Crystallization studies of semi-crystalline polymers under oscillatory shear using the rheometrics mechanical spectrometer

A method has been developed on the Rheometrics mechanical spectrometer using the eccentric rotating disks mode to study the crystallization kinetics of different semi-crystalline polymers (polyethylene, polypropylene, poly(butylene terephthalate) and Nylon 11) under oscillatory shear. Dynamic shear moduli (storage G′ and loss G″), loss tangent (tan δ), and dynamic viscosity (η′) were simultaneously, monitored during the crystallization process. The onset and completion of crystallization were characterized by the initial rise and final levelling off of G′, while the peak time, of crystallization (t_p) is calculated from the time elapsed between the onset and peak of crystallization which is indicated by the G″ or η′ maximum. In the case of polypropylene, going from a low frequency of ?0.1 rad/s, to higher frequencies of up to 10 rad/s, there is a monotonic decrease in peak time of crystallization (t_p) together with a progressive decrease in spherulitic morphology. The observed acceleration in crystallization is due predominantly to the increase in nucleation rate and orientation of chains in melt crystalline aggregate. The progressive disappearance of the spherulitic morphology is attributed to the disruption of the spherulite superstructure at higher frequencies of shear.     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.     

The onset of Taylor-Görtler vortices in impulsively decelerating swirl flow

The onset of hydrodynamical instability induced by impulsive spin-down to rest in a cylinder containing a Newtonian fluid is analyzed by using propagation theory. It is well-known that the primary transient swirl flow is laminar, but with initial high velocities secondary motion sets in at a certain time. The dimensionless critical time Τ_c to mark the onset of instability is presented here as a function of the Reynolds number Re. Available experimental data indicate that for large Re deviation of the velocity profiles from their momentum diffusion occurs starting from a certain time Τ≈4Τ_c. This means that secondary motion is detected at this characteristic time. It seems evident that during Τ_c⪯Τ⪯4Τ_c, secondary motion is relatively very weak and the primary diffusive momentum transfer is dominant.     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

Thermal runaway prevention in catalytic packed bed reactor by solid temperature measurement and Control

Magnetic crystallite thermometry has been used to measure the average nickel crystallite temperature in packed bed reactors during ethane hydrogenolysis, an exothermic reaction. The technique is based on the temperature dependence of the magnetic moment of dispersed nickel catalysts. Measurement of the average catalyst temperature is very useful for reactor control because of its shorter time constant compared with exit fluid temperature. Bed temperature control based on the exit fluid temperature, which has often been used as a control variable, is too slow to protect thermal runaway of the bed. The advantage of short time constant by measuring the average catalyst temperature has been incorporated with enhanced feedback control system to control the bed temperature and prevent the thermal runaway of the catalyst bed. An enhanced feedback control structure with supervisory action performed better than the classical proportional-integral control in runaway prevention when the two control schemes were compared with each other on the basis of the trippoint (incipient thermal runaway).     

A power-aware code-compression design for RISC/VLIW architecture

We studied the architecture of embedded computing systems from the viewpoint of power consumption in memory systems and used a selective-code-compression (SCC) approach to realize our design.Based on t...     

A model for studying LCAT reaction: In vitro cholesterol esterification in pig ovarian follicular fluid

Phosphatidylcholine acyltransferase (lecithin:cholesterol acyltransferase or LCAT; EC 2.3.1.43) activity was found to be present in pig ovarian follicular fluid (POFF), in addition to pig serum (PS). The cholesterol esterification rate in both POFF and PS is linear with incubation time up to 2 hr. The mean absolute rate of POFF-cholesterol esterification was 8.1±0.4 nmoles per ml per hr approximately one-fourth of that in PS. However, the fractional rate (percent of labeled cholesterol esterified per hr) of POFF-cholesterol esterification was similar to that observed in PS. There was little variation of absolute rate of cholesterol esterification in the fluid obtained from different sizes of follicles. Fatty acid or triacylglycerol did not participate in the reaction of cholesterol esterification in POFF. No appreciable change in enzymatic activity was found from storing POFF at 4 C for periods of time up to 24 hr or at −70 C up to 2 months, but activity was lost thereafter. On the other hand, PS showed a much longer period of stability (5 days at 4 C and 9 months at −70 C). A discrepancy between the fatty acid composition of cholesteryl esters formed by the LCAT reaction and the fatty acid composition at the C-2 position of phosphatidylcholine led us to propose a two-step mechanism for the LCAT reaction. It is concluded that the LCAT of POFF, as well as that of plasma, is specific for individual fatty acids rather than for the fatty acid composition of phosphatidylcholine. The fatty acid concentration of lysophosphatidylcholine decreased during prolonged incubation times (6 to 21 hr) suggesting that the increased lysophosphatidylcholine formed as a product of the LCAT reaction may be reused as substrate for the LCAT reaction or for hydrolysis by lysophosphatidylcholine hydrolase. Presented at the AOCS Meeting, New York, May 1977.     

A new possibility of photostabilization of polymers by keto-enol tautomerizm of some β-dicarbonyls with fluoro (-CF3) group

Summary It has been found that -dicarbonyl compounds such as 1-phenyl-butane-1,3-dione(benzoyl-acetone)and 4,4,4-trifluoro-phenylbutane-1,3-dione (benzoyl-trifluoroacetone) can effectively photostabilize photodegradation of polyisoprene in solutions containing protonic solvents (alcohols). The photostabilization mechanism is due to the photo-enolization reaction, during which absorbed UV radiation is consumed for the proceeding of this reaction. The photostabilization of formulations containing alcohol by -dicarbonyl compounds, has potential application in the protection of cosmetics against photoageing reaction.     

The optical properties of hot-pressed magnesium fluoride and single-crystal magnesium fluoride in the 0.1 to 9.0 μm range

A polycrystalline high-density magnesium fluoride, fabricated into plates or shapes by hot-pressing, exhibits high in-line transmittance from 2.5 to 6.0 m, and single-crystal magnesium fluoride extends from 0.1 to 6.0 m. The ultimate and practical transmittance of hot-pressed magnesium fluoride using intrinsic and extrinsic reflectance, absorptance and scattering mechanisms, are investigated. The intrinsic scattering mechanism due to the polycrystalline structure is basically responsible for the tremendous difference in transmittance in the short wavelength region of the spectrum. The in-line transmittance of polycrystalline and singlecrystal MgF₂ is discussed in terms of sample thickness.     

Modeling and Control of Hybrid-driven Gliding Motion for an Underwater Gliding Snake-like Robot

International Journal of Control, Automation and Systems - An underwater gliding snake-like robot (UGSR) combines the advantages of an underwater glider (UG) and an underwater snake-like robot...