义东油田大81-4块咸化湖泊生物礁储集层特征

义东油田位于济阳坳陷沾化凹陷义东断裂带，该油田大81—4块沙四段成化湖泊生物礁复合体自下而上可分为5个小型礁体(2个藻礁，3个藻礁丘体)。根据岩心观察、镜下鉴定和钻井等资料，主要有3种岩石类型：白云岩类是下部藻礁的主体，灰岩类是礁丘相的主体，其它岩类(主要为碎屑岩类和盐岩)分布局限；储集空间主要有7种类型(粒间孔隙、粒内孔隙、铸模孔隙、生长骨架孔隙、角砾间孔隙、晶间孔隙和构造裂缝）。该生物礁复合体位于凸起边缘的断阶带平台，发育于有陆源碎屑供给的半清水水域，紧邻深水区。礁体形成后经历了深埋藏成岩期，对储集空间演化影响最大的成岩作用是白云石化作用、溶解作用、新生变形作用和胶结作用。预测大81—221井区及附近的2个枝管藻白云岩礁体为最有利的勘探目标，义东22井附近生物礁也有良好的勘探前景。     

应用TEXTIO和MATLAB进行复杂数字系统仿真

在基于FPGA的复杂数字系统的仿真测试中,设计者常常面临各种挑战.以数字图像处理系统的仿真为例,如果采用完备性仿真测试方法,那么测试矢量的数量将是非常巨大的;如果采用常规方法,不仅效率不高,而且可能无法达到仿真测试的目的.针对这个难题,提出一种进行仿真测试的新方法,该方法应用TEXTIO和MATLAB来辅助仿真测试过程,使问题得到较好的解决.以电视图像实时多目标捕获单元的仿真测试为例,全面、细致地讨论这种新方法.     

提取地震信号高频信息方法的若干问题

岩性油气藏勘探已成为当代油气勘探的重要组成部分,因此提取地震资料高频信息已成为一个重要研究课题。文中对分辨率、分频处理地震信号、波阻抗反演中的一些问题进行了较深入的讨论,并得出以下认识:1要提高垂向和横向分辨率,必须设法提高野外采集地震资料的频率;2地震分频处理是偏移后提高分辨率的常用方法之一,这种方法应该限定在地震波的有效频带内,而超出有效频带,可能会带来很多假像;3低频合成地震记录中高频反射系数存在不确定性。在基于模型波阻抗反演的方法中,反演结果受初始模型的影响非常大,初始模型是依据测井资料建立的,初始模型与实际情况越接近,反演效果就越好;否则,会产生模型化的现象;4在相对波阻抗数据体(相当于地震数据体)作为约束条件下的SP测井参数协克里金插值是正演过程,消除了模型化的问题,使反演结果更接近真实情况,提高了砂层真实的分辨率。     

基于移动代理的网络拓扑发现研究

提出了一种基于移动代理的分布式网络管理系统模型,阐述了该系统发现网络拓扑的过程,介绍了具体算法思想,给出了数据结构和算法描述,最后进行了仿真,证明了算法的有效性.     

Curie Temperatures of III–V Diluted Magnetic Semiconductors Calculated from First-Principles in Mean Field Approximation

Electronic structure and ferromagnetism in III–V compound-based diluted magnetic semiconductors (DMS) are investigated based on first-principles calculations by using the Korringa-Kohn-Rostoker method combined with the coherent-potential-approximation. The stability of the ferromagnetic phase in GaN-, GaAs-, GaP-, GaSb-based DMS is investigated systematically. The calculations show that 3d-impurities from the first-half of the transition metal series favor the ferromagnetic state, while impurities from the latter-half of the series exhibit spin-glass behavior. This chemical trend in the magnetism is explained by the double exchange mechanism taking the local symmetry at the impurity gap states into account. Curie temperatures of GaAs- and GaN-based DMS are estimated by using the Heisenberg model in a mean field approximation with the parameters calculated from first-principles. It is suggested that room-temperature ferromagnetism can be realized in these systems.     

一个基于相邻像素兼容度的模糊加权平均滤波器

在文献[1]的基础上，提出几个改进的模糊加权平均滤波器。本文的方案不仅同时考虑了相邻像素对中心像素的兼容性以及中心像素对相邻像素的兼容性，而且还考虑到了权系数对局部环境的适应性。实验结果表明，该方法相比文献[1]中的模糊加权平均滤波器以及标准的均值滤波器、中值滤波器在噪声消除与边缘保留方面具有更好的性能。     

Towards implementation of a nickel silicide process for CMOS technologies

In this paper, we review some of the advantages and disadvantages of nickel silicide as a material for the electrical contacts to the source, drain and gate of current and future CMOS devices. We first present some of the limitations imposed on the current cobalt silicide process because of the constant scaling, of the introduction of new substrate geometries (i.e. thin silicon on insulator) and of the modifications to the substrate material (i.e. SiGe). We then discuss the advantages of NiSi and for each of the CoSi₂ limitations, we point out why Ni is believed to be superior from the point of view of material properties, miscibility of phases and formation mechanisms. Discussion follows on the expected limitations of NiSi and some of the possible solutions to palliate these limitations.     

不同注F剂量与CMOS运放电路辐照损伤的相关性

在不同注F剂量条件下,对P沟和N沟两种不同差分对输入CMOS运放电路的电离辐照响应进行了研究.分析比较了注F和未注F运放电路电离辐照响应之间的差异.结果表明,在栅场介质注入适量的F,可有效抑制辐照感生的氧化物电荷尤其是界面态的增长,从而提高CMOS运放电路的抗辐照特性.     

高功率脉冲水中放电的应用及其发展

首先介绍了高功率脉冲水下放电的机理，然后综合论述了其应用和研究的状况，从较为成熟的脉冲水处理技术到医疗领域的ESWL应用技术，以及在脉冲电场食品杀菌和水下目标探测方面的最新发展和研究，最后指出了高功率脉冲电技术应用前景以及进行更系统和深入研究的必要性。     

Discrete Wavelet Transform: Architectures, Design and Performance Issues

Due to the demand for real time wavelet processors in applications such as video compression [1], Internet communications compression [2], object recognition [3], and numerical analysis, many architectures for the Discrete Wavelet Transform (DWT) systems have been proposed. This paper surveys the different approaches to designing DWT architectures. The types of architectures depend on whether the application is 1-D, 2-D, or 3-D, as well as the style of architecture: systolic, semi-systolic, folded, digit-serial, etc. This paper presents an overview and evaluation of the architectures based on the criteria of latency, control, area, memory, and number of multipliers and adders. This paper will give the reader an indication of the advantages and disadvantages of each design.