Global Search Method for Locating General Slip Surface Using Monte Carlo Techniques

Searching for the critical slip surface and the lowest factor of safety in slope stability analysis can be achieved by means of optimization techniques. A new search procedure in generating kinematically admissible slip surfaces has been introduced in this paper. Such a procedure is based, mainly, on the Monte Carlo methods, where both the critical global slip surface as well as its associated factor of safety is determined. Several practical examples, of known minimum factor of safety and its associated slip surface, have been used to demonstrate the efficiency and capability of the proposed method. The method is intended to be robust and effective to solve problems that involve extremely complicated slope geometry. It is as powerful as any other powerful optimization methods.     

Influence of Clay Lens on Migration of Light Nonaqueous Phase Liquid in Unsaturated Zone

This study concerns the control of movement of light nonaqueous phase liquid (LNAPL) in unsaturated zone in the presence of relatively low permeability clay lens. A two-dimensional, finite-difference numerical model for the simultaneous movement of LNAPL and water through the unsaturated zone of the soil has been developed. The system is a three fluid phase system (water, LNAPL, and air) but in the derivation of the model, air was treated as an immobile phase at constant atmospheric pressure. The flow equations for LNAPL and water were cast in terms of the wetting and non-wetting fluid pressure heads, respectively. The finite-difference equations were solved implicitly with explicitly scheme using Newton-Raphson iteration with Taylor series expansion to treat nonlinearity. A physical model to represent the infiltration of kerosene above the clay lens was constructed. The numerical results were compared with those observed experimentally. The results of all tests showed that the presence of clay lens controls the vertical movement of LNAPL in heterogeneous porous medium.     

Investigation of Efficiency Deterioration Causes in Process Centrifugal Compressor Operation

The high operating efficiency of centrifugal compressor is a basic requirement to maintain the gas productivity and machine availability. However, there are several factors influencing the stage efficiency in the operating environment leading to a deterioration in the compressor performance in addition to its impact on the mechanical integrity of the internal components. These variables can be classified into three main groups which are suction parameters variation, flow profile distortion, and compressor component damage. The determination of the root cause will help for a proper maintenance plan and to reduce the machine downtime. Hence, this paper will introduce a new approach to identify the inefficient compressor operation causes based on the available operation data. The investigated case is a three-stage gas transport centrifugal compressor driven by 2.9 MW two-shaft gas turbine. The outcomes from the conducted optimisation are compared with the measured discharge parameters and the findings from the internal inspection observation to emphasize the outcomes from the derived approach.     

Tribological properties of dispersed carbon nanotubes in lubricant

This study examined the tribological properties of two lubricating oils, mobil gear 627 and paraffinic mineral oils, with multi-walled carbon nanotubes (MWCNTs) nanoparticles used as additives with various concentrations (0.1, 0.5, 1, and 2 wt.%). The friction and wear experiments were performed using a four ball tribotester. The samples were tested for their anti-wear, load carrying capacity, and friction coefficients according to ASTM D-2783, ASTM D-2596, and ASTM D-5183 standards. The experimental results show that the addition of MWCNTs to base oils exhibit good friction reduction and anti-wear properties. The wear test results show a decreased wear by 68% and 39% in the case of MWCNTs-based mineral oil as compared with base mobil gear 627 and paraffinic mineral oils, respectively. Furthermore, the friction reduction results show a decrease of friction about 57% and 49% in the case of MWCNTs-based mineral oil as compared with base mobil gear 627 and paraffinic mineral oils, respectively. The weld load of the base oil containing 1% MWCNTs was found to be 400 kgf and 125 kgf as compared with base mobil gear 627 and paraffinic mineral oils, respectively, which got welded at 200 kgf and 100 kgf. The morphologies and typical element distribution of the worn surfaces were characterized by scanning electron microscope (SEM) and energy-dispersive X-ray (EDX). The SEM micrographs and EDX chemical analysis confirm the formation of a tribolayer composed of the elements from the nanoparticles.     

Automated localization of retinal features

Retinal fundus images are widely used in the diagnosis and treatment of various eye diseases, such as diabetic retinopathy and glaucoma. A computer-aided retinal fundus image analysis could provide an immediate detection and characterization of retinal features prior to specialist inspection. This paper proposes an approach to automatically localize the main features in fundus images, such as blood vessels, optic disc, and fovea by exploiting the spatial and geometric relations that govern their distribution within the fundus image. The blood vessels are segmented by scale-space analysis. The average thickness of these blood vessels is then computed using the vessels centerlines and orientations from a Hessian matrix. The optic disc is localized using the circular Hough transform, the parabolic Hough transform fitting, and the localization of the fovea. The proposed method can be extended to establish a foveal coordinate system to facilitate grading lesions based on the spatial relationships between lesions and landmark features. The proposed method was evaluated on publicly available image databases, and the results have demonstrated a significant improvement over the current state-of-the-art methods.     

Detection of the effect of environmental toxicants on the synthetic peptide modified neural cell chip

A cell based chip was designed to differentiate and to detect the effects of environmental chemicals on the neurite outgrowth in PC12 cell. To fabricate platform of cell chip, gold surfaces were modified by RGD based synthetic oligopeptide. Nanoscale controlled self-assembled peptide layer was investigated by Atomic Force Microscopy (AFM). On the fabricated cell chip, PC12 cell was immobilized and the differentiation of neurite outgrowth in PC12 cells was done by neurite growth factor (NGF). Differentiation of PC12 cell was confirmed by immunofluorescence study. Further the differentiation and the length of neurite was confirmed by confocal microscopy study. Voltammetry behavior of the neurite induced PC12 and the electrochemical behavior of the environmental toxicants effect on the neurite outgrowth was measured by cyclic voltammetry (CV). Self-assembled layer mediated cell immobilization technique and voltammetric signal analysis system can be applied to construct the neural cell chip for the detection of large number of environmental toxins and various neurotoxicants.     

Chaotic Interleaving for Robust Image Transmission with LDPC Coded OFDM

To improve the error resilience and video quality over wireless networks, we propose a novel packet-level layer-based interleaving unequal forward error correction (LIU-FEC) method. First, a scalable layer-based interleaving architecture is proposed for improving the efficiency of FEC from successive packet losses in variable channel conditions. The interleaved transmission across different scalable layers can efficiently disperse the consecutive packet losses into different scalable layers. Second, a closed form FEC assignment solution is proposed for minimizing video quality degradation using simple layer-based error propagation metric in hierarchical prediction structure. The simulation results show that the proposed algorithm offers higher PSNR values in various channel status, compared to the conventional FEC algorithm.     

Development impacts on groundwater resources in Bahrain

The development process in Bahrain has led to a continuous depletion of its groundwater resources. The unplanned, excessive pumping of groundwater caused a sharp decrease in groundwater storage and the lowering of the aquifer's potentiometric levels by about 4 metres in the period from 1925 to 1991. As a result, more than half of the original groundwater reservoir has been completely polluted. Development activities will be hindered if the effects of these activities on the groundwater reservoir are not realized. In order to sustain the aquifer usefulness in the development process, the reservoir's natural balance must be re‐established. Therefore, the need for multi‐objective planning aiming at integrating Bahrain's limited water resources capacity and water demands is of paramount importance.     

All fiber on-axis coupling scheme between single mode fiber and GRIN fiber

In this paper we present a simple and novel method to maximize on-axis coupling efficiency to radially symmetric fibers without the need for extra free space optical elements. The method is based on inserting a segment of step-index multimode fiber (MMF), cleaved to a particular length, between the input fiber and the output fiber (OF). The MMF segment modifies the input field to match the guided modes in the OF. Using this technique we show that, by inserting an appropriate length MMF segment, it is theoretically possible to obtain a coupling coefficient as high as ?0.8 dB between a single mode fiber and a graded index ring-shaped fiber and ?0.32 dB for a multi-shell fiber. Our experimental measurements showed good agreement with theoretical predictions for the ring fiber.