Scientific productivity paradox: The case of China's S&T system

Summary In 1985 China began the reform of its Science & Technology (S&T) sector inherited from the planned economy. To disclose the impact of the drawn-out reform on the efficiency of the whole sector, we measure the scientific productivity of China's S&T institutes. The analysis is based on R&D input and output data at the country aggregate and provincial level. We utilize Polynomial Distributed Lag model to uncover the structure of the lag between R&D input and output. The findings reveal that the growth rate of scientific productivity of China's S&T institutes has been negative since the 1990s.     

Distinguishing video quality through differential matrices

Multicast multi-layered communications must implement efficient control algorithms to address undesirable network behaviors. This paper proposes two multi-metric algorithms for computing the rates of the video layers and improve the global video quality of a multicast session. In fact, we show that a single-metric approach may degrade some network parameters without obtaining any substantial improvements. Our first algorithm combines three metrics and a set of weights in such a way that one metric can be prioritized. This leads to an improved quality of multicast sessions, as we show through a number of experiments. In networks where the available resources are highly variable, however, the stability of the video quality is compromised if absolute values of the metrics are adopted. We then propose a second algorithm that uses the relative values of the metrics on a per-entry basis. Computation of the global quality of the multicast session is based on a differential matrix that stores the metrics for each receiver. This scheme takes into account the dynamics of the available resources and the heterogeneity of receivers. The great benefit of this approach is that the global video quality is always improved for every loop of the algorithm.     

An experimental evaluation of cross-layer routing in a wireless mesh backbone

Over the latest few years, cross-layer design in wireless networks has drawn great attention from the research community. One of the main arguments in favor of such techniques is that the hop-count metric alone is not enough to capture the specificities of wireless links (e.g., interferences, collisions, fading). In this paper, we address a simple yet fundamental question: What are the real improvements that cross-layering can bring to routing performance when compared to the simple hop-count metric? In our experiments, we consider the backbone of a real wireless mesh network composed of 12 routers deployed in an office building. We focus on the stability of routes and their persistence. In spite of the nature of cross-layer metrics that take into account information from different layers, lets them be very reactive to changes, we observe that using these metrics, pairs of nodes tend to mainly use the same set of two or three routes between them.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.     

Low-cost deployment proposal to urban mobility in smart cities

Rational use of cars in smart cities can represent an economical and cheaper way to decrease the quantity of cars on the roads to better the life quality of the populations. This paper presents a low-cost deployment proposal called “URCa project” to reach these goals and proposes a paradigm change by sharing the cars considering some logistic aspects including car ride mechanism. Technical feasibility to deploy this solution was checked by means of a proof of concept. The concept was proven by passenger counting and license plate that are essential information in this solution were obtained taking photographs, applying two types of recognition algorithms and sending the results to be stored and evaluated by analytic data processes of a transit regulatory agency showing that this project is technically viable. The low-cost solution was justified by a financial analysis based on both costs (URCa solution and a bridge) that has shown a ratio of 1:10,000.

     

Effects of nisin concentration on properties of gelatin film-forming solutions and their films

The addition of nisin into a gelatin matrix can change properties of the film. The aim of this work was to develop gelatin-based films containing different nisin concentrations in order to study their influence on the film's antimicrobial and physical properties and their rheological properties as a film-forming solution (FFS). The FFS was characterised by rheological assays, and the gelatin-based active films were characterised and assessed by the effects of nisin concentrations on their various properties, including antimicrobial activity. Nisin's concentration affected not only its viscoelastic properties of FFS but also its film solubility in water, film surface roughness and light barrier. The addition of nisin also slightly modified the water contact angle and the mechanical properties of the gelatin films. Finally, the films demonstrated activity against Staphylococcus aureus and Listeria monocytogenes at concentrations above 56 mg of nisin g⁻¹ of gelatin.     

Design of frameworks for self-adaptive service-oriented applications: A systematic analysis

Self-adaptive service-oriented Applications (Self-Apps) must be able to understand themselves or the environment in which they are executed, and propose solutions to meet changing conditions. The development of these applications is not a trivial task, since it encompasses issues from different research areas. Despite the importance of frameworks for Self-Apps, there is a lack of comprehensive analysis of how the design of such applications is performed, and regarding the standardization of concepts and coverage of minimum requirements for Self-Apps. The main contribution of this article is to present this comprehensive analysis, providing the state of the art for this subject. This analysis was built through a Systematic Mapping Study, based on a total of 65 studies, from which we identify the main attributes for Quality of Service (QoS), search strategies, and service management strategies employed in the design of frameworks for Self-Apps. The main aspects of requirements involved in the design of Self-Apps were pointed out to stakeholders. For example, these applications must implement a method for evaluation of QoS based on metrics. We also put forward the S-Frame, a modular solution that brings together the main features for the design of Self-Apps, and describe the main challenges concerning these applications.     

Hydromorphological,hydraulic and ecological effects of restored wood: findings and reflections from an academic partnership approach

Large wood (re)introduction can deliver multiple benefits in river restoration, but there is a dearth of the detailed and longer‐term post‐project monitoring and evaluation required for improving best practice. We present findings from an academic partnership approach to post‐project evaluation, based on successive MSc research projects on restored large wood in the Loddon catchment, UK. Field and modelling data reveal: (i) key differences in large wood features between restored and natural reaches; (ii) increased hydraulic retention and changes to mesohabitats associated with large wood; (iii) differences in macroinvertebrate community composition around large wood but a lack of site‐level effects; (iv) interactions between macrophytes and large wood that may be specific to restored reaches; (v) a need for further field and modelling studies to inform the accurate representation of large wood in hydraulic models. Some key challenges in partnership working are identified to aid planning and effectiveness of future collaborations.     

Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment

Plasma electrolytic oxidation (PEO) is a technique that produces a hard oxide layer on the titanium surface where its properties can be tailored by changing the process parameters or by a posterior heat treatment (HT). In this work, a TiO₂ layer with different crystallinity was produced by PEO with different applied voltages (250 to 400 V) and post-HT at 600°C. Our aim was to evaluate the influence of the PEO voltage and HT on the mechanical and tribological properties of anodized Ti. There is an increase in pore size, oxide thickness, and Ca/P ratio for the oxide layer with the applied voltage during the PEO process. X-ray diffraction (XRD) results indicated an increase in the crystalline rutile phase in the oxide layer with voltage and HT. Nanoindentation shows an increase in the oxide hardness and elastic modulus with increased voltage and HT, leading to an improvement in the wear resistance.