基于自身可信度的低复杂度LDPC码位翻转解码算法

提出一种基于位翻转的低复杂度、便于硬件实现的LDPC码解码算法.该算法充分利用变量节点的本征信息来计算翻转判决函数,减少了对其它变量节点软信息的需求,因此大大降低了解码硬件实现的复杂度,同时保证翻转判决函数具有较高的可靠性.利用该算法,对RS-based LDPC码进行的仿真结果表明,改进算法的解码性能接近甚至略优于IMWBF算法.     

Construction of low-density parity-check codes by superposition

This paper presents a superposition method for constructing low-density parity-check (LDPC) codes. Several classes of structured LDPC codes are constructed. Codes in these classes perform well with iterative decoding, and their Tanner graphs have girth at least six.     

AlGaN/GaN HEMT 2DEG电致耦合模型的研究

传统计算AlGaN/GaN异质结二维电子气(2DEG)的方法是根据Hooke定律计算c轴方向压应变与拉应变,然后利用压电模量计算出不依赖于栅压的2DEG,称为非耦合模型计算.提出了一种电致耦合模型来计算2DEG,在计算过程中考虑到弛豫度与附加电场对材料压电效应的影响,结果发现,当Al组分x=0.30时,压电极化电荷密度低于传统方法的计算值,两种模型的计算值相差7.17%,由此可见,当电场作用于材料时,材料产生逆压电效应,最终导致压电极化电荷密度降低.     

深入教育改革探索培养创新人才的新思路

为培养适应２１世纪飞速发展的科技竞争需要的优秀人才,我们对现有培养模式所进行的教育改革中,作了一些尝试。吸取ＭＩＴ等国外著名大学的成功办学经验,总结我院在原有教改试点班工作中所取得的成绩,组建了ＭＩＴ电子信息试点班,并以此为突破口．寻求培养宽厚型创新人才的新思路,形成以信息为主线涉及多个学科基础理论的课程体系,带动面上教学。并论述了设立ＭＩＴ电子信息试点班的必要性和可能性,介绍了该试点班的培养目标和培养特色。     

双层反射膜空芯传能光纤

利用化学气相沉积法 ,在毛细石英管内沉积GeO2 Al双层反射膜结构 ,增加内表面膜的反射率 ,降低传输损耗 ,该光纤可传输功率大于 80W的连续CO2 激光     

一种改进的二阶沃尔特拉滤波器LMS算法

本文给出了一种辨识二阶活尔特拉系统的新的LMS算法，数值模拟表明，这种算法比快速卡尔曼滤波器的计算时间短，收敛速度快。     

Author's reply [to comments on 'AC impedance of an isolated flat conductor']

For original paper see Z. Zhihua and M. Weiming, IEEE Trans. Electromagn. Compat., vol.44, p.482-486, (2002). For comments paper see IEEE Trans. Electromagn. Compat., vol.45, p661-662, (2003). This reply states that the experimental results on several real circuits show that the capacitive effects are insignificant in computing the AC impedance of an isolated flat conductor. For an isolated flat conductor with dimensions 270 mm /spl times/100 mm/spl times/0.3 mm, the experimental data do not show any capacitive effect below 100 MHz.     

Electrical and Thermal Conductivity and Conduction Mechanism of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Alloy

Ge₂Sb₂Te₅ alloy has drawn much attention due to its application in phase-change random-access memory and potential as a thermoelectric material. Electrical and thermal conductivity are important material properties in both applications. The aim of this work is to investigate the temperature dependence of the electrical and thermal conductivity of Ge₂Sb₂Te₅ alloy and discuss the thermal conduction mechanism. The electrical resistivity and thermal conductivity of Ge₂Sb₂Te₅ alloy were measured from room temperature to 823 K by four-terminal and hot-strip method, respectively. With increasing temperature, the electrical resistivity increased while the thermal conductivity first decreased up to about 600 K then increased. The electronic component of the thermal conductivity was calculated from the Wiedemann–Franz law using the resistivity results. At room temperature, Ge₂Sb₂Te₅ alloy has large electronic thermal conductivity and low lattice thermal conductivity. Bipolar diffusion contributes more to the thermal conductivity with increasing temperature. The special crystallographic structure of Ge₂Sb₂Te₅ alloy accounts for the thermal conduction mechanism.