隔焰辊道窑碳化硅板的研究

本文主要对隔焰辊道窑碳化硅板的配方选择、热震损伤、抗氧化性能和结构形状进行探讨.     

聚铝溶液pH值及盐基度的相关性研究

为聚铝溶液进行了ＰＨ值和盐基度的分析和估算,给出了聚铝溶液的极限ＰＨ值和极限盐基度与总溶解铝浓度的关系曲线,最终计算结果表明：在平衡条件下,聚铝溶液的ＰＨ值和盐基度具有相关性,即当基中一个参数发生变化时。另一个参数必然要发生相应的改变。     

Quantitative X-ray powder diffraction analysis of clay minerals in Australian coals using Rietveld methods

The mineralogy of clay-rich mineral matter isolated from a range of Australian bituminous coals has been evaluated in quantitative terms from X-ray powder diffraction (XRD) patterns using a Rietveld-based data processing technique. The chemical composition of coal ash derived from this mineral matter has been calculated and compared to the directly determined composition of the ash prepared from the same coal samples. Although there are some minor differences due in part to uncertainty regarding the actual composition of several minerals, the compositions indicated by the two methods show a relatively high correlation, suggesting that the Rietveld technique provides mineralogical analyses that are consistent with independently determined chemical data. Comparison of the normalised clay mineral percentages from the Rietveld analysis to quantitative interpretations based on a peak intensities in glycolated and heat-treated oriented aggregates of the respective clay fractions also shows a high correlation, confirming mutual consistency of the two different mineralogical analysis methods. Such quantitative mineralogical data are significant to a range of coal exploration, mining and utilization activities, including seam correlation, material handling and ash and slag formation in combustion processes.     

基于容器的Web运行环境轻量级虚拟化方法

Web运行环境、Web服务及Web应用的虚拟化是减轻Web操作系统安全风险的一种有效方法,然而Web运行环境的虚拟化仍然存在不少挑战,如：执行时间、资源负载和兼容性等。为解决Web操作系统在安全性、执行时间、资源负载和兼容性方面的问题,提出了一种Web运行环境轻量级虚拟化方法,采用Docker容器技术实现进程级别的隔离。本虚拟化方法可在一个基本内核上支持运行多种Web运行环境的容器。此外,为了减轻容器创建负载,提出了容器启动机制;为减轻系统资源负载,进行了系统的轻量化处理。在嵌入式设备的实验结果表明,该虚拟化方法在执行时间、资源负载及兼容性方面都具有较优表现。     

转盘反应器固定米根霉的L－乳酸发酵

研究了米根霉的固定化方法，研制了用吸附法固定米根霉的生物转盘反应器，考察了在该反应器中培养基组成及其它操作条件对Ｌ－乳酸发酵的影响。实验结果表明，应用吸附法固定化的米根霉及生物转盘反应器进行Ｌ－乳酸发酵具有发酵速率快，Ｌ－乳酸得率高及既能用于连续发酵又能用于间歇发酵等优点     

电纺直写制备聚己内酯支架形貌及精度

作为一种新型的微纳制造技术，熔体直写电纺被广泛用于组织工程支架的可控制备,有序的纤维沉积是该领域应用的前提条件。对于支架成型精度的探究，本文使用生物可降解材料聚己内酯（PCL），采用自行设计的熔体电纺三维可控成型设备进行实验，考察了纤维间距对二维并行纤维沉积形貌及成型精度的影响，以及纺丝电压和网格大小对三维网格结构形貌及精度影响。结果表明，随着并行纤维设定距离的增大，纤维的沉积误差减小，并最终趋于平稳。对于三维网格结构，随电压的增加，最大沉积层数量先增大后减小，当纺丝电压为6kV时达到最大沉积层数15层。成型精度误差先减小后增大，当纺丝电压为7kV时，精度最高误差小于5%。随设定网格边长的增大，沉积层数不断增大。成型精度逐渐提高，当网格边长大于等于1.5mm时，沉积误差趋于稳定，并维持在5%左右。     

Comparison of the construction of a 3-D model for human thromboxane synthase using P450cam and BM-3 as templates: implications for the substrate binding pocket

A 3-D model of human thromboxane A₂ synthase (TXAS) was constructedusing a homology modeling approach based on information fromthe 2.0 crystal structure of the hemoprotein domains of cytochromeP450BM-3 and P450cam. P450BM-3 is a bacterial fatty acid monooxygenaseresembling eukaryotic microsomal cytochrome P450s in primarystructure and function. TXAS shares 26.4% residue identity and48.4% residue similarity with the P450BM-3 hemoprotein domain.The homology score between TXAS and P450BM-3 is much higherthan that between TXAS and P450cam. Alignment between TXAS andthe P450BM-3 hemoprotein domain or P450cam was determined throughsequence searches. The P450BM-3 or P450cam main-chain coordinateswere spplied to the TXAS main chain in those sements where thetwo sequences were well aligned. These segments were linkedto one another using a fragment search method, and the sidechains were added to produce a 3-D model for TXAS. A TXAS substrate,prostaglandin H₂ (PGH₂) was docked into the TXAS cavity correspondingto the arachidonic acid binding pocket in P450BM-3 or camphorbinding site in P450cam. Regions of the heme and putative PGH2binding cavities in the TXAS model were identified and analyzed.The segments and residues involved in the active-site pocketof the TXAS model provide reasonable candidates for TXAS proteinengineering and inhibitor design. Comparison of the TXAS modelbased on P450BM-3 with another TXAS model based on the P450BM-3with another TXAS model based on the P450cam structure indicatedthat P450BM-3 is a more suitable template for homology modelingof TXAS.     

高效节能热泵错流多效蒸发复杂系统

为了大幅降低错流多效蒸发过程的能耗,首次将蒸汽喷射式热泵技术、冷凝水闪蒸和溶液闪蒸等3种节能措施同时运用到错流多效蒸发系统中,并建立了用矩阵方程描述的该系统的数学模型。模型具有很强的通用性,可实现热泵在任意效抽汽的功能,可简化为只有其中若干种节能措施组合或无上述节能措施的错流、并流、逆流多效蒸发系统的模型。在满足约束条件的前提下,模型存在最佳的热泵喷射系数和抽汽位置,同时采用上述3种节能措施且在最佳条件下模型是高效节能的。浓缩氢氧化钠溶液的热泵错流五效蒸发系统的模拟结果表明,当热泵的喷射系数为0.15、抽汽位置在第2效,采用冷凝水闪蒸和溶液闪蒸时系统节省的生蒸汽消耗量高达32.51%。     

自适应布谷鸟搜索算法

为了使布谷鸟搜索算法(Cuckoo Search,CS)在保持强大的全局搜索能力的同时,尽可能地提高局部搜索能力,在深入分析CS算法机理的基础上,将CS算法中影响布谷鸟搜索路径步长的参数β和布谷鸟蛋被发现(淘汰)的概率p_a由固定值改为随搜索过程自适应变化的动态参数,将越界的鸟窝折返回边界内、在当前代最优鸟窝附近的区域随机建立1个新的鸟窝、而非折返回边界上重新建立鸟窝,以提高算法的局部搜索能力和收敛速度。改进后的CS算法称为自适应布谷鸟搜索算法(Adaptive Cuckoo Search,ACS)。通过8个标准测试函数分别测试了CS算法和ACS算法的性能,结果表明,无论是简单的单峰函数还是复杂的多峰函数,无论是小型的低维函数还是大型的高维函数,ACS算法的寻优性能均超过CS算法。     

硬聚氯乙烯低发泡挤出成型研究

采用自由发泡挤出的方法研究了硬聚氯乙烯低发泡挤出成型的配方设计和工艺条件控制。讨论了稳定剂品种，改性剂品种和发泡剂用量对制品密度，泡孔结构以及外观表面的影响。还揭示了口模温度和螺杆转速与制品密度的关系。