Characterization of blasted austenitic stainless steel and its corrosion resistance

It is known that the corrosion resistance of stainless steel is deteriorated by blasting, but the reason for this deterioration is not clear. A blasted austenitic stainless steel plate (JIS-SUS304) has been characterized with comparison to the scraped and non-blasted specimens. The surface roughness of the blasted specimen is larger than that of materials finished with #180 paper. A martensite phase is formed in the surface layer of both blasted and scraped specimens. Compressive residual stress is generated in the blasted specimen and the maximum residual stress is formed at 50–100 μm from the surface. The corrosion potentials of the blasted specimen and subsequently solution treated specimen are lower than that of the non-blasted specimen. The passivation current densities of the blasted specimens are higher those of the non-blasted specimen. The blasted specimen and the subsequently solution treated specimen exhibit rust in 5% sodium chloride (NaCl) solution, while the non-blasted specimen and ground specimen do not rust in the solution. It is concluded that the deterioration of corrosion resistance of austenitic stainless steel through blasting is caused by the roughed morphology of the surface.     

Sulfur in chromia

The solubility of sulfur in chromia has been studied in H₂-H₂O-H₂S tagged with³⁵S at 973 and 1173 K at low oxygen and sulfur partial pressures typical for coal gasification-systems. For monocrystalline samples, it has been shown that sulfur-containing species are only present adsorbed on the surface of the specimens and can be removed by ultrasonic cleaning in acetone. The surface coverage after 4 weeks of exposure to H₂-H₂O-H₂S was between 2.8 and 19.3% of a monolayer. In polycrystalline chromia, sulfur was located only in pores and cracks of the sample. In dense, compact areas of the specimens the solubility of sulfur was below the detection limit of autoradiography, which was estimated to be better than 0.17 ppm.     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

Application of tight-binding electronic theory to phase stability and mechanical properties of intermetallic compounds

The phase stability and mechanical properties of ordered intermetallic compounds are investigated using the tight-binding (TB) electronic theory. The authors use the semiempirical TB method (for the lattice-relaxation calculations), as well as the first principles TB-LMTO approach based on the density-functional theory. The authors focus their attention on the strength anomaly in IVa-VIII intermetallic compounds with B2 structure. It has been shown experimentally that CoTi, CoZr, and CoHf display the positive temperature dependence of yield stress at intermediate temperatures while FeTi does not have their characteristics, depending on the position of the alloying elements in the periodic table. The observed strength anomaly operating at intermediate temperatures is discussed in conjunction with the relative phase stability of B2 structure with respect to B_f or B₁₉ phase and dislocation core structures.     

The inhibitive effect of extraneous ion addition on stress corrosion cracking of alpha-brass

The addition of ammonium chloride, cobalt sulphate, cesium sulphate and ethylene diamine to a Mattsson solution and the addition of ammonium sulphate to the Pugh solution have been found to produce an inhibitive effect on the stress corrosion cracking of alpha-brass in these solutions. Ammonium chloride and ammonium sulphate additions affect the tarnish formation on the specimen as well as the cracking pattern. Electrochemical polarization studies have also been carried out with these two additives. The observations have been explained in the light of adsorption of these ionic species at selected sites on the metal surface and their possible interference with the cathodic reactions.     

Macrosegregation in ESR and VAR Processes

The method of heat generation, heat transfer characteristics, and ingot structure are very different in the VAR and ESR processes, which result in different tendencies and mechanisms for macrosegregation formation in forged IN-718. Freckles are niobium rich and can be generated in both ESR and VAR, with higher incidence in ESR than VAR. White spots are niobium lean and can only be found in VAR-processed materials. Freckles are indige-nous in nature, and result from the flow of solute-rich interdendritic liquid in the mushy zone during solidification. The most plausible cause for white spots is exogenous material, which remains unmelted, falling into the molten pool. The best way to minimize the formation of freckles is to improve the ingot heat transfer rate, a more difficult task in ESR than in VAR.     

High cycle fatigue behaviour of Ti–6Al–4V alloy at elevated temperatures

High cycle fatigue behaviour of Ti–6Al–4V alloy was studied at 623 K and 723 K. Fatigue strength decreased at elevated temperatures compared with at ambient temperature. In the short life regime, fatigue strength was lower at 723 K than at 623 K, but in the long life regime it was nearly the same at both temperatures. At elevated temperatures, cracks were generated earlier at applied stresses below the fatigue limit at ambient temperature, indicating lowered crack initiation resistance. Small cracks grew faster at elevated temperatures than at ambient temperature, which became more noticeable with increasing temperature. After allowing for the elastic modulus, small cracks still grew faster at elevated temperatures.