A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

Degrees and diversity at work

A study of of over 3000 engineers and scientists employed in the United States explored the interplay of levels of education with gender and native versus immigrant status. The results suggest that some of these R&D professionals may be underutilised and perhaps less effective than they could be     

Achievement of pencil-beam radiation from a TM01 modecircular waveguide source

A method employing appropriately placed parallel-metallic plates in the aperture of a TM₀₁ mode circular waveguide source so as to have it produce pencil-beam radiation is described and analyzed. Programmed computations, with experimental verification, are given for the case of a C-Band TM₀₁ source flared out to a conical horn so as to produce moderate (22 dBi) gain. Means of extending the method to achieve higher gains (40 dBi to 60 dBi) and to modify the plate arrangement so as to produce the same effect with a TE₀₁ mode are briefly outlined     

A partitioning technique for the finite element solution ofelectromagnetic scattering from electrically large dielectric cylinders

A finite element partitioning scheme has been developed to reduce the computational costs of modeling electrically large geometries. In the partitioning scheme, the cylinder is divided into many sections. The finite element method is applied to each section independent of the other sections, and then the solutions in each section are coupled through the use of the tangential field continuity conditions between adjacent sections. Since the coupling matrix is significantly smaller than the original finite element matrix, it is expected that both the CPU time and memory costs can be significantly reduced. The partitioning scheme is coupled to the bymoment method to account for the boundary truncation. Numerical results are presented to demonstrate the efficiency and accuracy of the method     

Experiments on hot electron noise in semiconductor materials forhigh-speed devices

Experimental results on noise temperature and spectral density of current fluctuations (electron diffusion) at high electric fields in silicon, gallium arsenide, and indium phosphide are presented. The dominant noise sources are discussed in their relation to electron scattering mechanisms. Physical backgrounds of high speed-low noise performance (noise-speed tradeoff) are considered. Suppression in short samples of the fluctuations having long correlation time constant and (or) high threshold energy is discussed     

Drain structure optimization for highly reliable deep submicrometern-channel MOSFET

A guideline for n^- fully gate overlapped (FOLD) structure design optimization has been studied. From the viewpoint of reliability, the greatest reduction in substrate current directly leads to the most reliable n^- design for the FOLD structure. The current path modulation phenomenon due to the trapped charge at the n ^- extension region dominates the hot-carrier induced characteristics change for conventional lightly doped drain (LDD) structure with side-wall spacer. This phenomenon is minimized in the FOLD structure due to its higher controllability of the gate electrode than the LDD structure at the n^- extension region. Furthermore, it was also confirmed that the 0.3 μm optimized FOLD structure can achieve high circuit performance at 3.3 V operation, maintaining hot-carrier resistance     

Regulation of the raffinose permease of Escherichia coli by the glucose-specific enzyme IIA of the phosphoenolpyruvate:sugar phosphotransferase system

In enteric bacteria, chromosomally encoded permeases specific for lactose, maltose, and melibiose are allosterically regulated by the glucose-specific enzyme IIA of the phosphotransferase system. We here demonstrate that the plasmid-encoded raffinose permease of enteric bacteria is similarly subject to this type of inhibition.     

Call control and traffic transport for connection-oriented highspeed wireless personal communications over metropolitan area networks

A distributed circuit-switched approach for supporting the deployment of high speed wireless personal communication services in urban areas through the interconnection of base stations via metropolitan area networks (MANs) is proposed. Broadband MANs minimize traffic congestion by dynamic sharing of link capacity and by serving as distributed switches for partitioning call control functions. While the DQDB protocol readily supports distributed packet-switching over the IEEE 802.6 MAN, isochronous traffic such as voice and video is best supported by circuit-switched connections. The authors present an enhanced bi-state pre-arbitrated (PA) transport mechanism, and associated call control and handoff management techniques, which enable distributed circuit-switching over the MAN. These capabilities are not currently addressed in the 802.6 standards. The bi-state PA transport mechanism facilitates statistical multiplexing of variable rate isochronous traffic sources. The network capacity is constrained by the call setup delay performance, and is analyzed by simulations. Alternative signaling architectures, involving different placements of call control network elements, are evaluated. The effects of erasure nodes, and close bus versus open bus architectures, are considered. The overlap inter-MAN call setup procedure is proposed to reduce delays. Different call handoff procedures are formulated according to the type of handoff and the resulting change in call connectivity. Most handoffs are intra-MAN, requiring simple procedures with short delays     

The impact of SONET digital cross-connect system architecture ondistributed restoration

The viability of distributed control restoration using digital cross-connect systems (DCS) depends on its capability for restoring services within specified time requirements, and its economics for providing restoration compared to other alternatives. The authors report a Bellcore study for the impact of the DCS architecture on distributed restoration. This study concludes that currently proposed distributed control DCS self-healing schemes may not meet the 2 second restoration objective for large metropolitan local exchange carrier's networks, regardless of the distributed algorithm used, if the present DCS system architecture which uses serial message processing and serial path cross-connection remains unchanged. They also discuss several DCS architecture enhancement options, including a parallel processing/cross-connect DCS architecture, which may improve the service restoration time