偏高岭土的研究现状及展望

简要介绍了偏高岭土的反应机理和在国内外的研究现状。同时对偏高岭土的研究进行了展望 ,提出因麦特林水泥原料丰富 ,污染小 ,加工简单 ,性能优越 ,其应用前景广阔 ,应对其加强研究。     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

超薄SiO2层的热生长

隧道小孔中超薄ＳｉＯ２的生长是ＥＥＰＲＯＭ电路制造的关键工艺之一。采用ＳＵＰＲＥＭ－Ⅲ工艺模拟程序对超薄ＳｉＯ２的热生长进行了工艺模拟，经过大量的工艺实验及优化，确定了超薄ＳｉＯ２的最佳生长条件，生长出的ＳｉＯ２性能良好，完全可满足ＥＥＰＲＯＭ研制的要求。     

Developing maintainable expert systems using case-based reasoning

Abstract: Maintainability problems associated with traditional software systems are exacerbated in rule-based systems. The very nature of that approach — separation of control knowledge and data-driven execution — hampers maintenance. While there are widely accepted techniques for maintaining conventional software, the same is not true for rule-based systems. In most situations, both a knowledge engineer and a domain expert are necessary to update the rules of a rule-based system. This paper presents, first, an overview of the software engineering techniques and object-oriented methods used in maintaining rule-based systems. It then discusses alternate paradigms for expert system development. The benefits of using case-based reasoning (from the maintenance point of view) are illustrated through the implementation of a case-based scheduler. The main value of the scheduler is that its knowledge base can be modified by the expert without the assistance of a knowledge engineer. Since changes in application requirements can be given directly to the system by the expert, the effort of maintaining the knowledge base is greatly reduced.     

Bioactivity of antifouling paints based on organotin toxicants

This paper discusses the bioactivity of antifouling paints based on organotin toxicants, such as tributyltin fluoride (TBTF) and triphenyltin fluoride (TPTF). These compounds were used alone or mixed as the main toxicant in formulations. The use of TPTF or mixtures of TPTF and TBTF, with vinyl binders, led to paints with satisfactory bioactivity during a 24 months immersion period. With the same binders, TBTF alone provided only 12 months of antifouling protection. The correlation coefficients calculated from the fouling attachment values and the rosin content in the binder showed that the bioactivity of the tested formulations depended on the solubility of the toxicant in sea water and on the composition and solubility of the binders.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

一种改进的共同进化遗传算法及其应用

将共同进化遗传算法应用于临床营养决策优化中,虽然取得了一定成果,但算法中仍存在早熟现象、局部搜索能量弱等问题,为此提出一种改进的共同进化模型。算法使用新的子群体划分方法和交叉算子,引入精英保留策略、信息交换原则和小生境技术。通过对糖尿病营养治疗的仿真表明,改进后的算法在保证群体多样性和避免早熟现象的前提下,提高了算法的局部和全局寻优能力,且膳食配方中营养素达标率符合要求,满足专家建议的糖尿病饮食需求。     

基于Dynaform的汽车液位传感器外壳拉深过程研究

针对拉深件在实际生产中所产生的拉裂、起皱等问题，利用有限元理论，运用Dynaform软件对汽车液位器外壳模型进行拉深的数值模拟，直观体现板材在拉深时的变化过程，对生产起到指导作用。     

缺血性糖尿病下肢病变的膝下动脉成形术

目的探讨膝下动脉的球囊成形术在治疗糖尿病缺血性下肢病变中的价值。方法对５３例糖尿病合并缺血性下肢病变患者６４侧缺血性下肢进行膝下动脉Deep球囊扩张成形术。对比患者手术前后临床症状的改变及足部溃疡的变化。结果５３例患者共１１９支动脉分支接受PTA治疗，５０例患者的１０１个分支成功地开通，技术成功率为８４．９％，所有５０例患者的临床症状均明显缓解，足部溃疡均变小，无需截肢。结论膝下动脉的球囊成形术是治疗缺血性糖尿病下肢病变安全有效的微创手段