基于NURBS的PDE曲面构造法研究及应用

由非均匀有理Ｂ样条曲线曲面给定边界条件，用偏微分方程来构造曲面，以参数“ａ”控制其整体形状，本文分析其思路原理及过程，并列举了在ＣＡＤ上的应用，最后分析了优缺点。     

34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

强化会计内部控制促进高校科学管理

建立和强化完善的会计内部控制体系,对于高校优化资源,促进科学管理有着重要意义.针对当前高校会计内部控制的不足,提出了若干解决对策.     

Gradient Boundary Detection for Time Series Snapshot Construction in Sensor Networks

In many applications of sensor networks, the sink needs to keep track of the history of sensed data of a monitored region for scientific analysis or supporting historical queries. We call these historical data a time series of value distributions or snapshots. Obviously, to build the time series snapshots by requiring all of the sensors to transmit their data to the sink periodically is not energy efficient. In this paper, we introduce the idea of gradient boundary and propose the gradient boundary detection (GBD) algorithm to construct these time series snapshots of a monitored region. In GBD, a monitored region is partitioned into a set of subregions and all sensed data in one subregion are within a predefined value range, namely, the gradient interval. Sensors located on the boundaries of the subregions are required to transmit the data to the sink and, then, the sink recovers all subregions to construct snapshots of the monitored area. In this process, only the boundary sensors transmit their data and, therefore, energy consumption is greatly reduced. The simulation results show that GBD is able to build snapshots with a comparable accuracy and has up to 40 percent energy savings compared with the existing approaches for large gradient intervals.     

基于Modbus协议的外输计量监控系统的设计与实现

原油的外输计量系统没有配套的上位机系统,其操作存在一定的缺陷。针对这种情况,在详细介绍了Modbus协议和CRC校验的基础上,提出了基于Visual Basic环境下与流量计算机通信的系统设计方案,在该设计中实现了基于Modbus协议的串口通信以及CRC校验。实际验证,该系统能够有效地解决原有问题。     

具有厚大断面的大型球墨铸铁铸件的生产

首先通过电炉—LF精炼炉—VD精炼炉—包内球化的工艺路线获得了足够的优质铁液,然后通过选取合适的分型面、设置合理的浇注系统、设计专用的冷铁、安放足够大的保温冒口和上表面加大加工余量来去除夹渣等措施,成功生产了具有厚大断面的大型球墨铸铁铸件。     

钒微合金Φ25mm热轧左旋带肋钢筋的研制与生产

通过对热轧左旋带肋钢筋（HRBL600）的质量特性分析,制定了热轧左旋带肋钢筋的化学成分,孔型设计方案和生产工艺。生产实践证明：该产品开发获得成功,产品质量达到标准要求。