The effect of compressive loading on proteoglycan turnover in cultured fetal tendon

A fibrocartilaginous tissue develops in tendon at the point where the tendon wraps under bone and is subjected to transverse compressive loading in addition to tension. This tissue is characterized by a high level of large proteoglycan (aggrecan), which could accumulate because of increased synthesis, diminished turnover, or both. To examine the effect of loading on proteoglycan turnover segments of fetal tendon in sterile culture were subjected to cyclic, uniaxial compression loading to 30% of initial thickness once every 6 sec. for 72 h, and then allowed to incorporate 35S-sulfate for 12 h. The rate of loss of newly-synthesized 35S-proteoglycans from tissue was determined during subsequent culture for up to 12 days, with or without continued loading. Proteoglycan was lost from fetal tendon segments rapidly during the first 3 days of culture and slowly thereafter. Loss of newly-synthesized proteoglycan from adult tendon fibrocartilage was linear, with a half life of 12 d. Segments of fetal tendon subjected to cyclic compression before labeling synthesized more proteoglycan. These segments lost a greater percent of labeled proteoglycan to medium during a subsequent 12-day culture period than matched segments that had not experienced loading. Analysis of medium and tissue proteoglycans by SDS polyacrylamide gel electrophoresis and sieve chromatography indicated that small proteoglycans (decorin and biglycan) were retained in both loaded and non-loaded tissue whereas large proteoglycans (migrating in the Vo of a Sepharose CL-4B column) were readily lost. It is concluded that the 3-day loading regimen did not diminish turnover of large proteoglycan. To the contrary, although synthesis of large proteoglycan was enhanced by the loading regimen, these proteoglycans were still rapidly lost from the fetal tissue.     

High-dose busulfan, melphalan, thiotepa and peripheral blood stem cell infusion for the treatment of metastatic breast cancer

The purpose of this study was to determine the outcome of patients with metastatic breast cancer treated with high-dose busulfan (Bu), melphalan (Mel) and thiotepa (TT) followed by peripheral blood stem cell (PBSC) infusion. Fifty-one patients with chemotherapy refractory (n = 32) or responsive (n = 19) metastatic breast cancer received Bu (12 mg/kg), Mel (100 mg/m2) and TT (500 mg/m2) followed by PBSC collected after chemotherapy and growth factor (n = 43) or growth factor alone (n = 8). The 100 day treatment-related mortality was 8% including one death from cytomegalovirus pneumonia, one from aspiration pneumonia and two from regimen-related toxicity (RRT). Seven of 28 refractory (25%) and 5/7 (71%) responsive patients with evaluable disease achieved a complete response of all measurable disease or all soft tissue disease with at least improvement in bone lesions (PR*). Fifteen of 51 patients (29%) are alive and progression-free a median of 423 days (range 353-934) after treatment, 5/32 (16%) with refractory disease and 10/19 (53%) with responsive disease. The probabilities of progression-free survival (PFS) at 1.5 years for the patients with refractory (n = 32) and responsive (n = 19) disease were 0.24 and 0.53, respectively. These preliminary data suggest that high-dose Bu/Mel/TT has significant activity in patients with advanced breast cancer and may be superior to some previously published regimens.     

Vapor-phase viscosity of phenol

New measurements of the vapor-phase viscosity of phenol were performed from 437 up to 624 K and for densities between 0.006 and 0.023 mol · L^–1 in an all-quartz oscillating-disk viscometer with small gaps. Thus, including our own measurements reported earlier, experimental data are available in the temperature range between 376 and 639 K and in the density range from 0.001 up to 0.023 mol · L^–1. The data were evaluated with a density series for the viscosity in which only a linear density contribution is included. The values of the second viscosity virial coefficient obtained for phenol as well as for benzene, toluene, and p-xylene were compared with results of the Rainwater-Friend theory and of the modified Enskog theory on the basis of the Lennard-Jones 12-6 potential. The agreement is reasonable, when the potential parameter ratios determined by Bich and Vogel are used. The influence of bound dimers seems to be already taken into account in the three-monomer contribution according to Hoffman and Curtiss.Paper dedicated to Professor Joseph Kestin.     

Chemical and nutritional evaluation of two amaranth (Amaranthus cruentus)-based infant formulas

The objective of this study was to calculate, prepare and evaluate the Protein Efficiency Ratio (P.E.R.) and Net Protein Utilization (N.P.U.) of two infant formulas made with amaranth (Amaranthus cruentus). Both formulas were formulated to match a previously developed and tested soy-oats infant formula. No significant differences were found between the three formulas with respect to corrected Protein Efficiency Ratio (P.E.R.) and Net Protein Utilization (N.P.U.) values. Only the product made with the 1-R fraction of amaranth was found to have a significantly lower P.E.R. than casein.     

A new route for mass production of uniform metal nanoparticles in water by means of laser light induced processes

In this contribution, we report a new route for mass fabrication of metal nanoparticles with monodisperse shape and narrow size distribution in water applying exclusively physical processes. For this purpose, we have combined pulsed laser ablation with the technique of selective laser tailoring. For example, pulsed laser ablation from a gold plate in water results in a large amount of nanoparticles with radii in the range of R = 75 nm with a relatively broad size distribution of sigma = 31%. This broad size distribution has been subsequently narrowed in a single irradiation step to sigma = 20% without a significant change of the mean nanoparticle radius utilizing selective laser tailoring. The main advantage of the laser based process, besides rapid processing, is that no chemicals, which are undesired for many applications, are necessary. Hence, mass production of nanoparticles with narrow size and monodisperse shape distribution in water becomes feasible.     

Comparison of pressure and heat resistance of Clostridium botulinum and other endospores in mashed carrots

Inactivation of bacterial endospores in food requires a combination of pressure and moderate heat. Endospore resistance of seven Clostridium botulinum strains was compared with those of Bacillus spp. (B. cereus, B. subtilis, B. licheniformis, B. smithii, B. amyloliquefaciens) and Thermoanaerobacterium thermosaccharolyticum with respect to pressure (600 to 800 MPa) and temperature (80 to 116 degrees C) treatments in mashed carrots. A large variation was observed in the pressure resistance of C. botulinum spores. Their reduction after treatments with 600 MPa at 80 degrees C for 1 s ranged from more than 5.5 log units to no reduction. Spores of the proteolytic C. botulinum TMW 2.357 exhibited a greater resistance to pressure than spores from all other bacteria examined, with the exception of B. amyloliquefaciens. Heat resistance of spores did not correlate with pressure resistance, either within strains of C. botulinum or when C. botulinum spores were compared with spores of T. thermosaccharolyticum. A quantitative release of dipicolinic acid was observed from C. botulinum spores on combined pressure and temperature treatments only after inactivation of more than 99.999% of the spores. Thus, dipicolinic acid is released by a physicochemical rather than a physiological process. The resistance of spores to combined pressure and temperature treatments correlated with their ability to retain dipicolinic acid. B. amyloliquefaciens, a mesophilic organism that forms highly pressure-resistant spores is proposed as a nonpathogenic target organism for high-pressure process development.