Monitoring the planning quality of health promotion projects in Flanders

The levels of bacterial blood endotoxin, antiendotoxin antibodies and the overall immunity were studied in 48 females with inflammatory genital diseases complicated by pelvioperitonitis. The severest pelvioperitonitis-complicated abnormality was shown to characterized by high concentrations of endotoxin and low levels of antibodies. Endotoxinemia was found to be of diagnostic and prognostic value.     

Characterisation of inter-particle forces within agglomerated metallurgical powders

The strength of agglomerates of nickel flash furnace concentrate and dust was determined from experimental observations of agglomerates forming under controlled conditions, combined with mathematical equations from the literature. It was found that the agglomerates had a tensile strength ranging from 0.01 Pa to 38.7 Pa, while inter-particle forces ranged from 2.2 × 10^− 12 N to 1.5 × 10^− 10 N. These values were compared to the expected magnitude of van der Waals, electrostatic, magnetic and capillary forces within the agglomerates, and it was found that both electrostatic and van der Waals forces are likely to contribute to the cohesion of agglomerates, although sub-micron particles and the presence of sufficiently large asperities on the surface of particles limit the magnitude of van der Waals forces. Magnetic forces are large enough to contribute to the cohesion of dust agglomerates, which is in keeping with the high magnetite content of the recycle dust. It is postulated that electrostatic forces, acting over a longer range than van der Waals forces, may be responsible for initially bringing particles together. The methodology for determining inter-particle forces can be applied to the computer modelling of flash smelting systems, as well as other gas/particle systems such as fluidized beds.     

A Study of The Moisture-Uptake Kinetics of a Hygroscopic Pharmaceutical Powder

The moisture-uptake kinetics of a hygroscopic powder, sodium heparin contained in a cylindrical container, was determined using a novel moisture-uptake measuring device under a constant convective air flow. The amount of moisture uptake increased with the increase in the relative humidity of the air. The effect of powder-bed height on the total amount of moisture uptake was found to be significant only at the highest relative humidity (75%) evaluated in this study. However, the percent of weight increase of the powder as a result of moisture uptake decreases as the height of the powder bed increases. The results of this study are explained by the dynamic nature of the moisture-uptake process associated with the instrument.     

Limited expansion of the (CAG)n repeat of the Huntington gene: a premutation (?)

Pantoprazole is a specific inhibitor of the H+/K(+)-ATPase of the gastric parietal cell. The dose-dependency of a range of pantoprazole pharmacokinetic characteristics was studied. Twelve healthy male subjects were given 10, 20, 40 and 80 mg pantoprazole intravenously according to a randomized, single blind, 4-period change-over scheme. The area under the concentration vs time curve (AUC) and the maximum serum concentration (Cmax) showed a linear increase in line with the dose. Apparent volume of distribution (Vd area), clearance (Cl) and terminal half-life (t1/2) were independent of the dose. The dose-independent elimination of pantoprazole was attributed to the lack of interaction of the drug with cytochrome P450. In clinical practice, a good predictable response, as well as a low potential for interaction with other drugs might be expected.     

Job demands and worker health: Three-dimensional reexamination of the relationship between person€nvironment fit and strain.

The most influential study of the person–environment (P–E) fit approach to stress was conducted by J. R. French et al (1982). Unfortunately, this study operationalized fit using various transformations of difference scores, thereby introducing numerous substantive and methodological problems. In the present study, the authors reanalyze data from French et al, using a procedure described by J. R. Edwards (in press) that avoids problems with difference scores and captures the underlying 3-dimensional relationship between environment, person, and strain. Results resolve ambiguities in the French et al findings and identify relationships between environment, person, and strain that, although consistent with P–E fit theory, cannot be adequately represented by fit measures such as those used by French et al. Implications for P–E fit research are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Distribution and Fate of Escherichia coli in Lake Michigan Following Contamination with Urban Stormwater and Combined Sewer Overflows

Escherichia coli distribution and persistence in nearshore Lake Michigan were assessed following heavy rains and sanitary sewer overflow (SSO) and combined sewer overflow (CSO) events over a 5-year period, including an 18-day period following 25.4 cm of rainfall in which intensive studies were conducted following multiple CSO and SSO events. E. coli levels in the Milwaukee estuary and harbor following SSO and CSO events ranged from 10⁴ to nearly 10⁵ CFU/100 mL, which were significantly higher (p ≤ 0.05) than levels following rainfall alone. Sites outside of the breakwall but within the contamination plume (e.g., within 2 km of the harbor) were an order of magnitude lower. Locations 2–5 km from the harbor ranged from below detection limits, of < 1 to 5 CFU/100 mL. E. coli levels corrected for dilution based on specific conductivity measurements were lower than what would be expected for loss due to dilution alone, suggesting a combination of die-off and dilution, were responsible for the rapid disappearance of these organisms outside of the harbor. E. coli and fecal coliforms measured concurrently demonstrated that fecal coliforms could be recovered longer than E. coli in the open waters of the lake. E. coli isolated directly from sewage treatment plant influent were found to have a marked increase in antibiotic resistance traits for ten antibiotics commonly used in the human population compared with isolates from two animal sources of fecal pollution. However, E. coli obtained from sewage impacted water (n = 2,513) and from stormwater impacted water (n = 1,465) collected the previous year when there were no sewage overflows, were found to have no significant difference (p < 0.05) in the frequency of resistance when comparing the two conditions. E. coli survival characteristics and population dynamics are most likely influenced by multiple factors in complex systems such as the watershed/estuarine/lake environments of the Great Lakes.     

Impact of Preferential P-Diffusion Along the Grain Boundaries on Fine-Grained Polysilicon Solar Cells

Thin-film polysilicon solar cells are a promising low-cost alternative for bulk silicon solar cells due to their reduced material thickness. Recently, we showed that the use of an amorphous silicon/polycrystalline silicon heterojunction emitter instead of a diffused homojunction emitter led to a boost in the open-circuit voltage by 90 mV. Now, we present a full evidence that shows that this improvement is related to the absence of dopant smearing along the grain boundaries. By using scanning spreading resistance microscopy, we found an enlargement of the junction area by a factor of five in case of a homojunction. The tips of the dopant spikes represent lowly doped areas with an enhanced recombination.     

Hybrid cam mechanisms

This paper investigates the problem of driving a machine with several reciprocating heavy inertias. The drive should also realize some programmable flexibility of the motion, so that the operation of the machine, e,g., synchronization between different motions and duration of standstills, can easily be modified. The use of a single servomotor for every motion is not the best solution, since it does not allow for energy recuperation. This means that the installed servomotor power will be much higher than the required net peak power for the machine as a whole. The presented solution, however, reduces the servomotor peak torque and power by one order of magnitude, and makes energy transfer between the motions possible. The hybrid cam mechanism consists of a hybrid drive, which is a combination of a servomotor, a constant velocity motor and a cam follower mechanism. The operation principle exploits the nonlinear characteristics of the cam to add flexibility at low cost of energy. The hybrid solution is particularly successful for motions involving high peak acceleration. In addition, the concept can be used to reject disturbances. Simulations show the performance of the hybrid cam mechanism.