南极假丝酵母脂肪酶发酵条件优化及酶学性质

分别用摇瓶和15L发酵罐,对南极假丝酵母产胞外脂肪酶的培养基成分和操作条件进行了实验研究。得到最优的培养基组成为:豆粉40g／L,淀粉15g／L,豆油5mL／L,K2HPO4g／L,MgsO4·7H2O1g／L,Tween-800.1％,酵母膏5g／L;操作条件为:温度24℃,初始pH值为6.0,通气量为10.0L／min。在此培养条件下,发酵周期缩短至54h。由15L发酵罐生产的酶液酶活达到19.2U／mL。酶液在pH值为4.0～6.0和7.5～9.0范围内较稳定,其最适宜pH值范围为6～8.5;70℃时酶的催化活性最大.在40～70℃的温度范围内保持1h后残留酶活为60％。     

YS-842催化剂在Hypol工艺PP中试装置上的应用

将Ziegler-Natta高效载体催化剂YS—842在Hypol工艺聚丙烯(PP)中试装置上进行应用考核，考察了该催化剂的适应性及共聚合性能。试验表明，YS—842催化剂活性高(达1．2Mg／g)、寿命长、氢调敏感性好：用YS—842催化剂生产的聚合物流动性好，粒径分布窄，细粉少，平均粒径为640μm；等规指数大于98．5％，堆密度大于0．45g／mL；试生产的F401、J340，其机械性能与使用进口催化剂生产的产品相当。     

胺烷基化聚羟基酸酰胺类超分散剂的研制及应用

对胺烷基化聚羟基酸酰胺的合成方法进行研究，确立了反应条件与制得的聚羟基酸酯特征之间的一些相互关系。并为获得适当长度的聚酯链选择了最佳合成条件。同时扼要论述了这类超分散剂的结构特性，以及对于颜料粒子表面吸附作用、分散体系的稳定作用以及对涂料、油墨生产的重要意义。     

NDN-1型氮氧化物脱除催化剂的评价及应用

对NDN-1型氮氧化物脱除催化剂进行了实验室性能评价,并与进口催化剂A及国产催化剂B进行了比较,结果表明,NDN-1型催化剂的化学组成、结构、性能均优于进口催化剂A。介绍了该催化剂在南京帝斯曼东方化工有限公司工业应用的情况。     

新型实用旋膜蒸发器与流程

旋转薄膜蒸发器又名刮抹薄膜蒸发器或搅拌薄膜蒸发器。文内择要讨论了原有设备及流程的特点与不足，以及为解决这些不足而开发出的新型设备与流程。     

在役加氢反应器材料损伤分析

基于随加氢反应器运行 5a的试验试块 ,研究了加氢反应器运行 5a后筒体材料 2 .2 5Cr 1Mo钢的损伤。进行了化学成分分析、拉伸和冲击试验、脱氢和脱脆试验以及断口形貌分析。结果表明 :反应器运行 5a后筒体母材及其焊缝金属的拉伸性能未发生明显变化 ,而冲击韧性明显降低 ,且焊缝金属损伤程度较母材严重。经分析 ,材料的损伤主要是加氢反应器长期使用过程中高温回火所致     

高效广谱微生物复合破乳剂的制备及其应用

为解决破乳剂的选择性强、破乳效率低的问题,采用化学破乳剂和微生物破乳剂复合的方法,研制出了广谱、高效、低成本的破乳剂,并用大庆三次采油采出液、塔河原油、南阳原油、蓬莱原油、俄罗斯混合原油进行了脱水、脱盐评价。结果表明:对于大庆油田采出液,微生物复合与化学破乳剂比较,脱水效率提高5%以上,脱出水含油可降低40%以上;对于易乳化的南阳原油、蓬莱原油,脱后含盐可达3 mg/L以下,脱出水含油可降低50%以上。工业应用表明:对于俄罗斯混合原油脱后含盐可达2 mg/L以下,脱出水含油可降低70%以上,脱后排水含油小于15 mg/L。所研制的微生物复合破乳剂适应性强,成本可降低20%~50%。     

“LOGO”在塑料机械中的应用

把可编程控制器“PLC”中“LOGO”集成块应用于塑料机械中,把可编程序输入到“LOGO”,来表达电器线路对塑料制品的记数和裁刀部分进行自动控制。     

A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion

This article investigates the basic combustion parameters including start of the ignition timing, burn duration, cycle-to-cycle variation, and carbon monoxide (CO), unburned hydrocarbon (UHC), and nitric oxide (NO_x) emissions of homogeneous charge compression ignition (HCCI) engines fueled with primary reference fuels (PRFs) and their mixtures. Two primary reference fuels, n-heptane and iso-octane, and their blends with RON25, RON50, RON75, and RON90 were evaluated. The experimental results show that, in the first-stage combustion, the start of ignition retards, the maximum heat release rate decreases, and the pressure rising and the temperature rising during the first-stage combustion decrease with the increase of the research octane number (RON). Furthermore, the cumulative heat release in the first-stage combustion is strongly dependent on the concentration of n-heptane in the mixture. The start of ignition of the second-stage combustion is linear with the start of ignition of the first-stage. The combustion duration of the second-stage combustion decreases with the increase of the equivalence ration and the decrease of the octane number. The cycle-to-cycle variation improved with the decrease of the octane number.     

Mass transport effects on the electrodeposition of iron-nickel alloys at the presence of additives

Iron-nickel (Fe-Ni) plating bath solution chemistry was studied by determining the Fe-Ni equilibrium concentrations at various pH levels. It was found that the alloy composition is determined by solution equilibria, mass transfer of the electroactive species within the diffusion layer and by the surface coverage of the additives on the electrode. The effect of the rotation speed of the disc electrode and the presence of organic additives on the deposition of Fe-Ni alloys are evaluated. Boric acid increases the absolute iron deposition rate, while it inhibits the rate of nickel reduction. Saccharin and ethylene diamine influence the metal deposition rate but are not as effective as boric acid.