2-氯-5-氯甲基吡啶在气升环流反应器中的合成研究

A new process for the direct chlorination of 2-chloro-5-methylpyridine to yield 2-chloro-5-chloro-methylpyridine in an airlift loop reactor (ALR) has been studied.Five main reaction conditions including TR,na/ns,cp,Qg and dD/dR were optimized.The average molar yield and purity of 2-chloro-5-chloromethylpyridine obtained were 79% and 98.5% respectively under the optimum operating conditions.Finally,the efficiency for the preparation of 2-chloro-50chloromethylpyridine with ALR and stirred tank reactor(STR) respectively was compared.     

PIV Investigations of Flow Patterns in the Entrance Configuration of Plate-fin Heat Exchanger

Flow characteristics in the entrance of plate-fin heat exchanger have been investigated by means of particle image velocimetry （PIV）. The flow field was measured using the two-frame cross-correlation technique. Streamline and velocity contour graphs at different cross-sections were obtained in the experiment. The experimental results indicate that flow maldistribution in the conventional header is very serious, while the improved header configuration with punched baffle can effectively improve the uniformity. The flow maldistribution parameter in plate-fin heat exchanger has been reduced from 1.21 to 0.21, and the ratio of the maximum velocity to the minimum is reduced from 23.2 to 1.8 by installing the punched baffle. The results suggest room for the optimum design of plate-fin heat exchanger.     

Study on pH‐sensitive and thermosensitive polymer networks containing polyacetal segments

A series of pH‐sensitive and thermosensitive polymer networks were first obtained by copolymerization of telechelic poly(1,3‐dioxolane) (PDXL) with acrylic acid (AA), acrylamide (AM), and N‐isopropylacrylamide (NIPAM), respectively. The copolymerization of PDXL diacrylate (PDXLDA) with AA, AM, or NIPAM is expected to lead to polymer networks in which homopolymeric segments of the monomer are connected by polyacetal segments. As a combination of these two parts, these polymer networks can have some interesting physical properties. For example, the copolymer networks of poly(AA‐b‐DXL) showed pH sensitivity, and both the copolymer networks of poly(AM‐b‐DXL) and poly(NIPAM‐b‐DXL) showed temperature sensitivity. Moreover, because of the low ceiling temperature of polyDXL, the networks containing polyacetal segments (PDXL) can degrade by treatment with a trace of appropriate cationic initiator. The polymer networks prepared were characterized by Fourier transform infrared, differential scanning calorimetry, and swelling data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3002–3006, 2002; DOI 10.1002/app.2329     

氮化硅反应烧结的研究进展

氮化硅作为高温功能陶瓷性能优越，但将其制备成陶瓷零件比较困难，目前一般用反应烧结法制备氮化硅陶瓷零件。此外，反应烧结制备氮化硅陶瓷还具有成本低、烧结温度低、产品成型好、陶瓷高温性能好等优点。综述了氮化硅陶瓷反应烧结工艺流程和工艺的优缺点，着重介绍了氮化硅反应烧结在成型工艺、烧结工艺、原材料影响、后处理和陶瓷增韧等方面所取得的进展。     

均匀橡胶弹性体隔声量的理论计算

由于材料在水声介质中的隔声性能的测试方法和测试设备较复杂，目前还没有在水声介质中的隔声量的标准测试方法。笔者从理论上研究了材料在水声介质中的隔声性能(隔声量)的计算方法，利用该方法计算了所合成的材料在不同厚度下的隔声量。计算结果表明：随着厚度的增加，材料的隔声量增加，但在低频下，当厚度增加到40mm以后，隔声量随厚度的增加而变化得很缓慢，在低频下不符合厚度每增加一倍，隔声量增加6dB这一规律。     

碱金属和锌对高炉用SiAlON结合刚玉砖的复合侵蚀

将高炉用SiAlON结合刚玉砖制成外部尺寸为50mm×50mm,内孔尺寸为25mm×25mm的坩埚,分别加入由Na2CO3、K2CO3、ZnO和宝钢高炉现场高炉灰配制的炉渣(其w(Na2O+K2O)=2.75%,w(ZnO)=5.1%)和用K2CO3、ZnO、石墨配制的炉渣(其w(Na2O+K2O)=25%,w(ZnO)=25%),然后分别在还原气氛下于1350℃16h和1100℃40h进行侵蚀试验。将侵蚀后的试样纵向对称剖开,观察渣对试样的侵蚀和渗透情况,进行SEM和EDAX分析。结果表明:碱金属和锌含量不同的两种炉渣对SiAlON结合刚玉砖的侵蚀速度都很小;碱金属侵蚀机理主要是SiAlON与碱蒸气反应生成钾霞石,与渣反应生成铁橄榄石,并参与硅酸盐玻璃相的生成;刚玉颗粒与渣中的FeO、Na2O和K2O反应生成铁铝尖晶石和少量针状β-Al2O3;锌对该砖没有产生明显的化学侵蚀。     

三氯氧磷交联木薯淀粉的消化性能及酶降解程度

采用In Vitro消化模型模拟人体消化道环境 ,对不同交联度 (DC)的三氯氧磷淀粉 (DC =3.70× 10 -5至 2 .2 7×10 -2 )的消化性能进行了研究 ;同时用微生素酶对三氯氧磷交联木薯淀粉进行生物降解并测定各个样品的抗酶解淀粉 (RS)含量。三氯氧磷交联变性处理对木薯淀粉的消化速度和生物降解程度的影响随交联度的不同而不同。高交联特别是使淀粉达到完全非晶化时对淀粉的消化速度和生物降解程度影响更大。     

积层线路板用液态感光成像油墨的应用研究

研究了积层线路板油墨的组成配方、制备和应用工艺,分析了不同预烘时间对油墨分辨率的影响以及过显和显影不足问题的形成,并从生产和实际操作的角度,提出了解决的方案。利用聚苯醚改性的环氧树脂,应用于油墨的配方中,改善了油墨固化后绝缘材料的耐热性、介电性等主要性能。油墨中改性环氧树脂的质量分数为13.0%时,固化后绝缘材料的玻璃化温度可达184.22℃,介电常数为3.19,介质耗损因数为0.019,可以作高频积层线路板的绝缘层。     

核苷酸生产技术现状及展望

核苷酸的生产方法主要有化学合成法、RNA酶解法、微生物发酵法以及生物催化法。探讨了这些方法的原理和发展及其在工业化生产中的优劣势。化学合成法的路线长、立体选择性差,所用试剂昂贵并有一定毒性,生产成本较高;酶解法能一次得到4种核苷酸的混合物且收率较高,是目前我国核苷酸工业生产所用的主要技术,但其后提取难度大,产品纯度不高;微生物发酵法难以解决细胞通透性的问题;生物催化法是发酵法的延伸,菌体培养和酶催化反应分两步进行,有效地解决了细胞通透性问题,并可以通过偶联不同的基因工程菌株生产多种复杂核苷酸、核苷糖乃至寡聚糖,这在核苷酸工业、医药及糖化学、糖生物学合成工业中是极其重要的一个环节。     

Robust Fault Diagnosis for Quadrotor UAVs Using Adaptive Thau Observer

A robust Fault Diagnosis (FD) scheme for a real quadrotor Unmanned Aerial Vehicle (UAV) is proposed in this paper. Firstly, a novel Adaptive Thau observer (ATO) is developed to estimate the quadrotor system states and build a set of offset residuals to indicate actuators’ faults. Based on these residuals, some rules of Fault Diagnosis (FD) are designed to detect and isolate the faults as well as estimate the fault offset parameters. Secondly, a synthetic robust optimization scheme is presented to improve Fault Estimation (FE) accuracies, three key issues include modeling uncertainties, and magnitude order unbalances as well as noises are addressed. Finally, a typical fault of rotors is simulated and injected into one of four rotors of the quadrotor, and experiments for the FD scheme have been carried out. Unlike former research works on the FD schemes for quadrotors, our proposed FD scheme based on the ATO can not only detect and isolate the failed actuators, but also estimate the fault severities. Regardless of roughness of the real flying data, the FD results still have sufficient FE accuracies.