Multivariate statistical analysis of a high rate biofilm process treating kraft mill bleach plant effluent.

This study reports on a multivariate analysis of the moving bed biofilm reactor (MBBR) wastewater treatment system at a Canadian pulp mill. The modelling approach involved a data overview by principal component analysis (PCA) followed by partial least squares (PLS) modelling with the objective of explaining and predicting changes in the BOD output of the reactor. Over two years of data with 87 process measurements were used to build the models. Variables were collected from the MBBR control scheme as well as upstream in the bleach plant and in digestion. To account for process dynamics, a variable lagging approach was used for variables with significant temporal correlations. It was found that wood type pulped at the mill was a significant variable governing reactor performance. Other important variables included flow parameters, faults in the temperature or pH control of the reactor, and some potential indirect indicators of biomass activity (residual nitrogen and pH out). The most predictive model was found to have an RMSEP value of 606 kgBOD/d, representing a 14.5% average error. This was a good fit, given the measurement error of the BOD test. Overall, the statistical approach was effective in describing and predicting MBBR treatment performance.     

Evaluation of humoral immune responses in cattle grazing endophyte-infected or endophyte-free fescue

Anecdotal reports suggest cattle with fescue toxicosis may not respond to vaccination and thus, experience increased incidence of Bovine Respiratory Disease Complex (BRDC) when shipped to feedlots. Fescue toxicosis causes hypoprolactemia in cattle. Hypoprolactemia decreases humoral immune responses in mice. Therefore, a study was conducted to compare the magnitude of primary and secondary humoral immune responses against specific antigens in cattle grazing endophyte-infected or endophyte-free fescue. Angus steers were blocked by weight and allocated into four groups. Two groups grazed endophyte-infected (EI) fescue and the other two groups grazed endophyte-free (EF) fescue. All steers were injected IM on d 0 and 21 with lysozyme without adjuvant and concanavalin. A (Con A) with sheep red blood cells (SRBC) in incomplete adjuvant of Freund. Steers were bled on days 0, 21 and 35 post-vaccination. Average daily gains (ADG), alkaline phosphatase (ALP) activity, cholesterol concentrations, rectal temperatures, and serum prolactin concentrations were measured to confirm fescue toxicosis in steers grazing EI fescue. Antibodies to Con A and SRBC were determined by ELISA and hemagglutination assay, respectively. The ADG were decreased for the EI group during the first month. Rectal temperature were elevated and serum prolactin concentrations were decreased in the EI group. Cholesterol and ALP concentrations also were decreased in the EI group. Primary and secondary immune responses against Con A tended to be increased and were increased against SRBC in the EI group. Antibodies against lysozyme were not induced in either group. In conclusion, cattle grazing EI fescue mounted similar humoral immune responses to vaccination, despite hypoprolactemia, as cattle grazing EF fescue. Increases in bovine respiratory disease in cattle maintained on EI fescue probably is not associated with lack of humoral immune response to vaccination protocols as a result of fescue toxicosis.     

The Determination of the Level of Bicarbonate, Carbonate, or Carbon Dioxide in Aqueous Solutions

A rapid and convenient method for the measurement of bicarbonate, carbonate, or carbon dioxide in water was developed using fourier transform infrared spectroscopy (FTIR). Bicarbonate and carbonate are converted to carbon dioxide by lowering the pH of the solution, then the absorbance of the dissolved carbon dioxide at 2345 wavenumbers is measured using a liquid sample cell. If the measurement of dissolved carbon dioxide is the objective, the pH is not adjusted, and the carbon dioxide in the free form can be measured without interference from low levels of carbonates. The method is linear from 10.48 ppm to a minimum of 366.8 ppm carbon dioxide (r squared = 0.9996). The coefficient of variation at 10.48 ppm (LOD 3 signal/noise), 52.4 ppm, and 262 ppm is 45.6, 4.0, and 3.9, respectively. The average percent recovery at 10.48 ppm, 52.4 ppm, and 262 ppm is 74.5, 104.2, and 104.0, respectively.     

Progressive neuronal degeneration of childhood (Alpers syndrome) with hepatic cirrhosis

A new technique for right heart catheterization using a Mullins' sheath is described. This device allows a Swan-Ganz catheter to reach pulmonary artery position easily and permits simultaneous pressure recordings in right heart chambers, thus avoiding a double venous puncture and two catheters. This new technique, its indications, and our experience in 29 patients are described. It is most useful in patients with severe pulmonary hypertension and in those conditions in which accurate right heart pressure measurements are needed.     

Laboratory evaluation of the XR-Bond Dentin/Enamel Bonding System

The shear bond strengths of the XR-Bonding System used in conjunction with Herculite composite, to the dentine of forty extracted human permanent first and second molars were determined after the test specimens were stored in physiological saline at 37 degrees C for 48 hours, one week, two weeks and four weeks, respectively. A shear load was applied to the base of the bonded composite cylinders with a knife-edged rod at a crosshead speed of 0.5 mm/minute. The shear bond strengths were expressed in megapascals (MPa). The quantitative microleakage of Class V preparations in dentine (cementum) in forty-eight extracted human maxillary permanent canines restored with the same dentinal bonding system and after storage in physiological saline at 37 degrees C for the same time intervals as for the shear bond strength tests, was determined. On the final day of each time interval the teeth were thermocycled X 500 in a 2 per cent methylene blue solution between 8 degrees C and 50 degrees C with a dwell time of 15 seconds. Microleakage was determined by a spectrophotometric dye-recovery method and expressed in microgram dye/restoration. There was a significant trend for the shear bond strengths to increase with duration of storage (p = 0.01) but the quantitative microleakage was not significantly different (p = 0.75).     

Family burden following traumatic brain injury.

Investigated burden experienced by 60 spouses and 71 parents who served as primary caregivers to individuals with traumatic brain injury (BI). Burden levels, as assessed by the Questionnaire on Resources and Stress (QRS-SF), were compared for spouses and parents. Both parents and spouses exhibited high levels of burden. Relative to spouses, parents reported significantly greater burden related to lifespan care. Spouses reported significantly less personal reward than did parents. The presence of social aggression and cognitive disability in the individual with BI was found to have a greater association with subjective burden of caregivers than was the presence of physical disability or injury severity. Results of previous studies with QRS-SF scores show that the responsibility assumed by spouses and parents of persons with BI was as great as that experienced by families of people with severe chronic physical disabilities. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Isotherm analyses for single component and multi-component metal sorption onto lignite

The adsorption of the three metal ions, copper, cadmium and zinc in single component and multi-component mixtures in aqueous solutions by lignite is reported. A comparison is made between the single component saturation uptake and the multi-component uptakes. The isotherms indicate a competitive uptake with copper being preferentially absorbed by the lignite in multi-component solutions. The isotherms are plotted to obtain the Langmuir constants, the Freundlich constants and the Redlich–Peterson constants. Lignite is shown to possess an affinity for the metal ions which make its use as an adsorbent a possible alternative to the use of more expensive activated carbons.     

Effect of magnesium on the composition,microstructure and mechanical properties of carbon fibres

This work was undertaken in order to provide more detailed information on the chemical and mechanical behaviour of carbon fibres during the elaboration of graphite-magnesium composite materials. For this purpose, PAN-based T300, pitch-based P55 and P100 carbon fibres were isothermally heat treated, at temperatures ranging from 450 to 700 °C, under a saturated vapour pressure of magnesium. The composition, microstructure and tensile strength of the resulting samples were characterized by chemical and electron probe microanalysis, Raman spectrometry, X-ray diffraction and mechanical test of single filaments. From the results obtained, it has been concluded that highly graphitized fibres such as pitch-based P55 or P100 are not affected by long-time annealing in the presence of magnesium vapour, whereas impure and disorded fibres such as PAN-based T300 undergo some chemical and microstructural modifications decreasing their mechanical properties.     

Room-temperature deformation and stress-induced phase transformation of laves phases in Fe-10 At. Pct Zr alloy

The microstructure within particles of the Laves phase Fe₂Zr in a two-phase Fe-10 at. pct Zr alloy after compression was investigated using X-ray diffraction and electron microscopy. Stressinduced phase transformation between C36 and C15 structures was found to be a major deformation mode for the Laves phase. Twinning and stacking faults were also found within C15 regions. Phase transformation models based on partial dislocations are discussed.     

Using rainbow net simulation to measure fault tolerance in a multiprocessor

The Rainbow net simulation technique is applied to modelling the impact of system load and fault handling on the availability of a fault-tolerant multiprocessor architecture. Rainbow nets are described along with the motivation for creating this modelling technique. A Rainbow net fault-handling model is created for the fault-tolerant multiprocessor architecture and the topology is shown to remain constant in size, independent of the number of processor, memory and I/O elements configured in the system. Simulation is performed with a varying load in terms of the number of active jobs the system must support. Results are given showing how the fault-tolerant capability varies with load. Two new metrics for evaluating fault tolerance are introduced; namely full fault-tolerability and partial fault-tolerability. They are based on simple observations in the model.