Synthesis and evaluating of carbon nanoallotrope-biomacromolecule gel composites as drug delivery systems

This work was done to assess the role of precursors (agro and graphite) on performance of carbon nanoallotropes-biomacromolecules composite as drug delivery for controlling the release of niacin. In this respect graphene oxide and bagasse-based carbon oxide were synthesized and chelated with chitosan (Cs-GO and Cs-Co). These gel composites were characterized by many techniques [morphology, differential scanning calorimetry, Fourier-transform infrared spectroscopy, swelling, encapsulation efficiency (EE) and loading (L) % of niacin. Another series of experiments was carried out for studying the role of replacing part of carbon nanoallotrope by carboxymethyl cellulose (CMC) on performance of produced drug carries, these systems were coded as Cs-GO-CMC and Cs-Co-CMC. The data showed that, the Cs-GO gel composite provided maximum release of NA, at 5 h, for pH's simulated gastric and intestinal fluids; pH. 2.1 and pH 7.4 (1120 mg/L and 757 mg/L). The incorporation of CMC is not acceptable as it provided low drug release together with burst release of NA-drug, and consequently possible caused tissue irritation or toxicity in the human body. The Cs-GO and Cs-CO systems with relatively low drug loading were recommended for their better controllability system to NA release, which prolonging benefit of human with niacin. The NA release from all investigated gels followed Fickian and non-Fickian diffusion mechanisms.     

Preparation and characterization of high strength and high modulus PVA fiber via dry-wet spinning with cross-linking of boric acid

To improve the mechanical properties of polyvinyl alcohol (PVA) fibers, a series of PVA fibers were prepared via dry-wet spinning with cross-linking of boric acid (BA) (PVA/BA fibers), and using the mixed solvent of dimethyl sulfoxide and water. Moreover, the final PVA/BA fibers were characterized by Fourier transform infrared spectra (FTIR), scanning electron microscopy (SEM), differential scanning calorimetery (DSC), thermogravimetric analyzer (TGA), powder X-ray diffraction (XRD) and yarn strength tester. Furthermore, with the increasing of BA content, FTIR analysis showed that the degree of crosslinking of BA with PVA increased. SEM images of final PVA/BA fibers presented smooth surfaces, and the diameters decreased firstly and then increased. DSC, TGA, and XRD analysis indicated that the melting temperatures, thermal properties and crystallinities first increased and then decreased with the increasing of BA content. In addition, mechanical properties measurements illustrated that the cross-linking existed at an optimal BA content of 0.3 wt%, and PVA/BA-0.3 fiber had the highest tensile strength and Young's modulus of 13.1 ± 0.4 and 360.2 ± 10.4 cN/dtex, respectively.     

Group identification as a mediator of the effect of players’ anonymity on cheating in online games

This study aims to add to the discussion about the applicability of the classical deindividuation theory and social identity model of deindividuation effects (SIDE) in explaining online behaviours. It explores the effect of anonymity in facilitating social influence of group identity in online game cheating. A nationally representative survey was conducted face to face. Results from the survey administered in Singapore confirm predictions derived from the SIDE and challenge the classical deindividuation theory. Specifically, it was concluded that the frequency of gaming with online strangers (anonymous gaming) significantly predicted the frequency of cheating in online games. The effect of anonymity on game cheating was found to be significantly mediated by the group identification with online gaming communities/groups. Gender differences were found. Male gamers cheated more frequently than female gamers. Female gamers are more likely to cheat as a consequence of group identification than male gamers. Implications and future research are discussed.     

Ketamine effects on the urogenital system--changes in the urinary bladder and sperm motility

Different doses of ketamine (10 mg/kg, 20 mg/kg, 30 mg/kg, 40 mg/kg, 50 mg/kg, and 60 mg/kg) were injected i.p. (I.P.), respectively, to male ICR mice to determine the optimal dosage for chronic administration. At and above 40 mg/kg I.P. injection, mice had almost no hindlimb movement during swimming test. Subsequently, 30 mg/kg was used as the dose for the study in the toxicity of long-term ketamine administration on urinary bladder and sperm motility. The treatment group were subdivided into two (n = 10 each group); one received daily ketamine treatment i.p. for 3 months and another group for 6 months. Corresponding number of mice in control groups (n = 5 each group) received saline injection instead of ketamine. Terminal dUTP nick and labeling (TUNEL) study and Sirius red staining were carried out on the sectioned slides of the urinary bladders to study the degree of apoptosis in both epithelium and muscular layers of the urinary bladder and the relative thickness of the muscular layers in this organ was also computed. Apoptosis in the bladder epithelium was observed initially in the 3-month ketamine treated mice and the number of apoptotic cells was significantly different (P < 0.05) between the 3-month and 6-month ketamine treated mice and the control. The relative thickness of muscular layers in the bladder wall also decreased significantly (P < 0.05) when the 6-month treated mice and the control were compared. Sirius red staining revealed increase of collagen in the urinary bladder of the treated mice, most evidently 6 months after ketamine treatment. In addition, the sperm motility was studied and there was a statistically significant difference between the control and ketamine treated groups in the percentages of sperms which were motile (P < 0.05). This suggested that the chronic administration of ketamine affected the genital system as well.     

Mechanical behaviour of metal–matrix composite deposits

The electroplating technique is used for producing thin sheets of copper- or nickel-based composites containing different volume fractions of -alumina dispersions. The microhardness and tensile behaviour of such composites, in both the as-deposited and the annealed state, are characterized. The strengthening mechanism of electroplated composites is found to be a combination of Orowan-type strengthening and the Hall–Petch effect.     

An Investigation into Lubrication and Oxide Breakdown During Load-Carrying Capacity Testing

Changes occurring in the friction and wear mechanisms during a load-carrying capacity test, lubricated with cetane containing a carboxylic acid, were investigated. The changes in wear scar/track appearance and oxide coverage/composition were analyzed during every load stage.

The main conclusions were as follows:

• The breakdown in the protective oxide layer formed on the opposing steel surfaces was found to be the prerequisite for initiation of seizure.

• The seizure load achieved during load-carrying capacity testing quantifies the ability of the test fluid to prevent transition to the adhesive wear regime.

• The most severe surface damage was found to occur during the first few seconds after test initiation. Desorption of the adsorbed lubricant film and the subsequent removal of the naturally occurring thin oxide layer results in the initial period of adhesive wear.

• Partial recovery to a state of acceptable friction occurs after the period of initial seizure. During this period, the surface coverage by the adsorption lubricant molecules and the oxide coverage are sufficient to prevent severe adhesive wear from occurring. Wear is primarily a combination of oxidative, abrasive, and fatigue wear (all possible in the regions of mixed friction and boundary lubrication).

• Final lubricant breakdown and eventual seizure are initiated when the oxide removal rate exceeds the oxide formation rate resulting in severe adhesive wear followed by seizure.

     

Utilizing theory of mind for action selection applied in the domain of fighter pilot training

When developing intelligent agents, approaches that allow the anticipation of other agents is of utmost importance. For humans, this has also been shown to be crucial to establish good interactions. In this paper, a design for an agent that is equipped with theory of mind based reasoning capabilities is presented. The approach moves beyond the state of the art from several angles: first, it allows for the expression of certainties with respect to the predicted states of the other agents. Second, it allows the prediction during a substantial number of time steps in the future, thereby utilizing the theory of mind model multiple times. The approach has been applied to the domain of fighter pilots whereby intelligent opponents are developed to facilitate dedicated training for F16 fighter pilots.     

Nuclear Data Sheets for A = 211

The evaluated spectroscopic data are presented for 11 known nuclides of mass 211 (Hg, Tl, Pb, Bi, Po, At, Rn, Fr, Ra, Ac, Th). The ²¹¹Pa nuclide is included here but its identification remains uncertain. For ²¹¹Hg, ²¹¹Tl, ²¹¹Ac and ²¹¹Th nuclei, only the ground–state information is available. Their decay characteristics are mostly unknown. ²¹¹Fr is suggested to decay partially through ε decay mode, but its decay scheme remains poorly known. While high–spin excitations, including several isomers, are well studied in ²¹¹Pb, ²¹¹Bi, ²¹¹Po, ²¹¹At, ²¹¹Rn and ²¹¹Fr, the particle–transfer data are available for only ²¹¹Po and ²¹¹Bi.This evaluation was carried out as part of joint IAEA–ICTP workshop for Nuclear Structure and Decay Data, organized and hosted by the IAEA, Vienna and ICTP, Trieste, August 6–17, 2012. This work supersedes previous A=211 evaluation (2004Br45) published by E. Browne which covered literature before January 2003.     

Calcium dosing for the simultaneous control of biomass retention and the enhancement of fermentative biohydrogen production in an innovative fixed-film bioreactor

Biohydrogen (bioH₂) production via dark fermentation is an attractive approach to overcome the drawbacks of conventional hydrogen production methods and represents a preliminary alternative for the management of organic wastes. Fundamental studies are still required to enhance the performance of bioH₂ production systems, with emphasis on the development of novel reactor configurations. The anaerobic structured-bed reactor (ASTBR) is a recently developed configuration with great potential for bioH₂ production, although operating strategies are still required to minimize biomass washout in such systems. In this context, calcium dosing has been investigated as a strategy to enhance both biomass retention and bioH₂ production rates in the ASTBR. The present study employed varying COD/calcium ratios (4423, 2079, 1357, 1012, 884, and 632) in continuous experiments under mesophilic conditions (25 °C). Calcium dosing effectively enhanced biomass retention within the ASTBR, directly increasing the availability of metabolic energy for different metabolic pathways rather than cell synthesis. An optimal COD/calcium ratio of 1360 was mathematically estimated for bioH₂ production, which is consistent with the results obtained experimentally. The specific organic loading rate (SOLR) was better controlled at this ratio, indicating the establishment of balanced conditions in terms of substrate availability and biomass concentration. Conversely, bioH₂ production was severely impaired at COD/calcium values below and above the optimal range, most likely due to enhancement of the homoacetogenic pathway as a result of unbalanced conditions in the SOLR. Furthermore, biomass accumulation did not strongly affect the mean residence time of the ASTBR, facilitating its robust and enhanced solid retention.     

Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.