Zirconium recovery from zircaloy shavings

A chlorination process for recovering Zr from zircaloy scrap has been studied. Zircaloy chlorination was possible at temperatures as low as 220 °C. The scale microstructure and its effect on the zircaloy reactivity was analysed using Thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDXS) and scanning electron microscopy (SEM) techniques. A solid-solid phase transformation took place into the oxide scale during the zircaloy chlorination. Zirconium, as ZrCl₄(g), was separated from the oxide scale and chlorides of Cr and Fe. The effect of the reaction temperature was also analysed.     

Vessel wall detection and blood noise reduction in intravascularultrasound imaging

Scattering from blood limits the contrast between the vessel wall and the lumen in intravascular ultrasound imaging. This makes it difficult to localize the vessel wall, especially on still images. This paper presents a method for automatic detection of vessel walls and reduction of blood noise based on correlation of the RF-signal between adjacent frames. The ultrasound RF-signal is quadrature demodulated, digitized, stored in memory, and transferred to a computer for processing and analysis. The absolute value of the cross-correlation coefficient between two adjacent frames is used to differentiate between stationary and fluctuating signals. Models and numerical calculations presented in this work indicate that the cross-correlation coefficient obtained from a radially dilating vessel wall will be larger than 0.8 under standard 20 MHz imaging conditions. The corresponding value from blood is less than 0.2 for blood velocities exceeding 0.5 cm s^-1 . The blood-noise filter is based on detecting this difference in correlation and displays vessel wall regions with no modifications, while regions detected as blood are rejected. A simplified vessel-wall detector that is suitable for real-time implementation is proposed. The performance of this detector and the blood noise filter are demonstrated by in vitro experiments     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

Superconductivity and magnetism in niobium doped YBa2Cu3O7 Related high Tc ceramics

Magnetic characterization has been performed on the members of the cuprateniobate RBa₂Cu₂NbO₈ (R = Pr, Nd, and La) series and R_1.5Ce_0.5Sr₂Cu₂NbO₁₀ (R = Pr, Eu, Nd, and Sm) series. The PrBCNO samples show a signature in the magnetization of a magnetic ordering at 12K. The PrCSCNO sample is nonsuperconducting and shows two distinct orderings at 17K and 53K. No such magnetic phase transition is observed down to 2K in the Nd and La based RBCNO materials or the Nd, Sm, and Eu based RCSCNO materials. Measurements of the lower critical field curve, dc irreversibility line, and critical curent densities are reported for each of the superconducting NdCSCNO, SmCSCNO, and EuCSCNO compounds.     

Measurement of the compressive creep strain rates of the individual phases within a lamellar microstructure

A fuducial line technique has been developed to determine the creep properties of the constituent phases within a lamellar composite subject to compression creep deformation. The technique can yield information on the total strain, creep rate, and the stress exponent and activation energy for creep of the individual phases within a lamellar microstructure. The contribution of interphase interfacial sliding to the strain of lamellar composites can also be evaluated by using the fiducial line technique. Application of the fiducial line analysis to a two-phase TiAl/Ti₃Al lamellar alloy deformed in compression at 1080K and 380MPa yields good agreement between the creep strain determined using the fiducial line analysis and the value directly measured from the crept specimen. The fiducial line analysis reveals that the TiAl phase within the two-phase TiAl/Ti₃Al lamellar microstructure creeps 2.2 times faster than the Ti₃Al phase and that interfacial sliding does not contribute to creep deformation of this alloy, within the resolution limit of the fiducial line experiment.     

Maintaining global coherence during reading.

Previous research demonstrated a contradiction effect: Although text currently being processed was locally coherent, readers were aware of inconsistencies between a protagonist's actions and characteristics of the protagonists that were described earlier in the text and subsequently backgrounded. In the present experiments, not only the critical characteristics but also the protagonist were backgrounded. When the protagonist was reintroduced into the narrative in the context of carrying out an inconsistent action, the contradiction effect again occurred. In Exps 1–3, we examined the effects of several variables on the onset of the effect. In Exp 4, we presented probes at various points in the passage with results that supported the conclusion that the critical characteristics had been backgrounded before the sentence that contradicted them. Results are discussed in terms of several recent models in which currently active representational elements serve as retrieval cues for other inactive, but highly related, elements. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Arithmetic coding for data compression

Arithmetic coding provides an effective mechanism for removing redundancy in the encoding of data. We show how arithmetic coding works and describe an efficient implementation that uses table lookup as a first alternative to arithmetic operations. The reduced-precision arithmetic has a provably negligible effect on the amount of compression achieved. We can speed up the implementation further by use of parallel processing. We discuss the role of probability models and how they provide probability information to the arithmetic coder. We conclude with perspectives on the comparative advantages and disadvantages of arithmetic coding