Study of hydrogen diffusion in boron/germanium codoped optical fiber

Presents a novel technique for studying the dynamics of hydrogen diffusion in optical fiber. It shows that the hydrogen contributes directly to the effective refractive index of the fiber by its dielectric susceptibility. It provides a simple theory that relates the refractive index change to the total hydrogen concentration in the fiber core. It also deduces that there is a small contribution of less than 5% to the refractive index through the photoelastic effect. A low-finesse fiber Bragg grating Fabry-Perot interferometer allows the determination of the evolution of the hydrogen concentration in situ. The experimental results obtained for isothermal and isobaric diffusion between 45/spl deg/C and 90/spl deg/C yielded values for the parameters of Arrhenius-type expressions for the diffusivity, permeability, and solubility of hydrogen in germanium/boron codoped single-mode fiber. In addition, least squares curve-fits for outdiffusion yielded the gas-phase mass-transfer coefficient as a function of temperature.     

Systematic characterization of Cl2 reactive ion etchingfor improved ohmics in AlGaN/GaN HEMTs

Pre-metal-deposition reactive ion etching (RIE) was performed on an Al_0.3Ga_0.7N/AlN/GaN heterostructure in order to improve the metal-to-semiconductor contact resistance. An optimum AlGaN thickness for minimizing contact resistance was determined. An initial decrease in contact resistance with etching time was explained in terms of removal of an oxide surface layer and/or by an increase in tunnelling current with the decrease of the AlGaN thickness. The presence of a dissimilar surface layer was confirmed by an initial nonuniform etch depth rate. An increase in contact resistance for deeper etches was experienced. The increase was related to depletion of the two-dimensional (2-D) electron gas (2-DEG) under the ohmics. Etch depths were measured by atomic force microscopy (AFM). The contact resistance decreased from about 0.45 Ωmm for unetched ohmics to a minimum of 0.27 Ωmm for 70 Å etched ohmics. The initial thickness of the AlGaN layer was 250 Å. The decrease in contact resistance, without excessive complications on device processing, supports RIE etching as a viable solution to improve ohmic contact resistance in AlGaN/GaN HEMTs     

Reduced and differential parallel interference cancellation forCDMA systems

Since code division multiple access systems in multipath environments suffer from multiple access interference (MAI), multiuser detection schemes should be used in the receivers. Parallel interference cancellation (PIC) is a promising method to combat MAI due to its relatively low computational complexity and good performance. It is shown that the complexity of PIC is still high for realistic scenarios in terms of the symbol rate, the number of users, spreading gain, and multipath components. However, two novel methods are introduced to reduce significantly the complexity without sacrificing performance. The first approach, called reduced PIC, takes advantage of the composition of the interference to concentrate interference cancellation only on significant terms. The second approach, called differential PIC, exploits the multistage character of PIC to avoid unnecessary double calculations of certain terms in consecutive stages. It is shown that a combination of both approaches leads to a performance very close to the single-user bound whereas the complexity can be kept on the order of the conventional RAKE receiver     

A comparison between different PMD compensation techniques

We quantify the benefits of using different techniques for compensation of polarization mode dispersion (PMD) in fiber-optic communication systems by means of numerical simulations. This is done both with respect to PMD-induced pulse broadening and in terms of system outage probability for different data formats [nonreturn-to-zero (NRZ) and return-to-zero (RZ)]. Attention is focused on simple and relevant single- and double-stage post-transmission compensators with a few degrees of freedom (DOF). It is generally believed that a PMD compensator with a polarization controller and a variable delay line can only compensate the PMD to the first order. We show, from analytical results, the counterintuitive fact that this scheme can also partially compensate for higher order PMD. We also investigate the benefit of using a polarizer as compensation element where the optical average power can be used as a feedback signal     

High-bandwidth graded-index polymer optical fiber with high-temperature stability

A newly developed graded-index polymer optical fiber (GI-POF) with high-temperature and high-humidity stability was proposed. As it was found that the high numerical aperture and high glass transition temperature (T/sub g/) at the core center of the GI-POF were key issues to achieve both high-temperature and humidity stability, a partially fluorinated polymer material was adopted to obtain both characteristics in the GI-POF. The newly developed GI-POF had low-loss (140 dB/km at 650-nm wavelength), high-bandwidth (higher than 1 GHz for 100 m transmission), high-temperature and humidity stability at 70/spl deg/C, 80% relative humidity (R.H.) and low bending loss.     

Mode coupling contribution to radiation losses in curvatures for high and low numerical aperture plastic optical fibers

We have studied the optical power losses due to multiple curvatures in polymethylmetacrylate (PMMA) plastic optical fibers (POFs) of different numerical apertures (NAs) and attenuation. The fibers were tested for several configurations in order to assess the influence of different types of curved-to-straight fiber transitions in the amount of power radiation. We found that losses are below the standards for all tested fiber types, and thus, they are a suitable choice for local area network (LAN) applications. In addition, our results revealed the presence of modal interactions as confirmed using an experimental procedure to estimate the mode coupling strength for the same fibers.     

Generation of Technology-Independent Retargetable Analog Blocks

This paper introduces a complete methodology for retargeting of analog cells to different sets of specifications. This methodology is technology-independent, thus allowing the migration, from one technology to another, of the circuit under retargeting. Careful integration of the device sizing and layout generation tasks via the incorporation of layout constraints during the sizing process allows to generate fully functional designs in a few minutes. The methodology is illustrated via the retargeting of a fully-differential Miller-compensated two-stage operational amplifier for a new set of specifications and two different technological processes.An erratum to this article can be found at     

Reliability prediction models to support conceptual design

During the early stages of conceptual design, the ability to predict reliability is very limited. Without a prototype to test in a lab environment or without field data, component failure rates and system reliability performance are usually unknown. A popular method for early reliability prediction is to develop a computer model for the system. However, most of these models are extremely specific to an individual system or industry. This paper presents three general procedures (using both simulation and analytic solution techniques) for predicting system reliability and average mission cost. The procedures consider both known and unknown failure rates and component-level and subsystem-level analyzes. The estimates are based on the number of series subsystems and redundant (active or stand-by) components for each subsystem. The result is a set of approaches that engineers can use to predict system reliability early in the system-design process. Software was developed (and is discussed in this paper) that facilitates the application of the simulation-based techniques. For the specific type of system and mission addressed in this paper, the analytic approach is superior to the simulation-based prediction models. However, all three approaches are presented for two reasons: (1) to convey the development process involved with building these prediction tools; and (2) the simulation-based approaches are of greater value as the research is extended to consider more complex systems and scenarios     

用仿真工具优化车辆动力系统(一)

在本文的第一部分，介绍了一种理想的车辆动力系统的计算机辅助开发过程。它显示了现代仿真技术在产品持续发展过程中的作用，该技术采用硬件回路作非在线的仿真，并通过现代化的试验手段对车辆进行匹配。特别重要的是提供了将电控变速器和发动机控制单元综合的可能性。接着是在线仿真在诸如发动机和变速器模式方面的应用和发展，它是上述开发过程的基础。根据上述的方法论，本文论述了仿真技术已取得的成绩和将来的应用可能性。