Beam Waveguide Reflector with Integrated Direction-Finding Antenna for In-Situ Alignment

An in-situ alignment system for beam waveguides based on an interferometric direction-finding antenna was investigated numerically and experimentally. The system consists of a reflector with four off-central positioned waveguide couplers in two directions. By nulling the difference of the power signals as well as the mixing signal from each coupler pair, spatial and angular alignments of a beam impinging on the mirror can be performed. In this paper, the characteristics of such a mirror are presented, and the design of a prototype intended for use in an ECH transmission line at LHD is described. Low-power as well as high-power tests at a frequency of 82.7 GHz were carried out, and the results are discussed. The device shows a high performance in agreement with theory.     

High-performance surface-micromachined inchworm actuator

This work demonstrates a polycrystalline silicon surface-micromachined inchworm actuator that exhibits high-performance characteristics such as large force (/spl plusmn/0.5 millinewtons), large velocity range (0 to /spl plusmn/4.4 mm/sec), large displacement range (/spl plusmn/100 microns), small step size (/spl plusmn/10, /spl plusmn/40 or /spl plusmn/100 nanometers), low power consumption (nanojoules per cycle), continuous bidirectional operation and relatively small area (600 /spl times/ 200/spl mu/m/sup 2/). An in situ load spring calibrated on a logarithmic scale from micronewtons to millinewtons, optical microscopy and Michelson interferometry are used to characterize its performance. The actuator consists of a force-amplifying plate that spans two voltage-controlled clamps, and walking is achieved by appropriately sequencing signals to these three components. In the clamps, normal force is borne by equipotential rubbing counterfaces, enabling friction to be measured against load. Using different monolayer coatings, we show that the static coefficient of friction can be changed from 0.14 to 1.04, and that it is load-independent over a broad range. We further find that the static coefficient of friction does not accurately predict the force generated by the actuator and attribute this to nanometer-scale presliding tangential deflections.     

Reliability of nonhermetic bias-free LiNbO/sub 3/ modulators

Reliability for nonhermetic bias-free LiNbO/sub 3/ optical modulators is estimated from aging data in both dry and damp heat conditions. The two dominant failure modes for these devices are: 1) device performance degradation due to temperature-activated drift of the annealed proton-exchange waveguide; and 2) optical insertion loss increase due to humidity-induced deterioration of glued fiber joints. A total failure rate of 30 failures in time (FITs) is predicted for 20 years operation at 45/spl deg/C and moderate humidity conditions (40% RH). This estimate based on laboratory-test data is consistent with a field failure rate <5 FITs observed in fielded devices.     

Manipulation of microenvironment with a built-in electrochemical actuator in proximity of a dissolved oxygen microsensor

Biochemical sensors for continuous monitoring require dependable periodic self diagnosis with acceptable simplicity to check its functionality during operation. An in-situ self-diagnostic technique for a dissolved oxygen microsensor is proposed in an effort to devise an intelligent microsensor system with an integrated electrochemical actuation electrode. With a built-in platinum microelectrode that surrounds the microsensor, two kinds of microenvironments, called the oxygen-saturated or oxygen-depleted phases, can be created by water electrolysis, depending on the polarity. The functionality of the microsensor can be checked during these microenvironment phases. The polarographic oxygen microsensor is fabricated on a flexible polyimide substrate (Kapton) and the feasibility of the proposed concept is demonstrated in a physiological solution. The sensor responds properly during the oxygen-generating and oxygen-depleting phases. The use of these microenvironments for in-situ self-calibration is discussed to achieve functional integration, as well as structural integration, of the microsensor system.     

Properties of feedback solitons in a single-mirror experiment

We report on the observation of localized states (LSs) in a single-mirror feedback system using sodium vapor as the nonlinear medium. By combining experimental results with simulations based on a microscopic model and with results of a linear stability analysis of the homogeneous state, we discuss the properties of the LSs, the mechanism of their formation, their domain of existence in parameter space, their interaction with the amplitude and phase gradient in the Gaussian beam of the driving laser, and the formation of "molecules" and "clusters" of LSs. We elucidate the dominant role of diffraction in the interaction of the LSs and discuss relations between the clusters of LSs and extended patterns.     

Modeling Temperature in Coupled Electrical and Thermal Simulations of the Electroconsolidation® Process

Electroconsolidation® is a process for densifying complex-shaped parts by using electrically conductive particulate solids as a pressure-transmitting medium. The part is immersed in a bed of the particulate medium contained in a die chamber. Sintering temperature is achieved by resistive heating of the medium while applying compaction pressure. The process is capable of ultrahigh temperatures and short cycle times and offers the potential for low processing costs.

Control of the process and selection of process conditions require knowledge of the temperatures within the die. Temperature gradients exist because of the high heating rate and because of variations of density and electrical resistivity of the medium due to the presence of the part. Direct measurement of temperature with thermocouples or other conventional means is impractical because of the high temperatures, high currents, and high pressures that are involved. Therefore, a computer model was developed to predict temperature as a function of time and applied voltage for any location in the die. The computer model is composed of three parts: a geometrical model to approximate the density and resistivity variations in the medium, a finite-element model to calculate the rate of resistive heating within each element, and a finite-difference model to calculate the temperature distribution based on solution of the heat-transfer equations. Predicted temperatures have been shown to be in excellent agreement with measurements, and numerical simulation provided encouraging consistency and reasonably accurate predictions of temperature profiles within the die. The model demonstrated the feasibility of a new process to achieve simultaneous application of pressure and heat to powder densification in Electroconsolidation.     

An efficient BIST method for non-traditional faults of embedded memory arrays

In this work, a built-in self-testing (BIST) method is proposed to detect nontraditional faults of embedded memory arrays for a system-on-chip (SoC) design. The nontraditional faults include single-cell read-sensitive faults and read coupling faults. The BIST method can efficiently deal with embedded memory arrays spatially distributed on the entire SoC chip. The concept of redundant read-write operations is applied to detect all embedded memory arrays with different sizes simultaneously. The redundant operations do not affect the fault coverage of all nontraditional faults discussed in this paper. The method has the advantages of low hardware overhead, short test time, and high fault coverage for nontraditional memory defects.     

Optimal virtual topologies for one-to-many communication in WDM paths and rings

In this paper we examine the problem of constructing optimal virtual topologies for one-to-many communication in optical networks employing wavelength-division multiplexing. A virtual topology is a collection of optical lightpaths embedded in a physical topology. A packet sent from the source node travels over one or more lightpaths en route to its destination. Within a lightpath, transmission is entirely optical. At the terminus of a lightpath the data is converted into the electronic domain where it may be retransmitted on another lightpath toward its destination. Since the conversion of the packet from the optical to the electronic domain introduces delays and uses limited physical resources, one important objective is to find virtual topologies which minimize either the maximum or average number of lightpaths used from the source to all destination nodes. Although this problem is NP-complete in general, we show that minimizing the maximum or average number of lightpaths in path and ring topologies can be solved optimally by efficient algorithms.     

Fundamental properties of radiation from a leaky mode excited on a planar transmission line

By using a specific normalization, it is shown that the TM/sub 0/ radiation field from a leaky mode that is excited by a source on any printed-circuit structure can be represented in a unified manner. The general properties of the normalized leaky-mode radiation field are examined in detail for a variety of phase and attenuation constants, as well as distances from the source, and for different types of source excitations. The normalized leaky-mode radiation field is compared to similarly normalized geometrical-optics and far-field radiation expressions to provide further insight into the nature of the radiation fields in the near- and far-field regions. The results provide a general view of leaky-mode radiation properties independent of the type of planar transmission line or background structure.