination time constant on the concentration of free impurity centers.     

Coarse filters for shape matching

This article describes the coarse shape filters that support the 3D, Internet-based search engine ShapeSifter, which aims to locate parts already in production that have a shape similar to a desired new part. The search engine analyzes the target model's shape characteristics and performs a similarity match on the database's contents. Our main challenge is identifying shape metrics that produce effective characterizations of 3D models for similarity comparison. We focus on using three novel convex hull-based indices to carry out a preliminary coarse filtering of candidates prior to more detailed analysis. We also describe the crucial role played by two databases of benchmark objects. Unlike other shape-matching systems, we chose ShapeSifter's architecture (multistep query), 3D representation (triangulated mesh), and implementation (Java3D) to allow deployment online once it matures