Effect of heating and acidic pH on characteristics of wheat gluten suspension

The effects of different pH treatments with and without heating on the characteristics of wheat gluten suspension was investigated. At pH 1, maximum changes in colour were observed with a concurrent 65% decrease in protein free-thiol content compared to the control gluten. The SDS-Extractability of protein (SDS-EP) chromatogram eluted at lower retention time and the presence of bands at the top lane even during reducing conditions in SDS-PAGE gel suggested complex formation involving bonds other than disulphides. An increase in the free-amino group content and the presence of an additional peak at a higher retention time in the SDS-EP chromatogram was suggestive of hydrolysis. At pH 2 and 3, similar decreases in SDS-EPs and free-thiol content indicated formation of complexes. When heated, the free-thiol content of the dispersions increased compared to the non-heated dispersions indicating disruption of disulphide bonds with changes in gluten structure and size distribution.     

Production and characterisation of bio-oil from Gold Mohar (Delonix regia) seed through pyrolysis process

Fast pyrolysis of the crushed Delonix regia seed was carried out in a semi-batch reactor at a temperature ranging from 400 to 650°C with an objective to produce bio-oil. The effect of temperature to obtain an optimum condition for maximum bio-oil yield and the composition of pyrolysis product were investigated. The maximum bio-oil yield was found to be 48?wt% at pyrolysis temperature of 600°C. The chemical composition of bio-oil obtained at optimum condition was analysed using Fourier-transformed infrared spectroscopy and Gas chromatography–mass spectrometry. The chemical analysis of the biofuel showed the presence of hydrocarbons in major, aldehydes, ketones, amides, nitriles, etc. The composition and fuel characteristics of the pyrolysis oil obtained in this work show that it may potentially be used as a renewable fuel and chemical feedstock.     

Production of soya milk containing low flatulence‐causing oligosaccharides in a packed bed reactor using immobilised α‐galactosidase

Peanut α‐galactosidase was immobilised in calcium alginate beads and used to hydrolyse the flatulence‐causing oligosaccharides, raffinose and stachyose, in soya milk in batch and in packed bed reactor with recycle. The immobilised enzyme exhibited a slightly lower activity than the free enzyme. The activity yield of immobilised α‐galactosidase was 75.1% and the immobilisation yield was 82.6%. Batch hydrolysis using immobilised enzyme at 55 °C resulted in 96% reduction in the oligosaccharides after 12 h. For the continuous process, a packed bed reactor with recycle was used. More than 98% of the oligosaccharides were hydrolysed after 6 h of reaction at 55 °C. The immobilised enzyme also proved to be stable up to three repeated hydrolysis reactions.     

Frequency-reconfigurable antennas for multiradio wireless platforms

Looking to increase the functionality of current wireless platforms and to improve their quality of service, we have explored the merits of using frequency-reconfigurable antennas as an alternative for multiband antennas. Our study included an analysis of various reconfigurable and multiband structures such as patches, wires, and combinations. Switches, such as radio-frequency microelectromechanical systems (RFMEMS) and p-i-n diodes, were also studied and directly incorporated onto antenna structures to successfully form frequency-reconfigurable antennas.     

Study and Analysis of the Effect of Harmonics on the Hot Spot Temperature of a Distribution Transformer Using Finite-Volume Method

Transformers are critical components in power systems and their failure can cause long interruption of power supply. The condition of a transformer can be monitored by performing thermal analysis. The use of non-linear devices, such as rectifiers and converters, draws harmonic currents that increase losses in transformers, thereby increasing their operating temperature. In this article, a new numerical approach is presented for determining the rise in hot spot temperature in a 5-kVA, 400/400-V dry-type three-phase transformer laboratory prototype. The key novelty is that the additional winding eddy current loss due to non-linear loads is considered in the numerical modeling. The winding eddy current loss corresponding to harmonic distortion is estimated by conducting experiments and calculations. Numerical simulations are carried out for a wide range of non-linear loads using a commercial computational fluid dynamics package, FLUENT 6.3. The proposed numerical methodology is validated by performing experiments on the transformer for possible non-linear loads and comparing the measured hot spot temperature with the simulated values. Correlation equations for rise in hot spot temperature as a function of total harmonic distortion are presented, which can be used for estimating the life of transformers when connected to different types of loads.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

A Novel Highly Sensitive Humidity Sensor Based on ZnO/SBA‐15 Hybrid Nanocomposite

This work deals with the study of hydrothermally synthesized zinc oxide (ZnO) loaded mesoporous SBA‐15 hybrid nanocomposite for relative humidity sensing (RH) at room temperature. The sensor exhibits an excellent ~5 orders impedance change along with excellent linearity, quick response time (17 s), rapid recovery time (18 s), negligible hysteresis (1.2%), good repeatability, and stability (1.8%) in 11%–98% RH range. In addition, complex impedance spectra of the sensor at different RHs were analyzed to understand the humidity sensing mechanism. Our study can open a new way for realizing ZnO/SBA‐15 hybrid nanocomposite for fabrication of high‐performance RH sensors.     

Carbon Doping in Boron Suboxide: Structure,Energetics, and Elastic Properties

The structural, electronic, and elastic properties of pristine and carbon‐doped boron suboxide (B₆O) are calculated using density functional theory. The results indicate that it is energetically preferable for a single carbon atom to substitute into an oxygen site rather than a boron site. The lattice parameters and cell volume increase to relieve the residual stress created by the carbon substitution. The interstitial position is not favorable for a single atom substitution. However, if two carbon atoms substitute for two neighboring oxygen atoms, then it becomes energetically favorable to dope an interstitial oxygen, boron, or carbon atom along the C–C chain. If the interstitial dopant is either boron or carbon, a local B₄C‐like structure with either a C–B–C or C–C–C chain is created within the boron suboxide unit cell. The resulting structure shows improvements in the bulk modulus at the expense of the shear and Young's moduli. The moduli further improve if an additional carbon is substituted within a polar or equatorial site of the neighboring B₁₂ icosahedron. Based on these calculations, we conclude that carbon doping can either harden or soften B₆O depending on the manner in which the substitutions are populated. Furthermore, as B₆O samples are often oxygen deficient, C doping can occupy such sites and improve the elastic properties.