Ultra-Violet Radiation-Cured Biofiber Composites from Kenaf: The Effect of Montmorillonite on the Flexural and Impact Properties

Abstract

Biofiber composites, cured by ultra-violet (UV) radiation were produced using kenaf fibers as the reinforcing agent and unsaturated polyester as the matrix. This research work focused on the effects of the incorporation of kenaf fiber, montmorillonite (MMT), and cetyl trimethyl ammonium bromide-modified MMT (CTAB-MMT) in the unsaturated polyester composite. Overall, the incorporation of kenaf fibers in the form of mat had improved the flexural and impact properties of the composites. Addition of MMT into the kenaf fiber-polyester system showed an improvement up to 1% MMT after which it decreased. The increase was attributed to better stress transfer mechanism in the matrix. However, further increase in the MMT loading had resulted in the decrease in the properties, which was believed to be due to agglomeration. Modification of MMT with CTAB had produced composites with higher flexural and impact properties as compared to those without modification. This was attributed to a combination of effective dispersion of MMT in the matrix, availability of effective high aspect ratio MMT, and enhanced compatibility between CTAB-MMT with the matrix.     

Polypropylene Hybrid Composites: A Preliminary Study on the use of Glass and Coconut Fiber as Reinforcements in Polypropylene Composites

Polypropylene hybrid composites were made using coconut and glass fibers as reinforcing agents in the polypropylene matrix. The incorporation of both fibers into the PP matrix has resulted in the reduction of flex-ural, tensile, and impact strengths and elongation at break. The reduction has been attributed to the increased incompatibility between the fibers and the PP matrix, and the irregularity in fiber size, especially for biofibers as shown by scanning electron micrographs. Both the flexural and tensile moduli have been improved with the increasing level of fiber loading. Most of the properties tested for Composites with high glass fibers/low biofiber loading are comparable with the ones with low glass fiber/high biofiber loading. The results show that more biofibers could be incorporated in hybrid composites which would give the same range of properties as the composites with higher loading of glass fibers.     

Tensile deformation behaviour of a dissimilar metal weldment of P91 and 347H steels

Deformation of a weldment is governed by the mechanical properties of its base metals and fusion zone. In a weldment, the base metals and fusion zone exhibit changing microstructural features with various phases present along the weldment. Specifically, the heat affected zone of a base metal exhibits a heterogeneous microstructure generated during weld thermal cycles and by post-weld heat treatment. As a result, the mechanical properties in a weldment are often non-uniformly distributed. In this study, tensile tests combined with digital image correlation were performed to obtain the non-uniform distributions of the mechanical properties of a weldment composed of P91 and 347H steels. From the experimental tensile tests, it was found that the 347H base metal had significantly distinct mechanical properties compared to the other zones of the weldment. Furthermore, the 347H base metal had the lowest yield stress but the highest strain hardening exponent. Because of its lowest yield stress, the 347H base metal had the highest plastic strain accumulation at any stage of global deformation. However, the strain hardening rate of the P91 base metal enabled it to accumulate the necessary plastic strain to activate its necking first. Therefore, the failure location of the P91-347H weldment was expected to occur at the P91 base metal. A 3D finite element simulation of the tensile deformation of P91-347H weldment also suggested the same. However, from the present experimental observations, one weldment out of three was found to fail unexpectedly at the heat affected zone of the P91 base metal. The reason for this unexpected failure was determined by microscopic analysis to be the presence of a large defect.     

Rubberwood–high-density polyethylene composites: Effect of filler size and coupling agents on mechanical properties

Composites were made from rubberwood in the form of fibers (RWF) and powder (RWP) and high-density polyethylene (HDPE). The RWP–HDPE composites showed higher tensile strength than those of the fibers. The inferior properties of the RWF-filled composites were believed to be attributed to the agglomeration of the fibers. Two types of coupling agents, that is, 3-(trimethoxysilyl)propyl methacrylate (TPM) and 3-aminopropyltriethoxysilane (APE), were employed in an attempt to improve the mechanical properties of the composites. The former was able to significantly improve the modulus of elasticity (MOE) and impact strength of the RWF-filled composites. Treatment with TPM resulted in the reduction of the tensile modulus and increase in the elongation at break (EB) for both RWF and RWP-filled composites. APE produced RWP-filled composites with a higher tensile strength and modulus. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1993–2004, 1998     

Knowledge discovery with classification rules in a cardiovascular dataset

In this paper we study an evolutionary machine learning approach to data mining and knowledge discovery based on the induction of classification rules. A method for automatic rules induction called AREX using evolutionary induction of decision trees and automatic programming is introduced. The proposed algorithm is applied to a cardiovascular dataset consisting of different groups of attributes which should possibly reveal the presence of some specific cardiovascular problems in young patients. A case study is presented that shows the use of AREX for the classification of patients and for discovering possible new medical knowledge from the dataset. The defined knowledge discovery loop comprises a medical expert's assessment of induced rules to drive the evolution of rule sets towards more appropriate solutions. The final result is the discovery of a possible new medical knowledge in the field of pediatric cardiology.     

Radiative heat transfer in polyethylene

Analytic and experimental estimates are made of the contribution of photon heat conduction to the total heat transfer in polymers.     

Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler

Kenaf/unsaturated polyester composites filled with montmorillonite (MMT) filler were produced. Overall, the study showed that, for samples with kenaf filler only, the strength properties decreased as the kenaf filler loading was increased from 40 to 60%. The increase in the kenaf filler loading reduced the amount of matrix material. This subsequently lowered the ability of the sample to absorb energy or distribute stress efficiently. However, with MMT, the tensile properties improved because of the high aspect ratio and surface area of the MMT. The study of the effect of kenaf filler size on the tensile properties showed that the samples with the smallest size (74 μm) displayed the lowest tensile properties compared to the larger ones. This was attributed to the agglomeration of the kenaf fillers. The addition of MMT resulted in an overall increase in the tensile strength of the composites compared to those without MMT. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

High incidence of chronic graft versus host disease after allogeneic peripheral blood progenitor cell transplantation. The Spanish Group of Allo-PBPCT

BACKGROUND AND OBJECTIVE: The incidence of acute GVHD (aGVHD) in allogeneic peripheral blood progenitor cell transplantation (allo-PBPCT) seems to be similar to that seen in allogeneic bone marrow transplantation (allo-BMT). In contrast, some preliminary results suggest that the incidence of chronic GVHD (cGVHD) might be higher. The aim of the present study was to analyze the actuarial probability of developing cGVHD in allo-PBPCT, its clinical manifestations and response to treatment. METHODS: We have retrospectively analyzed clinical results from 21 allo-PBPCT recipients that had been transplanted at least 18 months before this study and that fulfilled the following criteria: HLA identical sibling donor, non T-cell depleted apheresis and more than 90 days of survival with sustained engraftment. The median follow-up was 12 months (range 4.5-22). RESULTS: Twelve out of the 21 (57%) patients presented cGVHD, 1 limited and 11 extensive. The actuarial probability of cGVHD was 72.7% (95% CI, 49-96%). The median interval from transplant to onset was 180 days (range 95-270). Nine of the 12 cases (75%) presented combined skin and liver involvement. Of the other three, the liver was involved in one case; skin, mouth, and nail cGVHD was observed in another case; and skin and mouth involvement together with an obstructive pulmonary disease was observed in the remaining case. Under therapy, a complete resolution of cGVHD manifestations was achieved in five cases, and a partial improvement was attained in three other cases. In two responsive patients, cGVHD reappeared after stopping treatment. Four patients were refractory to the treatment. INTERPRETATION AND CONCLUSIONS: It would appear from this retrospective and multicenter study that, after a median follow-up of 12 months, cGVHD after allo-PBPCT could be more frequent than after allo-BMT. A randomized trial with a large number of patients and a sufficient follow-up will be necessary to answer this question definitively.     

Simultaneous occurrence of B-cell chronic lymphocytic leukemia and chronic myeloid leukemia with further evolution to lymphoid blast crisis

The coexistence of chronic myeloid leukemia (CML) and B-cell chronic lymphocytic leukemia (CLL) in the same patient is rare. A 71-year-old woman developed a B-lineage lymphoid blast crisis at 18 months after diagnosis of Ph-positive CML. At this time, a lymphoid cell population with morphologic and immunophenotypic features of CLL was demonstrated. The retrospective review of the tests performed at diagnosis and thereafter disclosed the presence of lymphoid nodules in the initial bone marrow biopsy in the absence of lymphocytosis. Subsequently, there was an appearance of moderate lymphocytosis in the following months. Therefore, diagnosis of CML and coexistent CLL was established. Although a transient remission of blast crisis was achieved, blast cells reappeared two months later and the patient died shortly afterwards. Molecular studies of the immunoglobulin heavy chain gene (IH) rearrangement pattern point to the origin of the diseases in two different cell clones. In addition, previously published cases of simultaneous CLL and CML are reviewed.