An energy‐efficient asynchronous wake‐up scheme for underwater acoustic sensor networks

In addition to the requirements of the terrestrial sensor network where performance metrics such as throughput and packet delivery delay are often emphasized, energy efficiency becomes an even more significant and challenging issue in underwater acoustic sensor networks, especially when long‐term deployment is required. In this paper, we tackle the problem of energy conservation in underwater acoustic sensor networks for long‐term marine monitoring applications. We propose an asynchronous wake‐up scheme based on combinatorial designs to minimize the working duty cycle of sensor nodes. We prove that network connectivity can be properly maintained using such a design even with a reduced duty cycle. We study the utilization ratio of the sink node and the scalability of the network using multiple sink nodes. Simulation results show that the proposed asynchronous wake‐up scheme can effectively reduce the energy consumption for idle listening and can outperform other cyclic difference set‐based wake‐up schemes. More significantly, high performance is achieved without sacrificing network connectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Experimental study on productivity enhancement of an improvised inclined solar still

Experimental studies are carried out on the inclined solar still with baffle plates for enhancing its performance. The baffles placed in the inclined solar still act as a solar collector which helps in increasing the contact time with solar radiation thereby raising the saline water temperature. Experiments are carried out during winter and early summer climate of Chennai, India. Experimental parameters, such as ambient temperature, solar radiation, glass temperature, water temperature and distillate output are recorded. Hourly productivity is found to be higher during sunny days. The estimated production of fresh water through analytical study is 3.50?kg/m² per day for a minimum mass flow rate of 0.0833?kg/min. The actual experimental yield is 2.793?kg/m² per day. Also, the inlet saline water temperature affects the yield and the latter is found to be highest at 48.5°C.     

Catalyst-Free Direct Vapor-Phase Growth of Hexagonal ZnO Nanowires on <Emphasis>α</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

The evolution of ZnO nanowires has been studied under supersaturation of Zn metal species with and without a ZnO thin-film buffer layer on α-Al₂O₃ deposited by the pulsed laser ablation technique. The nanowires had diameters in the range of 30 nm to 50 nm and lengths in the range of 5 μm to 10 μm with clear hexagonal shape and [000[`1]] [000\bar{1}] , [10[`1]1] [10\bar{1}1] , and [10[`1]0] [10\bar{1}0] facets. X-ray diffraction (XRD) measurements indicated crystalline properties for the ZnO nanostructures grown on pulsed laser deposition (PLD) ZnO nucleation layers. The optical properties were analyzed by photoluminescence (PL) and cathodoluminescence (CL) measurements. The ZnO nanowires were found to emit strong ultraviolet (UV) light at 386 nm and weak green emission as observed by PL measurements. The stoichiometry of Zn and O was found to be close to 1 by x-ray photoelectron spectroscopy (XPS) measurements. The process-dependent growth properties of ZnO nanostructures can be harnessed for future development of nanoelectronic components including optically pumped lasers, optical modulators, detectors, electron emitters, and gas sensors.     

KINETICS OF URANIUM EXTRACTION BY MACROPOROUS BIFUNCTIONAL PHOSPHINIC ACID RESIN

ABSTRACT

The rate of extraction of uranium by macroporous bifunctional phosphinic acid (MPBPA) resin from nitric acid medium has been studied under particle diffusion controlled conditions. The internal diffusion coefficient was found to increase with increase in temperature and decrease with increase in particle size. The activation energies and entropies suggest that the extraction of uranium essentially follows ion exchange mechanism at low concentration of nitric acid while it is through linkage of >P=0 group of the resin at high concentrations.     

A Hybrid RF and Vision Aware Fusion Scheme for Multi-Sensor Wireless Capsule Endoscopic Localization

A huge torrent of data traffic is generated from various heterogeneous applications and services at the Internet backbone. In general, at the backbone, all such applications and services are allocated spectral resources under a shared spectrum environment within elastic optical networks (EONs). In such a fully shared environment, connection requests (CRs) belonging to different traffic profiles compete for spectral resources. Hence, it is very challenging for network operators to resolve resource conflict that occur at the time of provisioning resources to such CRs. The heterogeneous traffic profile (HTP) considered in this work includes permanent lightpath demands (PLDs) and scheduled lightpath demands (SLDs). We propose various distance adaptive routing and spectrum assignment (DA-RSA) heuristics to resolve resource conflict among these two traffic profiles in EONs under a full sharing environment. Conventionally, preemption was the only technique to resolve such resource conflict among HTPs. Since preemption involves the overhead of selecting CRs to be preempted and then deallocating the resources given to those CRs, excessive preemption adversely affects the performance of the network. Therefore, in this work, we utilized bandwidth splitting as a solution to resolve resource conflict among HTPs under such a shared environment in EONs. Moreover, an integrated solution consisting of splitting and preemption is also proposed. We refer to this new integration as flow-based preemption. Our simulation results demonstrate that bandwidth splitting-based heuristics yield significant improvement in terms of the amount of bandwidth accepted in the network, link and node utilization ratio, number of transponders utilized and the amount of bandwidth dropped due to preemption. Moreover, the flow-based preemption approach is proved to be superior in performance amongst all proposed strategies.

     

Technical review: Improvement of mechanical properties and suitability towards armor applications – Alumina composites

Ceramic Matrix Composites (CMCs) have many interesting properties, mainly light weight, cost efficiency, low density, high compressive strength, high hardness and durability. Hence, they emerged as a boon to the development of personnel armors in the past. The current work aims to review various new methodologies adapted for the reinforcement of Alumina (Al₂O₃) CMCs in recent times, including some of the interesting results obtained with respect to mechanical properties, suitability of the synthesized composites for armor applications, and the upcoming reinforcement trends. Finally, studies related to reinforcement in Al₂O₃ CMCs, specifically towards armor applications have been consolidated to arrive at some of the important inferences for concluding reasonably.     

Perovskite-Nanocrystal-Doped Cellulose Nanocrystal Ligands for Electrospun Nanofibers with Excellent Stability

Because of their exceptional physical and thermal properties, cellulose nanocrystals (CNCs) are a highly promising bio-based material for reinforcing fillers. Studies have revealed that some functional groups from CNCs can be used as a capping ligand to coordinate with metal nanoparticles or semiconductor quantum dots during the fabrication of novel complex materials. Therefore, through CNCs ligand encapsulation and electrospinning, perovskite-NC-embedded nanofibers with exceptional optical and thermal stability are demonstrated. The results indicate that, after continuous irradiation or heat cycling, the relative photoluminescence (PL) emission intensity of the CNCs-capped perovskite-NC-embedded nanofibers is maintained at ≈90%. However, the relative PL emission intensity of both ligand-free and long-alkyl-ligand-doped perovskite-NC-embedded nanofibers decrease to almost 0%. These results are attributable to the formation of specific clusters of perovskite NCs along with the CNCs structure and thermal property improvement of polymers. CNCs-doped luminous complex materials offer a promising avenue for stability-demanding optoelectronic devices and other novel optical applications.     

Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu‐Complex Immobilized on Graphitized Mesoporous Carbon

The electrochemical reduction of carbon dioxide (CO₂) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO₂ to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO₂ to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO₂ in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.     

Effect of Oxide Fluxes on Depth of Penetration in Flux Bounded Tungsten Inert Gas Welding of AISI 304L Stainless Steel

Flux Bounded Tungsten Inert Gas (FBTIG) welding is a modified TIG welding process in which increased depth of penetration (DoP) can be achieved by laying thin flux coatings on either side of the weld centerline. The effect of three single component fluxes viz., SiO₂, TiO₂ and Cr₂O₃ on bead geometry of autogenous melt runs in AISI 304L stainless steel for the gap between the flux layers varying from 2 to 7 mm, is studied. Results show that DoP can be improved significantly in FBTIG process using single component fluxes. Nature of the flux and the gap between the flux layers influence the weld bead geometry. Among the three fluxes used, SiO₂ is more efficient in improving the DoP. Arc constriction is the predominant mechanism operative in improving the DoP in FBTIG welding. Possibility of change in solidification mode in FBTIG weld metals of stainless steels is highlighted.