Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation

Representative and quantitative microstructural information of cement-based materials can be obtained in the backscattered electron and X-ray modes of the scanning electron microscope (SEM). One prerequisite, of several, is to use flat specimens. Microstructures that are minimally affected by the grinding and polishing necessary to produce the flat surface can be obtained. It is essential to fill the pores of the specimen with epoxy resin prior to grinding and polishing. After hardening, the epoxy stabilizes the microstructure and enables it to withstand the stresses of grinding and polishing without alteration. In the present paper, we describe a preparation technique that we consider to have produced excellent polished specimens. The importance of epoxy impregnation is demonstrated.     

Identification of organochlorines and organobromines in coals

Four Chinese bituminous coals were extracted with CS₂, n-hexane, benzene, methanol, acetone, tetrahydrofuran (THF) and THF/methanol (1: 3 vol/vol) mixed solvent sequentially. The resulting 28 extracts were analyzed with GC/MS. Six organochlorines (OCs) and two organobromines (OBs) were identified in eight extracts from the coals. Our experiments provide, for the first time, the information on the molecular structure of OCs and OBs in coals.     

Epoxy resins toughened with in situ azide–alkyne polymerized polysulfones

To simultaneously improve the fracture toughness and heat resistance of a cured toughened epoxy resin along with a reduction in its viscosity during the mixing process, two novel polysulfone‐type polymers are synthesized via azide–alkyne polymerization for use as toughening agents. The epoxy resin toughened with these polymers by in situ azide–alkyne polymerization during the cure process, which shows excellent processibility and based on the significantly lower viscosity (61 and 62 cP) during epoxy mixing process than that of commonly commercial polyethersulfone (PES, 127,612 cP). The novel polysulfone‐type polymer toughened epoxy resin showed the advantage in excellent fracture toughness than the PES toughened epoxy. In addition, the glass transition temperature of the novel polysulfone‐type polymer toughened epoxy resin is similar to that of the neat one (～230 °C) and does not decrease, which implies excellent heat resistance of the toughened epoxy. These phenomena can be attributed to the formation of semi‐interpenetrating polymer networks comprising the epoxy network and the linear polysulfone‐type polymers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45790.     

Benzene Alkylation with 1-Dodecene over H-Mordenite Zeolite

The alkylation of benzene with 1-dodecene was studied over solid-acid zeolites, such as H-mordenite, H-USY, HY, and H-ZSM-5, in a batch reactor at 140°C and 10 atm. H-mordenite showed the highest selectivity of 78.2% for 2-phenyldodecane with 100% conversion. Depending on the catalyst amount (from 0.5 to 1.0 g) and the molar ratio of benzene to 1-dodecene (from 7 to 10), the conversion of 1-dodecene varied in the range from 63.8 to 100%. Furthermore, modification of H-mordenite by dealumination using nitric acid and by solid ion exchange with Mg²⁺ and Fe³⁺ ions led to the improvement of the selectivity for 2-phenyldodecane, and simultaneously reduction of the conversion of 1-dodecene is observed. In addition, it was found by pyridine adsorption FT-IR study that both strong Brønsted and Lewis acid sites are closely related to the conversion.     

Effects of various roasting conditions on acrylamide,acrolein, and polycyclic aromatic hydrocarbons content in cocoa bean and the derived chocolates

The effect of roasting parameters such as the temperature (135 and 150°C) and relative humidity of air (RH of 0.3 and 5.0%) on acrylamide, acrolein, and polycyclic aromatic hydrocarbon (PAH) levels in whole and crushed cocoa beans and chocolates derived from these beans was studied. Acrylamide was identified in all tested samples of roasted cocoa beans, irrespective of process conditions. Its contents in chocolates produced from these beans were similar. The highest acrylamide concentration was found in whole cocoa beans roasted at 135°C and RH of 5.0%. Small amounts of acrolein were present only in the roasted whole cocoa beans while neither the roasted crushed cocoa beans nor chocolates contained this aldehyde. Roasting conditions significantly affected the profile and content of PAHs in whole and crushed cocoa beans and the richest in PAHs were crushed cocoa beans roasted at 150°C and RH of 5.0%. The chocolates obtained in this study contained significantly higher concentrations of PAHs than the roasted cocoa beans used for their production. The results of the study demonstrate that optimization of roasting conditions may reduce levels of all these harmful substances in cocoa beans.     

The Effect of Path Diffusion on The Effective Moisture Diffuslvlty in Carrot Slabs

ABSTRACT

In order to evaluate the effect of path diffusion on the average moisture diffusivity in carrot. drying curves for different shaves (slices and cylinders) and temperatures of 50, 60 and 70°C were ohtained takine into consideration the use of an average leneth of carrot sample (slice thickness or the cylinder radio). The. results showed significant differences betuecn radial and axial average diffusivities. Significant differences were also observed between core and annular diffusivity. The experimenta1 drying curves did not show enough evidence on the effect of drying temperature on the average moisture diffusivity.     

Dyes based on a 1,4‐naphthoquinone skeleton as new type II photoinitiators for radical polymerisation

Photoredox pairs consisting of 1,4‐naphthoquinone dyes and commercially available hydrogen donors (2‐mercaptobenzoxazole, 2‐mercaptobenzothiazole, 2‐mercaptobenzimidazole and 2,5‐dimercapto‐1,3,4‐thiadiazole) are found to be effective initiator systems for the radical polymerisation of trimethylolpropane triacrylate under visible light. The efficiency of these initiator systems is discussed in terms of the free energy change for the electron transfer process from the dye to the hydrogen donor. The results show that the photoinitiation ability of tested photoredox pairs depends on the structure of both the dye and the hydrogen donor.     

Tack and Shear Strength of Adhesives Prepared from Styrene-Butadiene Rubber (SBR) Using Gum Rosin and Petro Resin as Tackifiers

Tack and shear strength of styrene-butadiene rubber (SBR)-based pressure-sensitive adhesive were studied using gum rosin and petro resin as the tackifiers. The concentration of the tackifying resin was varied from 0 to 100 parts per hundred parts of rubber (phr). Toluene was used as the solvent throughout the experiment. The rolling ball technique was used to measure the tack of the adhesive, whereas, shear strength was determined by a TA-HDi Texture Analyser. Results show that the tack of the adhesive increases with increasing tackifier loadings for both tackifier systems. However, shear strength indicates the reverse behavior with increasing resin content, an observation which is attributed to the decrease in cohesive strength as the tackifier concentration is increased. Both tack and shear strength of the adhesives increases with molecular weight of SBR. Adhesive containing petro resin consistently exhibits higher values than the gum rosin system due to better wettability and compatibility in the former system.     

Chemical Analysis with High Spatial Resolution by Rutherford Backscattering and Raman Confocal Spectroscopies: Surface Hierarchically Structured Glasses

Copper and iron in glasses constitute classical aims of study because of the optical effects that they produce. Structured materials are also interesting due to the incorporated functionalities derived from their spatial organization. Here, CuO and Fe₂O₃ were incorporated into a standard glass, from which glass coatings with different thicknesses were studied. Whereas iron cations dissolved in the glassy matrix, copper cations saturated it and crystallized at the surface, forming a hierarchical microstructure. The surface microstructure consisted of crystallizations of Tenorite (CuO) forming interconnected walls. The walls surrounding areas of glassy matrix gave rise to a cells microstructure. Rutherford Backscattering Spectrometry provided the composition of the samples with high depth resolution, and Raman Confocal Microscopy determined the phases location and their distribution forming the microstructure. The joint information from both techniques allowed high chemical and spatial resolution of the main cations location for the hierarchical surface microstructure.