Impact of Blend Morphology on Interface State Recombination in Bulk Heterojunction Organic Solar Cells

This work is a reinvestigation of the impact of blend morphology and thermal annealing on the electrical performance of regioregular‐P3HT:PC₆₀BM bulk heterojunction organic solar cells. The morphological, structural, and electrical properties of the blend are experimentally investigated with atomic force microscopy, X‐ray diffraction, and time‐of‐flight measurements. Current–voltage characteristics of photodiode devices are measured in the dark and under illumination. Finally, the existence of exponential electronic band tails due to gap states is experimentally confirmed by measuring the device spectral response in the subband gap regime. This method reveals the existence of a large density of gap states, which is partially and systematically reduced by thermal annealing. When the band tails are properly accounted for in the drift and diffusion simulations, experimentally measured charge transport characteristics, under both dark and illuminated conditions and as a function of annealing time, can be satisfactorily reproduced. This work further confirms the critical impact of tails states on the performance of solar cells.     

Theoretical and Experimental Insight into the Mechanism for Spontaneous Vertical Growth of ReS2 Nanosheets

Rhenium disulfide (ReS₂) differs fundamentally from other group‐VI transition metal dichalcogenides (TMDs) due to its low structural symmetry, which results in its optical and electrical anisotropy. Although vertical growth is observed in some TMDs under special growth conditions, vertical growth in ReS₂ is very different in that it is highly spontaneous and substrate‐independent. In this study, the mechanism that underpins the thermodynamically favorable vertical growth mode of ReS₂ is uncovered. It is found that the governing mechanism for ReS₂ growth involves two distinct stages. In the first stage, ReS₂ grows parallel to the growth substrate, consistent with conventional TMD growth. However, subsequent vertical growth is nucleated at points on the lattice where Re atoms are “pinched” together. At such sites, an additional Re atom binds with the cluster of pinched Re atoms, leaving an under‐coordinated S atom protruding out of the ReS₂ plane. This under‐coordinated S is “reactive” and binds to free Re and S atoms, initiating growth in a direction perpendicular to the ReS₂ surface. The utility of such vertical ReS₂ arrays in applications where high surface‐to‐volume ratio and electric‐field enhancement are essential, such as surface enhanced Raman spectroscopy, field emission, and solar‐based disinfection of bacteria, is demonstrated.     

A thorough investigation of MOSFETs NBTI degradation

An overview of evolution of transistor parameters under negative bias temperature instability stress conditions commonly observed in p-MOSFETs in recent technologies is presented. The physical mechanisms of the degradation as well as the different defects involved have been discussed according to a systematic set of experiments with different stress conditions. According to our findings, a physical model is proposed which could be used to more accurately predict the transistor degradation. Finally, the influence of different process splits as the gate oxide nitridation, the nitrogen content, the source/drain implant and poly doping level on the NBTI degradation is investigated and discussed with our present understanding.     

Ni-based Plasmonic/Magnetic Nanostructures as Efficient Light Absorbers for Steam Generation

Solar steam generation technologies have gained increasing attention due to their great potential for clean water generation with low energy consumption. The rational design of a light absorber that can maximize solar energy utilization is therefore of great importance. Here, the synthesis of Ni@C@SiO₂ core–shell nanoparticles as promising light absorbers for steam generation by taking advantage of the plasmonic excitation of Ni nanoparticles, the broadband absorption of carbon, and the protective function and hydrophilic property of silica is reported. The nanoparticle-based evaporator shows an excellent photothermal efficiency of 91.2%, with an evaporation rate of 1.67 kg m⁻² h⁻¹. The performance can be further enhanced by incorporating the nanoparticles into a polyvinyl alcohol hydrogel to make a composite film. In addition, utilizing the magnetic property of the core–shell particles allows the creation of surface texture in the film by applying an external magnetic field, which helps increase surface roughness and further boost the evaporation rate to as high as 2.25 kg m⁻² h⁻¹.     

Evaluation of registration methods on thoracic CT: the EMPIRE10 challenge

EMPIRE10 (Evaluation of Methods for Pulmonary Image REgistration 2010) is a public platform for fair and meaningful comparison of registration algorithms which are applied to a database of intrapatient thoracic CT image pairs. Evaluation of nonrigid registration techniques is a nontrivial task. This is compounded by the fact that researchers typically test only on their own data, which varies widely. For this reason, reliable assessment and comparison of different registration algorithms has been virtually impossible in the past. In this work we present the results of the launch phase of EMPIRE10, which comprised the comprehensive evaluation and comparison of 20 individual algorithms from leading academic and industrial research groups. All algorithms are applied to the same set of 30 thoracic CT pairs. Algorithm settings and parameters are chosen by researchers expert in the configuration of their own method and the evaluation is independent, using the same criteria for all participants. All results are published on the EMPIRE10 website (http://empire10.isi.uu.nl). The challenge remains ongoing and open to new participants. Full results from 24 algorithms have been published at the time of writing. This paper details the organization of the challenge, the data and evaluation methods and the outcome of the initial launch with 20 algorithms. The gain in knowledge and future work are discussed.     

Extraction and analysis of T waves in electrocardiograms during atrial flutter

Analysis of T waves in the ECG is an essential clinical tool for diagnosis, monitoring, and follow-up of patients with heart dysfunction. During atrial flutter, this analysis has been so far limited by the perturbation of flutter waves superimposed over the T wave. This paper presents a method based on missing data interpolation for eliminating flutter waves from the ECG during atrial flutter. To cope with the correlation between atrial and ventricular electrical activations, the CLEAN deconvolution algorithm was applied to reconstruct the spectrum of the atrial component of the ECG from signal segments corresponding to TQ intervals. The locations of these TQ intervals, where the atrial contribution is presumably dominant, were identified iteratively. The algorithm yields the extracted atrial and ventricular contributions to the ECG. Standard T-wave morphology parameters (T-wave amplitude, T peak-T end duration, QT interval) were measured. This technique was validated using synthetic signals, compared to average beat subtraction in a patient with a pacemaker, and tested on pseudo-orthogonal ECGs from patients in atrial flutter. Results demonstrated improvements in accuracy and robustness of T-wave analysis as compared to current clinical practice.     

Improving satellite services with cooperative communications

This paper proposes new transmission schemes for the delivery of satellite services. In the proposed scenarios, mobile terminals are allowed to forward the signal received from the satellite. This scheme provides spatial diversity just like MIMO transmission schemes. Moreover, the coverage area is extended because masked terminals have an additional opportunity to get the service from neighboring terminals. We use the paradigm of cooperative communications to compare the advantages and limitations of several scenarios in hybrid terrestrial/satellite systems. In particular, we study the following basic transmission scheme: in a first time slot, the satellite sends its signal and, in a second time slot, mobile terrestrial terminals are relaying the satellite signal. An analysis framework is proposed and applied to this cooperation scenario at the destination terminal. The framework is modeling the cooperation process and clearly separates the control part from the data user part. The paper outlines the importance of the control part by evaluating the relay selection policy on a basic hybrid satellite/ad hoc system. Copyright © 2011 John Wiley & Sons, Ltd.     

CATV fibre-optic supertrunking: A comparison of parameters and topologies using analog and/or digital techniques

Fibre-optic supertrunking has a well-established place in larger CATV networks. Supertrunks have to be transparent to the quality of the transmitted TV signals and they have to have a negligible impact on the system reliability of the total network. At least 60 dB (weighted) video SNR has to be achieved and down times of less than one hour per year per fibre are desirable. AM on fibre can achieve these goals only in shorter supertrunks. FM and digital modulation techniques with a higher loss budget than AM are well suited for high transmission quality as well as for redundant supertrunk topologies, achieving excellent system availability numbers at the expense of increased equipment complexity.