Effect of material characteristics of polyolefins on weld line morphology and its correlation to mechanical properties

The effect of a weld line on the tensile, tensile impact and environmental stress cracking properties of a number of polyethylene (PE) and polypropylene (PP) samples has been investigated. The observed mechanical behaviour has been correlated to material properties, and also to the weld line morphology. PE samples differed in branching, molar mass (Mw) and molar mass distribution (MWD), whereas the PP samples differed in nucleation. The morphology of the weld line formed in injection moulding was analysed by optical microscopy and transmission electron microscopy. The mechanical strength was studied by tensile, tensile impact and constant tensile stress methods. In polyethylene samples with a high Mw, the weld line area was seen through the skin layer to the shear layer, and even down to the beginning of the core layer. The effect of a high Mw on morphological changes was diminished by a broad MWD. Short chain branching limited the morphological change solely to the skin layer. Both PP samples were morphologically rather homogeneous. The weld line created a V-notch on the surface that acted as a crack initiator in mechanical tests and thus reduced the mechanical strength of the weld line samples. The V-notch mainly hid the effect of the morphology on the mechanical properties. © 1998 Chapman & Hall     

Direct monitoring of the calcium concentration in the sarcoplasmic and endoplasmic reticulum of skeletal muscle myotubes

Direct monitoring of the free Ca2+ concentration in the sarcoplasmic reticulum (SR) was carried out in rat skeletal myotubes transfected with a specifically targeted aequorin chimera (srAEQ). Myotubes were also transfected with a chimeric aequorin (erAEQ) that we have demonstrated previously is retained in the endoplasmic reticulum (ER). Immunolocalization analysis showed that although both recombinant proteins are distributed in an endomembrane network identifiable with immature SR, the erAEQ protein was retained also in the perinuclear membrane. The difficulty of measuring [Ca2+] in 100-1000 microM range was overcome with the use of the synthetic coelenterazine analogue, coelenterazine n. We demonstrate that the steady state levels of [Ca2+] measured with srAEQ is around 300 microM, whereas that measured with erAEQ is significantly lower, i.e. around 200 microM. The effects of caffeine, high KCl, and nicotinic receptor stimulation, in the presence or absence of external calcium or after blockade of the Ca-ATPase, were investigated with both chimeras. The kinetics of [Ca2+] changes revealed by the erAEQ were similar, but not identical, neither quantitatively nor qualitatively, to those monitored with the srAEQ, indicating that at this stage of muscle development, differences exist between SR and ER in their mechanisms of Ca2+ handling. The functional implications of these findings are discussed.     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

Production of high-temperature claydite from loams of the Vladimirovskoe Deposit

The possibility of producing high-temperature claydite on the basis of low-grade overburden rocks (loams) of the Vladimirovskoe Deposit is considered. The correcting additives are taken from industrial waste, namely, solar oil and chamotte-kaolin dust from electric filters of rotary kilns.Translated from Ogneupory, No. 4, pp. 26 – 28, April, 1996.     

Manufacture of films displaying liquid-crystalline structure

Reported is an attempt to attain orientation of macromolecules during extrusion of films of cellulose derivatives that led to the liquid-crystalline state of a polymer and resulted in enhanced film strength.     

Nutritional status and delayed mortality following early exposure to measles

Community studies in Guinea-Bissau have found that exposure to measles prior to 6 months of age is associated with delayed mortality later in childhood. In an attempt to understand the underlying mechanism, we examined the role of pre-exposure nutritional status and the impact of exposure to measles on growth and subsequent mortality in these outbreaks. Though exposed children were lighter than controls, there was no association between pre-exposure weight-for-age and subsequent mortality adjusting for age. Although exposure was strongly associated with excess mortality, it did not have a negative impact on growth. Adjustment for state of nutrition did not alter the mortality ratio (MR) between 6 and 59 months of age for exposed children and controls; exposed children examined anthropometrically between 6-17 months had a MR of 3.70 compared with controls. This trend was the same for anthropometric measurements obtained at 18-59 months of age. Among the controls, there was a significant association between weight-for-age and subsequent mortality to the age of 5 years. However, for exposed children there was no association; the relation between weight-for-age and subsequent mortality was significantly different for exposed children compared with controls (tests for interaction between exposure and anthropometric measurements at 6-17 months: P = 0.05). Growth faltering as a consequence of early exposure to measles does not explain the marked excess mortality among these children. Further studies of the process underlying delayed mortality after early exposure to measles are warranted.     

Expression of a mannose/fucose membrane lectin on human dendritic cells

Dendritic cells (CD) are the most efficient antigen presenting cells for T lymphocytes. CD1a+ CD14- CD with high antigen-presenting capacities can now be obtained easily from adherent peripheral blood monocytes by culture in the presence of granulocyte/macrophage colony-stimulating factor and interleukin-4 (Sallusto et al., J. Exp. Med. 1994. 179: 1109). Human macrophages express a membrane lectin, or sugar-specific receptor, which specifically mediates the binding and endocytosis of mannose- and fucose-terminated glycoproteins and is involved in the phagocytosis of pathogens. A similar lectin activity was sought on cultured human DC using flow cytometry and confocal microscopy to detect binding and internalization of fluoresceinated neoglycoproteins [bovine serum albumin (BSA) substituted with sugar residues]. Several neoglycoproteins, especially alpha-L-fucosyl-, alpha-D-mannosyl-, N,N'-di-acetyl-beta-chitobiosyl- and beta-D-glucosyl-BSA, were endocytosed by cultured human CD1a+ DC as well as by CD1a- CD14- cells which were also obtained in the culture. Fuc-BSA and Man-BSA had the same number of binding sites (1.7 x 10(6)/cell) on CD1a+ DC, and bound with an affinity constant close to 10(7) 1/mol. Inhibition experiments indicated that these two neoglycoproteins bound to the same membrane lectin. CD1a+ and CD1a- cells were both labeled by an antiserum specific for the human macrophage mannose receptor. The membrane lectin specific for mannose and fucose that is evidenced in these experiments on cultured DC may be similar to the macrophage membrane lectin or may share functional and structural properties with it.     

Error floor of MSK modulation in a mobile-radio channel with twoindependently fading paths

We investigate the error probability bit error rate (BER) of minimum shift keying (MSK) modulation with differential detection in a two-path fading channel without noise (error floor). We develop a new method for the computation of the BER: we show that errors occur if the phasors of the instantaneous impulse response fall into certain regions of the complex plane; then we average over the statistics of the phasors to arrive at the mean BER. With this method, we derive analytical expressions for the BER for arbitrary amplitude statistics of the paths. For the special case of two Rayleigh-fading paths with small delay, we find that the BER is proportional to the square of the mean delay spread (normalized to the bit length) if we sample between the two pulses. This proves the qualitative behavior of previous estimates, but our results allow also a more exact quantitative formulation. The quadratic dependence of the BER on the delay spread breaks down if we have one Rayleigh-fading and one Rician-fading path. We find that the bit combinations 1-11 and -11-1 do not lead to errors in the two-path model. However, additional Monte Carlo simulations show that these bit combinations do lead to errors in a three-path model     

Large signal analysis of the LCC-type parallel resonant converterusing discrete time domain modeling

A discrete time domain model for the LCC-type parallel resonant power converter has been derived. This model has been used to predict the large signal behavior of the power converter. The peak component stresses and the dynamic response of the key state variables, as obtained from the large signal analysis, using PRO-MATLAB software are plotted. SPICE results are included to verify the analytical results. Experimental results are also presented to verify the theory