Surfactant‐mediated synthesis of polyhydroxybutyrate (PHB) nanoparticles for sustained drug delivery

In this study, polyhydroxybutyrate (PHB) nanoparticles were synthesised following nanoprecipitation method having different solvents and surfactant (Tween 80) concentrations. In this study, PHB nanoparticles were encapsulated with curcumin and subjected for sustained curcumin delivery. Both the curcumin loaded and unloaded PHB nanoparticles were characterised using FTIR, SEM, and AFM. Sizes of the particles were found to be between 60 and 300 nm. The drug encapsulation efficiency and in vitro drug release of the nanoparticles were analysed. Antibacterial activity and anticancer activity were also evaluated. The LC₅₀ values of most of the nanoparticles were found to be between 10 and 20 µg/100 µl, anticancer activity of curcumin loaded PHB nanoparticles were further confirmed by AO/PI staining and mitochondrial depolarisation assay.Inspec keywords: encapsulation, cancer, scanning electron microscopy, nanoparticles, surfactants, drugs, nanofabrication, antibacterial activity, biomedical materials, drug delivery systems, polymers, nanomedicine, Fourier transform infrared spectra, precipitation (physical chemistry), atomic force microscopy, particle sizeOther keywords: surfactant‐mediated synthesis, polyhydroxybutyrate nanoparticles, sustained drug delivery, surfactant concentrations, PHB nanoparticles, sustained curcumin delivery, drug encapsulation efficiency, anticancer activity, in vitro drug release, nanoprecipitation method, Tween 80, FTIR spectra, SEM, AFM, particle sizes, antibacterial activity, AO‐PI staining, mitochondrial depolarisation assay     

Friction stir welding of thick section reduced activation ferritic–martensitic steel

Full penetration friction stir welding was conducted on 12?mm thick reduced activation ferritic–martensitic steel at tool rotational speeds of 500 and 900?rev?min^?1. Comparator welds at 500?rev?min^?1 were also produced in 6?mm thick reduced activation ferritic–martensitic steel plate to evaluate section thickness effects. Increase in section thickness led to an increase in heat input, which strongly influenced the microstructure evolution in stir zone (SZ), thermo-mechanical affected zone and the overall hardness in the SZ of this steel. In the as-welded condition, the base metal microstructure was significantly altered and resulted in carbide-free grain boundaries. The desirable microstructure and mechanical properties were achieved by subjecting the as-welded joints to appropriate post-weld heat treatments.     

Effect of external loads on damage detection of rubber‐toughened nanocomposites using carbon nanotubes sensory network

Multiwalled carbon nanotubes of 0.2% weight fraction are used as a sensory network for detecting and characterizing the damage of particulate epoxy composites under shear loading conditions. Three different weight fractions of carboxyl‐terminated butadiene acrylonitrile copolymer rubber [10 parts per hundred of epoxy resin (phr), 20 phr, and 30 phr] are used for toughening a thermoset epoxy composite. The electrical response of the specimens is measured, nearest the central shearing plane, using a four‐circumferential ring probe technique in conjunction with a high‐resolution data acquisition system. A collection of the electromechanical response results are reported with respect to the shear strain. The resistance changes observed under shear loading are related to nonlinear deformation mechanisms, void initiation, and growth around rubber particulate. With increasing rubber content, the strength of the material decreases and a greater drop in resistance is recorded as a result of decreased distance between neighboring carbon nanotubes (CNTs) due to declustering and straightening of molecular chains of host matrix. In the end, a comparison for 30 phr composites under shear loading with that of tensile and compression loading conditions is presented. For initial deformation, there is no change in resistance under shear loading condition; however, the significant resistance change can be noticed under both tension and compression. The specimen under shear loading conditions experiences smaller decrease in resistance when compared with both tension and compression. However, the decrease in resistance is higher for compression due to higher decrease in distance between neighboring CNTs. POLYM. COMPOS., 37:360–369, 2016. © 2014 Society of Plastics Engineers     

Conductivity study of polyethylene oxide (PEO) complexed with sodium bicarbonate

Ion conducting thin film polymer electrolytes based on polyethylene oxide (PEO) complexed with NaHCO₃ salt has been prepared using solution-cast technique. The complexation of NaHCO₃ salt with PEO is confirmed by XRD and IR studies. DC conductivity in the temperature range 303–368 K has been evaluated. The conductivity is found to increase in the PEO complex with the NaHCO₃ salt and also with an increase in temperature. Using this polymer electrolyte, an electrochemical cell with the configuration Na/(PEO + NaHCO₃)/(I₂ + C + electrolyte) has been fabricated and its discharge characteristics studied. Open Circuit Voltage (OCV) and Short Circuit Current (SCC) are found to be 2.69 V and 1.28 mA, respectively. Other parameters associated with the cell are evaluated and presented in this paper.     

Polarization measurements on single-step co-fired solid oxide fuel cells (SOFCs)

Anode-supported planar solid oxide fuel cells (SOFC) were successfully fabricated by a single step co-firing process. The cells comprised of a Ni + yttria-stabilized zirconia (YSZ) anode, a YSZ or scandia-stabilized zirconia (ScSZ) electrolyte, a (La_0.85Ca_0.15)_0.97MnO₃ (LCM) + YSZ cathode active layer, and an LCM cathode current collector layer. The fabrication process involved tape casting of the anode, screen printing of the electrolyte and the cathode, and single step co-firing of the green-state cells in the temperature range of 1300–1330 °C for 2 h. Cells were tested in the temperature range of 700–800 °C with humidified hydrogen as fuel and air as oxidant. Cell test results and polarization modeling showed that the polarization losses were dominated by the ohmic loss associated with the electrodes and the activation polarization of the cathode, and that the ohmic loss due to the ionic resistance of the electrolyte and the activation polarization of the anode were relatively insignificant. Ohmic resistance associated with the electrode was lowered by improving the electrical contact between the electrode and the current collector. Activation polarization of the cathode was reduced by the improvement of the microstructure of the cathode active layer and lowering the cell sintering temperature. The cell performance was further improved by increasing the porosity in the anode. As a result, the maximum power density of 1.5 W cm⁻² was achieved at 800 °C with humidified hydrogen and air.     

Plasticizing effect of biodegradable dipropylene glycol bibenzoate and epoxidized linseed oil on diglycidyl ether of bisphenol A based epoxy resin

Major limitation for use of epoxy thermosets in engineering applications is its sudden brittle failure. In the present study dipropylene glycol dibenzoate (DPGDB) based plasticizer is used to modify diglycidyl ether of bisphenol A (DEGEBA) based epoxy resin system via simple blending technique. Bio-based epoxidized linseed oil was also used to modify epoxy resin system and compared with DPGDB modified resin. For DPGDB modified resin storage modulus and loss modulus of the epoxy system modified with 10% plasticizer increased by 7.54% and 12.24%, respectively. The primary mechanism responsible for such behavior is improved crosslinking density. With 5% plasticizer loading, flexural strength increased by 21%. There was an improvement of 312.74% in strain at failure for 10% plasticizer loading, while preserving its mechanical strength. It was found that DPGDB based modification was better than epoxidized linseed oil modification.     

Inhibitory effect of spices on in vitro histamine production and histidine decarboxylase activity ofMorganella morganii and on the biogenic amine formation in mackerel stored at 30°C

The inhibitory effects of clove, cinnamon, cardamom, turmeric and pepper on the histamine production and histidine decarboxylase activity ofMorganella morganii (a potent histamine-producing bacteria in fish) was examined at 30°C using HPLC. Cinnamon and clove exhibited a significant (P<0.01) inhibitory effect, whereas turmeric and cardamom had a moderate effect. These spices were applied to whole mackerel at a level of 3% and their inhibitory effect on biogenic amine formation at 30°C was also examined. As in the in vitro study, clove and cinnamon showed a significant (P< 0.05) inhibitory effect on histamine, putrescine and tyramine formation but not on that of cadaverine. Cardamom and turmeric exhibited a moderate effect and pepper was ineffective. Therefore, clove and cinnamon are more helpful than cardamom and turmeric in the minimization of the formation of toxic histamine in mackerel.     

Mixed-mode crack-tip stress fields for orthotropic functionally graded materials

Quasi-static mixed mode stress fields for a crack in orthotropic inhomogeneous medium are developed using asymptotic analysis coupled with Westergaard stress function approach. In the problem formulation, the elastic constants E ₁₁, E ₂₂, G ₁₂, ν ₁₂ are replaced by an effective stiffness ${E=\sqrt {E_{11} E_{22}}}$ , a stiffness ratio ${\delta =\left({{E_{11}}\mathord{\left/ {\vphantom {{E_{11}} {E_{22}}}}\right. \kern-0em} {E_{22}}} \right)}$ , an effective Poisson’s ratio ${\nu =\sqrt {\nu_{12}\nu _{21}} }$ and a shear parameter ${k=\left({E \mathord{\left/ {\vphantom {E {2G_{12}}}}\right. \kern-0em} {2G_{12}}}\right)-\nu }$ . An assumption is made to vary the effective stiffness exponentially along one of the principal axes of orthotropy. The mode-mixity due to the crack orientation with respect to the property gradient is accommodated in the analysis through superposition of opening and shear modes. The expansion of stress fields consisting of the first four terms are derived to explicitly bring out the influence of nonhomogeneity on the structure of the mixed-mode stress field equations. Using the derived mixed-mode stress field equations, the isochromatic fringe contours are developed to understand the variation of stress field around the crack tip as a function of both orthotropic stiffness ratio and non-homogeneous coefficient.     

Sonochemical synthesis of crystalline nanoporous zinc oxide spheres and their application in dye-sensitized solar cells

A composite material made of zinc oxide and polyvinyl alcohol was prepared by a sonochemical method. Annealing of the composite under air removed the polymer, leaving porous spheres of ZnO. This change was accompanied by a change of the surface area from 2 m²/g to 34 m²/g. The porous ZnO particles were used as the electrode material for dye-sensitized solar cells (DSSCs). It was tested by forming a film of the doped porous ZnO on a conductive glass support. The performance of the solar cell is reported.     

Structural modification by different pretreatment methods to enhance microwave-assisted extraction of β-carotene from carrots

Since the structure of a material is a key factor influencing the extraction efficiency, any means to modify the structure to enhance extraction is attractive. As limited information is available on the effect of sample pretreatment prior to extraction on the extractability of a bioactive compound, the effects of selected pretreatment methods, i.e., soaking in citric acid, blanching in water as well as in citric acid, on the sample structure and subsequent microwave-assisted extraction (MAE) were investigated; carrots and β-carotene (as well as carotenoids) were selected as the test material and bioactive compound, respectively. A suitable condition to extract β-carotene in terms of the microwave power and extraction time was determined. Comparison between MAE and Soxhlet extraction was also made. At the optimized condition the contents of β-carotene and total carotenoids extractable from carrots blanched in water (29.74 and 58.04 mg/100 g dry basis) and in citric acid (32.08 and 61.62 mg/100 g dry basis) were significantly higher than those from the untreated carrots (23.26 and 51.79 mg/100 g dry basis). The antioxidant activities of the extracts obtained from carrots blanched in water and in citric acid were also higher than that from carrots with no pretreatment. Comparison between MAE and Soxhlet extraction revealed that the extract from MAE contained lower amounts of β-carotene and total carotenoids and exhibited lower antioxidant activity; the required MAE time was significantly shorter, however.