A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

Perfluorocarbons are effective oxygen carriers in cardiopulmonary bypass

Intravascular perfluorochemical (PFC) emulsions together with a high oxygen (O2) tension may increase the delivery of dissolved O2 to useful levels. A severely anemic model of cardiopulmonary bypass (CPB) was used to test the hypothesis that a novel PFC emulsion (PFCE; Oxygent [Alliance Pharmaceutical Corp., San Diego, CA] 90% w/v perflubron) used at a high PO2 during bypass delivers sufficient O2 to ameliorate hypoxic myocardial contractile dysfunction. Acutely anemic dogs (N = 42; hematocrit = 15.8 +/- 0.6% [mean +/- SEM] before CPB and 10.9 +/- 0.1% during CPB) were divided into four groups. Group 1 was a control (n = 12). As CPB was initiated, groups 2 (n = 10), 3 (n = 10), and 4 (n = 10) had 1.35 g PFC.kg-1, 2.7 g PFC.kg-1, or 5.4 g PFC.kg-1 added via the venous return cannula. Pre-CPB and post-CPB cardiac function was measured by the first derivative of left ventricular pressure (dP/dtmax). The dP/dtmax on separation from CPB was: group 1, 619 +/- 96; group 2, 738 +/- 56; group 3, 782 +/- 101; and group 4, 828 +/- 100 (p < 0.05 groups 3 and 4 versus group 1). Mortality during the first hour after separation from CPB was higher in group 1 than in PFCE treated dogs; however, this trend did not attain statistical significance (p < 0.065). The PFC dose was higher in survivors than in nonsurvivors (2.6 +/- 0.4 g PFC.kg-1 versus 1.2 +/- 0.5 g PFC.kg-1; p < 0.05). A PFCE used at a high PO2 provides sufficient physically dissolved O2 to relieve myocardial hypoxic injury in a severely anemic model of CPB. Current PFCEs are effective O2 carriers. This finding suggests that they can be used as a temporary erythrocyte substitute to diminish the need for allogeneic transfusions during cardiac operations.     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

Computational Implementation of Asymmetric Integral Imaging by Use of Two Crossed Lenticular Sheets

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three‐dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one‐dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.     

A Silicon–Silica Nanocomposite Material

The synthesis and characterization of a novel silicon–silica nanocomposite material are reported. A self‐assembly method allows the encapsulation of silicon nanoclusters within the channels of a periodic mesoporous silica thin film. The result is the formation of a silicon–silica nanocomposite film with bright, room‐temperature photoluminescence in the visible range, and a nanosecond luminescence lifetime. The properties of the nanocomposite material have been studied by several analytical techniques, which collectively show the existence within the channels of non‐diamondoid‐structure‐type silicon nanoclusters with various hydrogenated silicon sites. It is estimated that the silicon nanoclusters in the silica mesoporous films occupy up to 39 % of the accessible pore volume. The nanocomposite film shows improved resistance to air oxidation compared to crystalline silicon. The high loading and chemical stability to oxidation under ambient conditions are important advantages in terms of the development of silicon‐based light‐emitting diodes from this class of materials.     

Urban design and conflicting city images of Brazil: Rio de Janeiro and Curitiba

Imageability of places, cities and countries is strongly influenced by tourist and political portraits in the media. As human cognition relies on inferential perception and contrasting categories, marketing strategies exploit partial truths and conflicting city images to direct public perceptions. This article addresses the relationship between international perception, image building and urban design in the case of Brazil and the cities of Rio de Janeiro and Curitiba. Their contrasting images as exploited by the international media expose only partial truths. In fact, these images represent complementary development contradictions that co-exist in any major city today.     

Prebiotic synthesis of sequential peptides on the Hadean beach by a molecular engine working with nitrogen oxides as energy sources

Addressing the still open question of the prebiotic origin of sequential macromolecules (peptides, nucleic acids) on the primitive Earth, we describe a molecular engine (the primary pump), which works at ambient temperature and continuously generates, elongates and complexifies sequential peptides. This new scenario is based on a cyclic reaction sequence, whose keystep is the activation of amino acids into their N‐carboxyanhydrides (NCA) through nitrosation by NOx. This process could have taken place on tidal beaches; it requires a buffered ocean, emerged land and a nitrosating atmosphere. With the help of geochemical studies and computer simulations of atmosphere photochemistry, we show that the primitive Earth during the Hadean may have satisfied all these requirements. © 2001 Society of Chemical Industry.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

Pseudorandomness of Basic Structures in the Block Cipher KASUMI

The notion of pseudorandomness is the theoretical foundation on which to consider the soundness of a basic structure used in some block ciphers. We examine the pseudorandomness of the block cipher KASUMI, which will be used in the next‐generation cellular phones. First, we prove that the four‐round unbalanced MISTY‐type transformation is pseudorandom in order to illustrate the pseudorandomness of the inside round function FI of KASUMI under an adaptive distinguisher model. Second, we show that the three‐round KASUMI‐like structure is not pseudorandom but the four‐round KASUMI‐like structure is pseudorandom under a non‐adaptive distinguisher model.