Biodegradable lignin as a reactive raw material in UV curable systems

ABSTRACT

Radiation curing technologies, including ultraviolet (UV) and electron beam curing, have received increasing attention especially after the increasing concerns on energy consumption, environmental protection, and occupational health and safety. Ultraviolet (UV)-curable polymerization are progressively being utilized in numerous manufacturing since they can be speedily applied in addition to their outstanding physical properties such as excellent surface quality, productivity, and slow energy consuming.This paper briefly reviews the research milestones in the area of wood chemical modification, focusing on the basic principles and applications of UV curable systems and polymerization. The study also extends to highlight the effect of lignin incorporation into UV curable system on coating quality, thermal stability, chemical resistance and mechanical properties.     

Mechanical properties of polypropylene composite reinforced with oil palm empty fruit bunch pulp

In this study, oil palm empty fruit bunch (EFB) pulp was used as reinforcing agent in polypropylene composite. EFB pulp was prepared using soda pulping with different concentrations of sodium hydroxide (NaOH) solution. Overall, the tensile and flexural properties specifically the strength and the toughness showed improvement as the NaOH content in the treatment was increased. This was attributed to lower probability for EFB pulp to agglomerate and the production of higher aspect ratio pulp fibers. Scanning electron microscopy analysis showed evidence of the reduction in EFB bundles diameter after NaOH treatment. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Photo‐fabricated unsaturated polyester resin composites reinforced by kenaf fibers,synthesis and characterization

New bio‐fiber composites (UPRC) cured by ultraviolet radiation were produced using kenaf fiber as reinforcing agent and unsaturated polyester resins as matrix in the presence of styrene and IRGACURE 1800 as photoinitiator. Unsaturated polyester resins based on palm oil were prepared from various ratios of monoglyceride (MG)/maleic anhydride (MA) by the interaction of the corresponding MG monomer, with different equivalents of MA, in the presence of 2‐methylimidazole as catalyst. The various characteristics of the obtained bio‐fiber composites, including mechanical, gel content, water absorption and thickness swelling test, thermal analysis, were determined and the data were discussed. Bio‐fiber composite with MG: MA ratio (1 : 4 eq./eq.) showed better mechanical properties (tensile, flexural, and impact strength) than other formulations. Gel content increased as the amount of MA was increased up to the MG: MA ratio was 1 : 4 (eq./eq.) then slightly decreased at the higher ratio formulation. Bio‐fiber composite (UPRC_c) was considered the best prepared bio‐fiber composite which contained higher degree double bond, cross‐linking and thermal stability. Moreover, morphological study of selected examples of the formed bio‐fiber composites was also carried out and showed the evidence of the enhancement of the compatibility between fiber and polymer matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The impact of a new emotional self-management program on stress, emotions, heart rate variability, DHEA and cortisol

In an attempt to develop an assay for the susceptibility of plasma lipids to oxidation, we have studied the kinetics of copper-induced oxidation in diluted serum and plasma prepared with different anticoagulants (heparin, citrate and EDTA) by monitoring the absorbance of oxidation-products at several wavelengths. These studies revealed the complex and interrelated effects of the water-soluble antioxidant ascorbic acid, citrate and chloride ions on the kinetics of copper-induced oxidation of plasma lipids. Specifically, the onset of oxidation induced by copper-citrate chelates is only slightly affected by chloride ions and is accelerated upon increasing the copper concentration. By contrast, in the absence of citrate, the lag preceding oxidation in diluted serum or plasma (but not the maximal rate of oxidation) depends markedly on the chloride concentration in the diluting medium. In the absence of Cl-, the lag preceding oxidation is a decreasing saturable function of copper concentration, whereas in a normal phosphate-buffered saline solution (PBS), the lag shows a biphasic dependence on copper concentration such that at copper concentrations above 10-30 microM (depending on the extent of plasma dilution), increasing the concentration of copper results in prolongation of the lag. This dependence of copper-induced oxidation on the concentration of copper is not observed for dialyzed serum unless ascorbic acid is added. Our interpretation of these results is that water-soluble reductants and chloride ions act synergistically to stabilize Cu+, on the expense of Cu2+. Quenching of free radicals by Cu+ may be responsible for the prolongation of the lag at high copper concentrations, with no reduction of the maximal rate of oxidation. In spite of the complex dependencies described above, spectrophotometric monitoring of the kinetics of oxidation of plasma lipids, under 'optimized conditions' (50-fold diluted serum, in PBS containing 720 microM sodium citrate and 100 microM copper), agrees with independent measurements of the consumption of polyunsaturated fatty acids. Hence, the spectroscopic method may become useful for evaluation of the susceptibility of plasma lipids to oxidation. This possibility, however, has yet to be elucidated through investigations of the correlation between the susceptibility of serum lipids to copper-induced oxidation in vitro and clinical factors of significance.     

Renal failure in multiple myeloma: presenting features and predictors of outcome in 94 patients from a single institution

BACKGROUND: Twenty percent of patients with multiple myeloma (MM) have renal failure. OBJECTIVE: To analyze the presenting features, the response to therapy, and the factors associated with renal function recovery and survival in 94 patients with MM and renal failure. PATIENTS AND METHODS: Medical records of patients from our institution with MM and renal failure diagnosed between January 1969 and December 1994 were reviewed. The statistical methods consisted of Kaplan-Meier survival curves, the log-rank test, logistic regression analysis, and the Cox proportional hazards model for survival analysis. RESULTS: Renal failure was observed in 94 (22.2%) of 423 patients. Patients with renal failure had more advanced disease than the others. Patients with renal failure had a lower response rate to chemotherapy than those with normal renal function (39% vs 56%; P<.001). However, when patients dying within the first 2 months of treatment were excluded, no significant differences in the response rate were found between patients with renal failure and those with normal renal function. Renal function recovery was observed in 26% of patients. Serum creatinine level (<354 micromol/L [<4 mg/dL]), serum calcium level (> or =2.88 mmol/L [> or = 11.5 mg/dL]), and amount of proteinuria (< 1 g/24 h) were associated with renal function recovery. Patients who recovered renal function had a median survival of 28 months vs 4 months for those with nonreversible renal failure (P<.001). In the multivariate analysis, only serum creatinine level (P=.003) and response to chemotherapy (P<.001) were correlated with survival. CONCLUSIONS: Renal failure was present in almost one fourth of patients with MM. Patients with reversible renal failure had longer survival than those not recovering renal function. When patients dying within the first 2 months of treatment were excluded, the response rate was not affected by renal function. Factors associated with renal function recovery were degree of renal failure, presence of hypercalcemia, and amount of proteinuria. Response to chemotherapy and severity of renal failure were the only independent factors associated with survival.     

Rice husk–polyester composites: The effect of chemical modification of rice husk on the mechanical and dimensional stability properties

Rice husk was used as filler in the production of rice husk (RH)–polyester composites and was subjected to three types of chemical modification. The chemical reagents employed in this study were glycidyl methacrylate (GMA), maleic anhydride (MAH), and succinic anhydride (SAH). This study revealed that the chemical modification of RH with GMA and MAH resulted in the enhancements of tensile and flexural properties of RH–polyester composites. The reduction in these properties with respect to those modified with SAH were attributed to the absence of C?C unsaturated groups. Water immersion test showed that chemical modification of the RH improved the dimensional stability of the composites. This was shown in the GMA‐ and MAH‐modified RH–polyester composites. The modification increased the hydrophobicity as well as the crosslinking between the RH and matrix in the composites. The lower performance demonstrated by the SAH‐modified composites was due to the inability of the SAH to form crosslinking with the matrix. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1237–1247, 2005     

Maintenance treatment with interferon alpha-2b in multiple myeloma: a prospective randomized study from PETHEMA (Program for the Study and Treatment of Hematological Malignancies, Spanish Society of Hematology)

The objectives of the present study were to investigate whether interferon alpha (IFN) maintenance could prolong response duration and survival in patients with multiple myeloma (MM) in objective response and to analyze the characteristics of relapse and subsequent survival. From January 1991 to November 1994, 92 patients from the Spanish Cooperative Group PETHEMA with MM in objective response after 12 courses of VCMP/VBAP chemotherapy were randomized to receive IFN maintenance vs no treatment until relapse. Prognostic factors at diagnosis were similar in both groups. IFN was administered at a starting dose of 3 mU/m2 three times per week. The IFN toxicity was moderate with granulocytopenia and fatigue being the most common adverse effects. Median duration of response from randomization until relapse was 13 months in the IFN group vs 7.7 months in the no treatment arm (P = 0.042). Median survival from randomization was 38.8 months for patients given IFN vs 32.7 months for those allocated to the no treatment arm (P = 0.12). Features at relapse were similar in patients who received IFN maintenance and in those assigned to no treatment. Finally, survival from relapse was identical in both groups. In summary, our results show a significant prolongation of response in patients maintained with IFN with no significant influence on survival. In addition, in our series features at relapse and subsequent outcome were similar in both groups.     

The effect of rat anterior cingulate inactivation on cognitive flexibility.

The present experiment investigated the effects of muscimol injections into the rat dorsal anterior cingulate on the acquisition and reversal learning of a 4-choice odor discrimination. Long-Evans rats were trained to dig in cups that contained distinct odors. In the odor discrimination, one odor cup contained a cereal reinforcement in acquisition whereas a different odor cup contained a cereal reinforcement in reversal learning. The other 2 odor cups were never associated with reinforcement. Bilateral infusions of the gamma aminobutyric acid-A agonist muscimol did not impair acquisition of the odor discrimination but impaired reversal learning in a dose-dependent manner. During reversal learning, dorsal anterior cingulate inactivation did not lead to perseveration but selectively increased errors to the odor cups that were never reinforced. These findings suggest that the dorsal anterior cingulate supports learning when conditions require a shift in choice patterns and may enhance cognitive flexibility by decreasing interference of irrelevant stimuli. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improvements of fiberboard properties through fiber activation and subsequent copolymerization with vinyl monomer

High-temperature refined thermomechanical pulp (MDF fiber) was dried, extracted with neutral organic solvent, and reacted with three types of electrophilic reagents (glycidyl methacrylate, maleic anhydride, and succinic anhydride). The adducts formed were further reacted in a hot press with a vinyl monomer in the presence of a free-radical initiator (benzoyl peroxide). Well-conformed boards were produced by the process. Modified boards showed significant improvement in thickness swelling as well as in strength properties compared to control phenol–formaldehyde boards. Glycidyl methacrylate modified/methyl methacrylate boards were the most stable toward the wet-and dry-exposure cycles, whereas succinic anhydride/methyl methacrylate boards showed the lowest water absorption. © 1994 John Wiley & Sons, Inc.