Maleated Natural Rubber as a Coupling Agent for Recycled High Density Polyethylene/Natural Rubber/Kenaf Powder Biocomposites

Kenaf powder (KP) was incorporated into recycled high density polyethylene (rHDPE)/natural rubber (NR) blend using an internal mixer at 165°C and rotor speed of 50 rpm. The tensile strength and elongation at break of the composites decreased, while the tensile modulus increased with increasing filler loading. The water absorption was found to increase as the filler content increased. The maleic anhydride grafted natural rubber was prepared and used to enhance the composites performance. The addition of MANR as a coupling agent improved the tensile properties of rHDPE/NR/KP biocomposites. The water absorption was also reduced with the addition of MANR.     

Control of the permeability of a porous media using a thermally sensitive polymer

Experiments explore the reduction in permeability of a porous bead pack when a suspension of thermally responsive polymer is injected and the temperature then increased above the thermal activation temperature. The change in permeability is greater with higher polymer concentration, provided that the ionic concentration of the solution is sufficient for floc formation. The time for activation of the blocking effect is within tens of seconds to minutes of when the polymer solution is heated. This is consistent with the timescale for diffusion‐limited aggregation, although the detailed value depends on the geometry and polymer concentration. Dynamical experiments demonstrate that once the porous media is blocked, adding additional polymer has no effect. The mechanism for permeability reduction may be modeled in the context of a pore‐network model, and we build a simple model to illustrate the permeability reduction as a function of the fraction of pores links which are blocked. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1193–1201, 2014     

Facilitating GL13K Peptide Grafting on Polyetheretherketone via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide: Surface Properties and Antibacterial Activity

In the present work, the antimicrobial peptide (AMP) of GL13K was successfully coated onto a polyetheretherketone (PEEK) substrate to investigate its antibacterial activities against Staphylococcus aureus (S. aureus) bacteria. To improve the coating efficiency, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was mixed with a GL13K solution and coated on the PEEK surface for comparison. Both energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) data confirmed 30% greater peptide coating on PEEK/GL13K-EDC than PEEK without EDC treatment. The GL13K graft levels are depicted in the micrograms per square centimeter range. The PEEK/GL13K-EDC sample showed a smoother and lower roughness (Rq of 0.530 µm) than the PEEK/GL13K (0.634 µm) and PEEK (0.697 µm) samples. The surface of the PEEK/GL13K-EDC was more hydrophilic (with a water contact angle of 24°) than the PEEK/GL13K (40°) and pure PEEK (89°) samples. The pure PEEK disc did not exhibit any inhibition zone against S. aureus. After peptide coating, the samples demonstrated significant zones of inhibition: 28 mm and 25 mm for the PEEK/GL13K-EDC and PEEK/GL13K samples, respectively. The bacteria-challenged PEEK sample showed numerous bacteria clusters, whereas PEEK/GL13K contained a little bacteria and PEEK/GL13K-EDC had no bacterial attachment. The results confirm that the GL13K peptide coating was able to induce antibacterial and biofilm-inhibitory effects. To the best of our knowledge, this is the first report of successful GL13K peptide grafting on a PEEK substrate via EDC coupling. The present work illustrates a facile and promising coating technique for a polymeric surface to provide bactericidal activity and biofilm resistance to medical implantable devices.     

Photocatalytic degradation and heat reflectance recovery of waterborne acrylic polymer/ZnO nanocomposite coating

This work aims to clarify the photocatalytic degradation mechanism and heat reflectance recovery performance of waterborne acrylic polymer/ZnO nanocomposite coating. To fabricate the nanocomposite coating, ZnO nanoparticles (nano-ZnO) were dispersed into acrylic polymer matrix at the various concentrations from 1 to 6% (by total weight of resin solids). The photocatalytic degradation of nanocomposite coating under ultraviolet (UV) light irradiation has been investigated by monitoring its weight loss and chemical/microstructural/morphological changes. As the topcoat layer, its heat reflectance recovery has been evaluated under UV/condensation exposure by using an artificial dirty mixture of 85 wt% nanoclay, 10 wt% silica particles (1–5 μm), 1 wt% carbon black, and 2 wt% engine oil. After 108-cycle UV/condensation exposure, infrared spectra and weight loss analysis indicated that the maximal degradation for nanocomposite coating is observed at 1 wt% nano-ZnO. On the other hand, after 96 hr of UV light exposure, the nanocomposite coating with1 wt% nano-ZnO could restore effectively the reflective index of solar-heat reflectance coating (from 58.45 to 80.78%). Finally, the photodegradation mechanism of this waterborne acrylic polymer coating has been proposed as the UV-induced formation of CC CO conjugated double bonds. As a result, its self-cleaning phenomenon can be achieved as the recovery of heat reflectance.     

Antioxidant Activity of Rambutan (Nephelium lappaceum L.) Peel Extract in Soybean Oil during Storage and Deep Frying

Rambutan (Nephelium lappaceum L.) peel (RBP) is discarded as the main by‐product during processing of the fruit. Increasing attention is now paid to the valorization of RBP for the recovery of valuable compounds. Geraniin, ellagic acid, quercetin, and rutin are the main phenolic compounds found in methanolic RBP extract. Extracted rambutan peel powder (ERPP) is used to evaluate the oxidative stability of soybean oil stored at 4 and 30 °C in the dark and light and deep fried with potatoes at 160 °C. Tert‐butylhydroquinone (100 µg g^?1 oil, TBHQ) serves as positive control. Oil supplemented with ERPP of 1000 µg gallic acid equivalents (GAE) g^?1 of oil shows positive effects on the retardation of the oxidation process during storage in comparison with oil without addition. During deep frying, either ERPP (1000 µg GAE g^?1) or TBHQ retards the lipid oxidation of oil. Levels of thiobarbituric acid reactive substances of potatoes fried in oil fortified with the extract and TBHQ (0.4–0.59 µg g^?1) are much lower than those without the extract (1.31 ± 0.10 µg g^?1) (p < 0.05). Therefore, RBP extract exhibits favorable antioxidant effects and can be used for effectively inhibiting lipid oxidation in oil during storage and deep frying. Practical Applications: An extract from rambutan fruit peel containing phenolic compounds, that is, geraniin, ellagic acid, rutin, and quercetin showed promising results to be used as potential antioxidants in soybean oil during deep frying. Both oxidation of the frying oil as well as the oxidation of the food product, that is, potatoes were inhibited. These results demonstrated that rambutan fruit peel extract can be used as a natural antioxidant in frying oil to replace synthetic antioxidants, that is, TBHQ.     

Acylierung von Heterocyclen mit Kohlensäurederivaten. I. Kinetik und Mechanismus der Reaktion von 2-Aminobenzimidazolen mit Arylcyanaten

Acylation of Heterocycles with Carbonic Acid Derivatives. I. Kinetics and Mechanism of the Reaction of 2-Aminobenzimidazoles with Aryl Cyanates The second order rate constants for the reaction of 2-amino-benzimidazoles (2-ABI) with aryl cyanates forming 2-amino-benzimidazole aryl ester imide 3 have been determined in dependence on substituent effects by u. v. measurements. The results are interpreted by a six-membered cyclic transition state in which the electrophilic attack of the cyanate on the endocyclic N atom is catalyzed by an H bridge interaction of the exocyclic amino group of 2-ABI with the OCN group.     

Open dumping site in Asian developing countries: a potential source of polychlorinated dibenz-p-dioxins and polychlorinated dibenzofurans

Open landfill dumping areas for municipal wastes in Asian developing countries have recently received particular attention with regard to environmental pollution problems. Because of the uncontrolled burning of solid wastes, elevated contamination by various toxic chemicals including dioxins and related compounds in these dumping sites has been anticipated. In this study, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (PCBs) were determined in soils from dumping sites in the Philippines, Cambodia, India, and Vietnam. Residue concentrations of PCDD/Fs and coplanar PCBs in dumping site soils were apparently greater than those in soils collected in agricultural or urban areas far from dumping sites, suggesting that dumping sites are potential sources of PCDD/Fs and related compounds. Observed PCDD/F concentrations in soils from dumping sites in the Philippines and Cambodia were comparable or higher than those reported for dioxin-contaminated locations in the world (e.g., near the municipal waste incinerators and open landfill dumping sites). Homologue profiles of PCDD/Fs in dumping site soils from the Philippines and, to a lesser extent, from Cambodia and India reflected patterns of samples representing typical emissions, while profiles of agricultural or urban soils were similar to those of typical environmental sinks. This result suggests recent formation of PCDD/Fs in dumping site areas and that open dumping sites are a potential source of dioxins in Asian developing countries. Uncontrolled combustions of solid wastes by waste pickers, generation of methane gas, and low-temperature burning can be major factors for the formation of dioxins in dumping sites. Elevated fluxes of PCDD/Fs to soils in dumping sites were encountered in the Philippines, Cambodia, India, and Vietnam-Hanoi, and these levels were higher than those reported for other countries. Considerable loading rates of PCDD/Fs in the dumping sites of these countries were observed, ranging from 20 to 3900 mg/yr (0.12-35 mg TEQ/yr). PCDD/F concentrations in some soil samples from the Philippines, Cambodia, India, and Vietnam-Hanoi exceeded environmental guideline values, suggesting potential health effects on humans and wildlife living near these dumping sites. The estimated intakes of dioxins via soil ingestion and dermal exposure for children were higher than those for adults, suggesting greater risk of dioxin exposure for children in dumping sites. To our knowledge, this is the first comprehensive study on PCDD/Fs contamination in open dumping sites of Asian developing countries. On the basis of the result of this study, we have addressed a new environmental issue that open dumping sites are potential sources of PCDD/Fs and related compounds, and dioxin contamination in dumping sites may become a key environmental problem in developing countries.     

Long‐term impact of nitrogen and potassium fertilizers on yield,soil nutrients and biochemical parameters of tea

A field experiment was conducted with tea cultivar UPASI‐9 over a period of 9 years to evaluate the long‐term effects of nitrogen (N) and potassium (K) fertilizers on yield, biochemical parameters, soil and leaf nutrient status. The yield increase was as high as 66% over the control for N application of 450 kg ha^?1 year^?1. Polyphenol and amino acid contents increased with increase in K application rate. Positive and significant correlation was found between nitrate reductase activity and the amino acid content of the tea shoots. While ammoniacal nitrogen in the soil was not affected by the application of fertilizer, ammonium acetate extractable K increased. The failure to apply fertilizer resulted in depletion of the organic matter status of the soil. Although increased rate of nitrogen application increased the overall yield of made tea (kg ha^?1 year^?1), the specific yield (kg kg^?1 N) declined. The soil tended to become acidic from frequent application of high doses of nitrogenous fertilizer. The leaf NK status was significantly influenced by the various treatments. Copyright © 2004 Society of Chemical Industry