Synthesis and characterization of water-based poly(vinyl acetate-co-butyl acrylate) latexes containing oligomeric protective colloid

Poly(vinyl acetate-co-butyl acrylate) latexes having oligomeric N-methylol acrylamide were prepared by semi-continuous emulsion polymerization. The effects of new protective colloid and comonomer ratios on the physicochemical and colloidal properties of latexes were investigated. The changes in homopolymer and copolymer latexes were determined by measuring viscosity, particle size, molecular weight (MW), molecular weight distribution (MWD), and surface tension. [`(M)]<sub>n</sub> \bar{M}_{n} values of copolymer latexes were found to be lower than the MWs of the poly(vinyl acetate) and poly(butyl acrylate) homopolymers. In general, [`(M)]_n \bar{M}_{n} and [`(M)]_\textw \bar{M}_{\text{w}} values of copolymer latexes changed irregularly with increasing BuA ratio in the copolymer composition.     

Novel Esterification of Glycerol Catalysed by Tin Chloride (II): A Recyclable and Less Corrosive Process for Production of Bio-Additives

Abstract  

In this work, a novel process based on use of a SnCl₂·2H₂O catalyst which is less corrosive, inexpensive, and a water tolerant Lewis acid was employed for synthesis of fuel bio-additives from glycerol. High yields and selectivities were achieved for glycerol esterification with acetic acid under mild reaction conditions. The SnCl₂ catalyst showed to be as active as p-toluene sulfonic and sulfuric acid, catalysts commonly used in acid-catalysed esterification reactions. However, its use has significant advantages in comparison to these Br?nsted acid catalysts, including lower reactor corrosion and unnecessary neutralization at the end reaction. The SnCl₂ catalyst can also be recovered and reused without loss of catalytic activity. Additionally, effects of reaction temperature, HOAc:glycerol molar ratio and catalyst concentration on both selectivity and yield of glycerol acetates were also investigated. The lower corrosiveness, facilitated handling, as well as potential for reuse without activity loss after simple recycle protocols are positive aspects of SnCl₂ catalysts.     

The kinetic analysis of the thermal decomposition of kaolinite by DTG technique

The thermal decomposition of kaolinite was studied by differential thermogravimetry (DTG) technique under non-isothermal conditions. Samples of industrially treated (washed) kaolin with high content of the medium ordered kaolinite were calcined using a heating rate from 1 to 40 K min^− 1. The apparent activation energy and frequency factor for the dehydroxylation of kaolinite was evaluated by Kissinger method as 195 ± 2 kJ × mol^− 1 and (8.58 ± 0.33) × 10¹⁴ s^− 1, respectively. Avrami exponent of the process was estimated using Kissinger empirical kinetic models and Carne equation.     

Effect of itaconic acid on the wet scrub resistance of highly pigmented paints for architectural coatings

This study investigates the influence of carboxylic monomers, such as itaconic acid (IA), on the colloidal properties of the latexes made by semi-continuous emulsion copolymerization of styrene (STy) with n-butyl acrylate (BA). A number of copolymerization runs were carried out with different IA concentrations. The effect of functional monomer on the overall conversion, the colloidal properties of the latexes, and the distribution of the carboxylic groups (buried, particle surface and aqueous phase) were examined. The carboxylic groups present in the latexes were analyzed using conductimetric and potentiometric titrations. The behavior of the IA on the wet scrub resistance of highly pigmented paints for architectural coatings was examined and correlated with the distribution of the carboxylic groups. The results obtained showed that the properties of highly pigmented paints are greatly dependent on the amount and distribution of the carboxylic groups. The carboxylic acid distributed in the aqueous phase has a strong influence on the wet scrub resistance and on the characteristics of the final products.     

Phase Equilibrium Measurements of Sacha Inchi Oil (<Emphasis Type="Italic">Plukenetia volubilis</Emphasis>) and CO<Subscript>2</Subscript> at High Pressures

New data on phase equilibria for Sacha inchi seed oil in carbon dioxide have been measured using a variable volume cell phase equilibria system at temperatures of 303, 313 and 323 K and at pressures ranging from 4.3 to 27.7 MPa. The CO₂ mole fraction varied from 0.7488 to 0.9997. At the studied concentrations, phase transitions of vapor-liquid, liquid-liquid-vapor and liquid-liquid were observed. Sacha inchi oil contains 47% of omega-3 fatty acids, with a ratio of 0.76:1 for omega-6:omega-3, which is good for human health. The Peng-Robinson equation of state was used to describe the experimental data. A qualitative agreement was obtained between experimental and calculated data for the binary system CO₂ and Sacha inchi seed oil.     

Evaluation of corrosion inhibitors performance using real-time monitoring methods

The implementation of real-time corrosion-monitoring techniques can provide a reliable mechanism for detecting the overall effectiveness of chemical treatment programs and contribute to the selection and implementation of an adequate corrosion inhibitor system. Inadequate corrosion monitoring can result in an increase of both uniform and localized (pitting) corrosion activities which can lead to premature material failures. The present research was undertaken to ascertain whether linear polarization resistance (LPR), harmonic analysis (HA), and electrochemical noise (EN) in combination are suitable for the study of performance of corrosion inhibitors under a wide variety of conditions; for example, in the absence and the presence of hydrocarbons with or without the addition of corrosion inhibitors. The findings showed questionable results regarding the usefulness of the pitting factor derived from EN and HA data. In addition, statistical parameters were obtained, such as skew and kurtosis, and these results were compared with the pitting factor.     

Selective Hydrolysis of Arabinogalactan into Arabinose and Galactose Over Heterogeneous Catalysts

Abstract  

The application of solid acid catalysts for the production of monomers from hemicelluloses can be one of the key steps in developing the concept of an integrated forest biorefinery. Arabinogalactans (AG) are hemicelluloses which can be extracted on an industrial scale from larch wood species and has a great potential as a sustainable feedstock for bio-based products. Hydrolysis of AG to monomers over acidic heterogeneous catalysts (Smopex-101 and Amberlyst 15) was successfully demonstrated for the first time to selectively produce arabinose as the primary product, followed by the release of galactose without further degradation of the monomers.     

Phase and Rheological Behavior of Cetyldimethylbenzylammonium Salicylate (CDBAS) and Water

The temperature–composition phase diagram in the diluted region of the cationic surfactant cetyldimethylbenzylammonium salicylate/water system was studied with a battery of techniques. The Krafft temperature (T _k = 33 ± 1 °C) was measured by differential scanning calorimetry, polarizing microscopy, conductimetry, viscosimetry, and rheometry. The critical vesicle concentration (cvc, ~0.002 wt%) and a vesicle–micellar transition (cvm, ~0.005 wt%) was detected at a temperature of 35 °C. Below T _k and concentrations ≤2 wt%, a transparent solution is formed (I). Above 2–8.5 wt%, a lamellar (L₁) phase forms. At higher concentrations and up to 12 wt%, a second lamellar phase (L₂) is detected. From 12.4 to 15.5 wt%, an emulsion phase (E) is formed. Rheological dynamic measurements for the I phase indicate that the system exhibits a predominantly viscous behavior (G′ < G″) for concentrations lower than the overlap or entanglement concentration (C _e, ~0.75 wt%). At higher concentrations, wormlike micelles form and the elastic behavior predominates (G′ > G″). The elastic (G′) modulus collapses in a concentration–time master curve in the whole reduced frequencies range ωτ _c examined, whereas the viscous modulus (G″) collapses only at reduced frequencies lower than 0.1. Reduced stress plotted as a function of the reduced shear rate yields a good superposition of the curves at the different concentrations up to the onset of the non-linear behavior.     

Evaluation of emu oil extraction methods and their effects on physical and rheological behavior

In this study we evaluated the efficiency of six extraction methods for emu fat based on the quantification of yield, color, density, refraction index, and rheological behavior. Both physical methods (Bain Marie, rotary evaporator, fusion, ultrasound, and microwave) and chemical methods (solvents) were evaluated. Oil properties were compared with commercial emu oil as a reference. Solvent‐based extraction produced the greatest yield (72.8%). Among the physical methods, the greatest yield was produced by the ultrasound method (42.8%). In general, properties were similar to those reported for vegetable oils. The rotary evaporator method showed the greatest difference in total color (ΔE) in comparison with a commercially‐produced reference, while the fusion method showed the smallest ΔE. No statistically significant differences were found between the density and refraction index of the treated samples and those of the reference. Kinematic viscosity increased significantly in samples extracted via microwave method. All samples displayed pseudoplastic behavior. The data showed a good fit to the power law model (R² > 0.90). The consistency coefficient and flow behavior index were determined for all methods. Practical applications: Therapeutic applications for oil have been posited for emu oil. In pharmaceutical products, oils are used as emollients and as carriers for medicinal substances. The practical importance of an oil depends on its physical properties, thus a thorough understanding of those physical properties is very important for identifying potential applications. These properties are affected by the extraction method employed; the present paper evaluates the effects of a range of extraction methods on yield efficiency, as well as physical and rheological properties. Novel extraction methods such as ultrasound and microwave are also evaluated in this study.     

Synergistic action between Caryocar coriaceum Wittm. fixed oil with aminoglycosides in vitro

The oil obtained from the Caryocar coriaceum Wittm. (pequi) fruit pulp (C. coriaceum fixed oil – CCFO), rich in fatty acids, has been secularly employed by traditional medicine in the treatment of respiratory affections, skin inflammation, and wounds. These observations encouraged us to investigate the antimicrobial activity of CCFO and to investigate its effect in combination with aminoglycosides. The minimum inhibitory concentration (MIC) of CCFO alone and associated with aminoglycosides against Escherichia coli and Staphylococcus aureus strains were determined using microdilution assay. CCFO alone had a MIC of 512 µg/mL against E. coli and S. aureus resistant strains. Combining the CCFO with aminoglycosides reduced the MIC of aminoglycosides against the resistant strains of E. coli and S. aureus. The results obtained indicate that CCFO displays a significant synergistic antibiotic effect when combined with aminoglycosides, demonstrating that the oil constituents (fatty acids) may act as potentiators of the antibiotic activity of aminoglycosides. These properties make CCFO oil an interesting alternative as a remedy or nutraceutical against multiresistant bacteria, preventing the development of resistance by these microorganisms. Practical applications: This article demonstrates the capacity of the C. coriaceum oil to enhance the antibiotic activity of aminoglycosides. This activity could represent a new way to combat the growing bacterial resistance to antibiotics, an important problem of public health.